| № | Номер | Название | Опции | Альт |
|---|
| 1 | D128803 | ROD | - offset, antirollback, offset no longer used, for service order straight D133376 rod, D133377 tube, and D133375 lever (Ref. 1A, 4A and 9A) | | | 1a | D133376 | ROD | - straight, antirollback | | | 2 | 495-11053 | WASHER,1/2", SAE | | | | 3 | 432-816 | COTTER PIN,1/8" x 1" | 1/8" x 1" | | | 4 | D128801 | TUBE | - offset, antirollback rod to upper pivot lever, offset no longer used, for service order straight D133376 rod, D133377 lever (Ref. 1A, 4A and 9A) | | | 4a | D133377 | TUBE | - straight, antirollback rod to upper pivot lever | | | 5 | D129972 | SLEEVE CYLINDER | SLEEVE - clamp | | | 6 | D71880 | CLAMP,22.23mm | - tube to rod, includes bolt, washer, and nut | | | 7 | 427-6106 | CLEVIS PIN,9.53mm OD x 26.92mm L | PIN, CLEVIS, 3/8" x 1 1/16" | | | 8 | 432-610 | COTTER PIN,3/32" x 5/8" | PIN, SPLIT (COTTER), 3/32" x 5/8" | | | 9 | D128806 | LEVER | - upper pivot, used with offset rod and tube (Ref. 1 and 4), offset no longer used, for service order straight D133376 rod, D133377 tube, and D133375 lever (Ref. 1A, 4A and 9A) | | | 9a | D133375 | LEVER | - upper pivot, used with straight rod and tube (Ref. 1A and 4A) | | | 10 | 219-57 | LUBE NIPPLE,90 Degree Elbow, 1/4" - 28 NPTF | FITTING - grease, 90 degree, 1/4" - 28 NF taper | | | 11 | D72099 | SPRING | - upper pivot | | | 12 | D86652 | SLEEVE | - upper pivot lever | | | 13 | 413-1088 | BOLT,Hex, 5/8" - 11 x 5-1/2", Gr 5 | - hex head, 5/8" - 11 NC x 5-1/2", plated | | | 14 | T53567 | BEARING WASHER,16.66mm ID x 33.33mm OD x 3.43mm Thk | WASHER - flat, 5/8", hardened, plated | | | 15 | D131281 | ROD | - self-leveling | | | 16 | 425-156 | JAM NUT,Jam, 3/8"-24, G5 | - hex, jam, 3/8" - 24 NF, plated | | | 17 | 213-4 | ADJUSTABLE CLEVIS,3/8"-24 x 2 1/2" | CLEVIS - 3/8" | | | 18 | 427-6106 | CLEVIS PIN,9.53mm OD x 26.92mm L | PIN, CLEVIS, 3/8" x 1 1/16" | | | 19 | 432-610 | COTTER PIN,3/32" x 5/8" | PIN, SPLIT (COTTER), 3/32" x 5/8" | | | 20 | D131278 | SHAFT | - middle | | | 21 | D128811 | LEVER | - to middle shaft | | | 22 | 38-32432 | PIN,3/8" x 2", Coiled | heavy duty, lever to shaft 3/8" x 2", Coiled | | | 23 | D128817 | ROD | - connecting, Serial Range: middle-lower | | | 24 | 427-8136 | CLEVIS PIN,1/2" x 1.360" | PIN - clevis, 1/2", plated | | | 25 | 432-816 | COTTER PIN,1/8" x 1" | 1/8" x 1" | | | 26 | D128814 | LEVER | - lower pivot | | | 27 | 219-57 | LUBE NIPPLE,90 Degree Elbow, 1/4" - 28 NPTF | FITTING - grease, 90 degree, 1/4" - 28 NF taper | | | 28 | D86653 | BUSHING | SLEEVE - lower pivot lever | | | 29 | 413-1048 | BOLT,Hex, 5/8" - 11 x 3", Gr 5 | | | | 30 | L103591 | ROD | - connecting, lower pivot, Serial Range: lever-bellcrank | | | 31 | 213-6 | ADJUSTABLE CLEVIS,1/2"-20 x 3" | CLEVIS - 1/2" | | | 32 | 425-158 | JAM NUT,Jam, 1/2"-20, G5 | | | | 33 | 427-8136 | CLEVIS PIN,1/2" x 1.360" | PIN - clevis, 1/2", plated | | | 34 | 432-816 | COTTER PIN,1/8" x 1" | 1/8" x 1" | | | 35 | L103614 | DIPPER | BELLCRANK - antirollback control | | | 36 | 100-13112 | SNAP RING,#112, Ext, Crescent | Ring, Snap, , special, used as a spacer #112, Ext, Crescent | | | 37 | 495-11106 | WASHER,1", SAE | - flat, 1", plated | | | 38 | D25984 | PIN | - pivot | | | 39 | D25277 | SNAP RING,23.5mm ID x 2.62mm Thk | RING - retaining, pivot pin | |
|
|