| № | Номер | Название | Опции | Альт |
|---|
| 1 | REF | INSTRUCTION | VALVE ASSEMBLY backhoe control, 7-spool, for correct assembly and components see Figure 8-082, models with extendable dipper or auxiliary hydraulics | | | 2 | 413-828 | BOLT,Hex, 1/2" - 13 x 1-3/4", Gr 5 | | | | 3 | 80679 | LOCK WASHER,1/20.507 CST ZND | WASHER, LOCK, 1/2" | | | 4 | 425-108 | NUT,1/2" - 13, Gr 5 | NUT, , Hex 1/2"-13, G5 | | | 5 | 413-624 | BOLT,Hex, 3/8" - 16 x 1-1/2", Gr 5 | hex, 3/8 NC x 1-1/2 inch | | | 6 | 492-11038 | LOCK WASHER,3/8" | | | | 7 | D52275 | WASHER,9.92mm ID x 31.75mm OD x 2.78mm Thk | flat, 25/64 x 1-1/4 x 7/64 inch, hardened | | | 8 | D52276 | ISOLATOR,10.16mm ID x 28.07mm OD x mm L | INSULATOR vibration | | | 9 | 495-81266 | WASHER,0.41" ID x 0.88" OD x 0.07" Thk | flat, 13/32 x 7/8 x 1/16 inch, if used | | | 10 | 218-5149 | ELBOW,45 Degree Elbow, 7/8" - 14 Male JIC x 1-1/16" - 12 Male ORB | 45º, 7/8"-14 flare x 1-1/16"-12 adj. O-ring, auxiliary section upper and lower ports, Incl. Ref 11 | | | 11 | 237-6012 | O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro | 12-1, 90 Duro, .924 ID x .116" Thk | | | 12 | 218-5063 | HYD CONNECTOR,7/8" - 14 Male JIC x 1-1/16" - 12 Male ORB | ADAPTER straight, 7/8-14 flare x 1-1/16-12 inch O-ring, bucket section upper and lower ports, Includes: Ref. 13 | | | 13 | 237-6012 | O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro | 12-1, 90 Duro, .924 ID x .116" Thk | | | 14 | D143317 | HOSE,15.88mm ID x 1350mm L | 1350 mm long, includes one metal hose sleeve, auxiliary section lower port to boom auxiliary right-hand tube | | | 15 | D143310 | HOSE,15.88mm ID x 1900mm L | 1900 mm long, includes one metal hose sleeve, auxiliary section upper port to boom auxiliary left-hand tube | | | 16 | D143311 | HOSE,15.88mm ID x 1525mm L | 1525 mm long, includes one metal hose sleeve, bucket section upper and lower ports | | | 17 | D147791 | PIPE | TUBE, right-hand side of boom to rear attachment hose | | | | Connecting hoses at dipper shall be supplied by the customer for use with their particular optional rear hydraulic attachment. | | | | 18 | D147789 | PIPE | TUBE, left-hand side of boom to rear attachment hose | | | | Connecting hoses at dipper shall be supplied by the customer for use with their particular optional rear hydraulic attachment. | | | | 19 | D140156 | TUBE | right-hand side of boom to bucket cylinder closed end hose | | | 20 | D140154 | TUBE | left-hand side of boom to bucket cylinder rod end hose | | | 21 | 218-777 | PLUG,1 1/16"-12, 37 Degree | hex, 1-1/16-12 inch flare, tube, not required when rear attachment hoses are installed | | | 22 | D149143 | SHIN | CLAMP boom tubes | | | 23 | 117-208 | SQUARE BOLT,3/8" - 16 x 1", Gr 8 | square head, 3/8 NC x 1 inch, grade 8 | | | 25 | 231-4116 | NUT,3/8"-16, GB | NUT hex, self-locking, 3/8 inch NC | | | 26 | D140303 | HOSE ASSY. | HOSE, 875 mm long, to closed end of bucket cylinder, Includes: Ref. 27 | | | 27 | 237-6012 | O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro | 12-1, 90 Duro, .924 ID x .116" Thk | | | 28 | D140302 | HOSE | 875 mm long, to rod end of bucket cylinder | | | 29 | D143846 | CLAMP | - Hose | | | 30 | 413-632 | BOLT,Hex, 3/8" - 16 x 2", Gr 5 | - hex, 3/8 NC x 2 inch | | | 31 | 492-11038 | LOCK WASHER,3/8" | | | | 32 | 425-106 | NUT,3/8"-16, Cl 5 | | | | 33 | 111-380 | CARRIAGE BOLT,Short NK, 3/8"-16 x 3 1/2", G2 | BOLT round head square neck, 3/8 NC x 3-1/2 inch, full thread | | | 34 | D140188 | ANGLE | PLATE anchor, mounts hoses to underside of dipper frame | | | 35 | D140187 | SPACER | hose | | | 36 | D140189 | WASHER | special | | | 37 | 425-106 | NUT,3/8"-16, Cl 5 | | | | 38 | D149143 | SHIN | CLAMP hose | | | 39 | 492-11038 | LOCK WASHER,3/8" | | | | 40 | D149144 | CLAMP | tube | | | 41 | 117-209 | SQUARE BOLT,3/8" - 16 x 1 1/4", Gr 8 | square head, 3/8 NC x 1-1/4 inch, grade 8 | | | 42 | 231-4116 | NUT,3/8"-16, GB | NUT hex, self-locking, 3/8 inch NC | |
|
|