| № | Номер | Название | Опции | Альт |
|---|
| 1 | REF | INSTRUCTION | VALVE ASSEMBLY - equipment control, for correct assembly and components see Figures 8-108 through 8-114 | | | 2 | 218-5078 | HYD CONNECTOR,7/8" - 14 Male JIC x 1-5/16" - 12 Male ORB | ADAPTER - straight, 7/8-14 flare x 1-5/16-12 inch O-ring boss, male, Includes: Ref. 3 | | | 3 | 237-6016 | O-RING,0.116" Thk x 1.171" ID, -916, Cl 6, 90 Duro | - 1-11/64 ID x 7/64 inch wide, adapter | | | 4 | R27628 | HOSE | - 17 inch (432 mm) long, at control valve, if used | | | 4a | R28970 | HOSE,12.70 mm ID x 1473.00 mm, SAE 100R2 | - At control valve, if used 12.70 mm ID x 1473.00 mm, SAE 100R2 | | | 5 | R27629 | TUBE,0.625" OD | - upper, A port, if used | | | 6 | R27629 | TUBE,0.625" OD | - lower, B port (replaces R27633 tube), if used | | | 7 | 413-632 | BOLT,Hex, 3/8" - 16 x 2", Gr 5 | - hex, 3/8 NC x 2 inch | | | 8 | D40236 | CLAMP | - tube | | | 9 | D146035 | SPACER,10.31mm ID x 16mm OD x 15.5mm L | - clamp, split | | | 10 | D40083 | BLOCK | - clamp, mounting | | | 11 | 492-11038 | LOCK WASHER,3/8" | | | | 12 | 425-106 | NUT,3/8"-16, Cl 5 | | | | 13 | R35545 | BRACKET | - tube mounting | | | 14 | 413-616 | BOLT,Hex, 3/8" - 16 x 1", Gr 5 | - hex, 3/8 NC x 1 inch | | | 15 | 492-11038 | LOCK WASHER,3/8" | | | | 16 | 495-11041 | WASHER,0.406" ID x 0.812" OD x 0.065" W | (Flat, 13/32 x 13/16 x 1/16") 3/8", SAE | | | 17 | 218-1251 | BHD LOCK NUT,Blkhd, 7/8"-14 | NUT, LOCK, Blkhd, 7/8"-14 | | | 18 | R35549 | TUBE,0.625" OD x 6.2, 3.75" L | - with tee, upper, A port | | | 19 | R46492 | TUBE,0.625" OD x 4, 2.1" L | - with tee, lower, B port | | | 20 | 413-632 | BOLT,Hex, 3/8" - 16 x 2", Gr 5 | - hex, 3/8 NC x 2 inch | | | 21 | D40236 | CLAMP | - tubes to bracket, used with D76209 spacer, if used | | | 21a | D120613 | CLAMP,20mm ID | -tubes, spacer type, to bracket, if used | | | 22 | D146035 | SPACER,10.31mm ID x 16mm OD x 15.5mm L | - clamp, split, tubes at bracket, used with D40236 clamp (item 21), if used | | | 23 | 492-11038 | LOCK WASHER,3/8" | | | | 24 | 425-106 | NUT,3/8"-16, Cl 5 | | | | 25 | F93300 | HOSE | - 29 inch (737 mm), Serial Range: long,-cylinder | | | 26 | R46493 | SPACER,0.406" ID x 0.625" OD x 0.850" Thk | - split | | | 27 | 218-5062 | HYD CONNECTOR,7/8"-14, 37 Degree x 7/8"-14, O-Ring | ADAPTER - straight, 7/8-14 inch flare x O-ring boss, male, Includes: Ref. 28 | | | 28 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | 10-1, 90 Duro, .755" ID x .097" Thk, Adapter | | | 29 | R29282 | TUBE,0.625" OD | - to closed end of cylinder, right-hand | | | 30 | R29283 | TUBE,0.625" OD | - to closed end of cylinder, left-hand | | | 31 | 218-5107 | 90 ELBOW,90 Degree Elbow, 7/8" - 14 Male JIC x 7/8" - 14 Male ORB | - 90 degree, 7/8-14 inch flare x adj O-ring boss, male, adjustable, Incl. Ref. 32 | | | 32 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | 10-1, 90 Duro, .755" ID x .097" Thk, Elbow | | | 33 | G101272 | CYLINDER ASSY.,Double Acting, 50.8mm Rod, 254mm Stroke | CYLINDER ASSEMBLY - right-hand ripper, 4 (102) ID x 10 inch (245 mm) stroke, parts list Figure 8-78 | | | 34 | G101273 | CYLINDER ASSY.,Double Acting, 50.8mm Rod, 254mm Stroke | CYLINDER ASSEMBLY - left-hand ripper, 4 (102) ID x 10 inch (245 mm) stroke, parts list Figure 8-78 | | | 35 | 495-11094 | WASHER,7/8", SAE | - flat, 15/16 x 1-3/4 x 1/8 inch, if used | | | 36 | L18337 | CABLE TIE,9.95"-12.1" lg | STRAP - tie, if used | | | 37 | 218-5381 | ELBOW,90 Degree, 3/4"-16, 37 Degree x 7/8"-14, 37 Degree Fem Sw | - 90 degree, 3/4-16 flare x 7/8-14 female swivel, if used | |
|
|