| № | Номер | Название | Опции | Альт |
|---|
| L73283 | KIT | ALCOHOL EVAPORATOR ASSEMBLY - air compressor, Includes: Ref. 1 - 37 | | | L46372 | KIT | - alcohol evaporator, Includes: Ref. 1 - 16 | | | | The L46372 alcohol evaporator kit used only on the two-cylinder Midland Ross compressor. No alcohol evaporator released for the one-cylinder Bendix compressor. | | | | 1 | L31457 | GASKET | - adapter | | | 2 | L32930 | ADAPTER | - compressor | | | L33157 | VALVE | ASSEMBLY - check, at evaporator | | | 3 | L33162 | NUT | - cap | | | 4 | L33161 | O-RING,0.299" ID x 0.072" Width | GROMMET - valve | | | 5 | L33160 | VALVE | CHECK VALVE - evaporator | | | 6 | L33159 | SPRING | - valve | | | 7 | NSS | NOT SOLD SEPARAT | HOUSING - valve | | | L33145 | EVAPORATOR | ALCOHOL EVAPORATOR - body and jar assembly | | | 8 | L33151 | PLUG | - filter | | | 9 | 41-102 | PLUG,Exp, 1/2" | - expansion, steel, 1/2" diameter | | | 10 | L33146 | BODY | - alcohol evaporator | | | 11 | L33153 | SEALING RING | -, Serial Range: housing-jar | | | 12 | L33156 | RING | - sealing, evaporator tube | | | 13 | L33152 | TUBE,0.25" ID x 0.33" OD x 4.87" L | - evaporator | | | 14 | L33154 | RESERVOIR | JAR - alcohol evaporator, plastic | | | 15 | L33150 | FILTER | - air intake | | | 16 | A58439 | RETAINER | RING - retaining, filter | | | 222-5002 | HYD CONNECTOR,1/2"-20 x 1/8" NPT, Hi-seal | FITTING ASSEMBLY - flex tube, Includes: Ref. 17 & 18 | | | 17 | NSS | NOT SOLD SEPARAT | BODY - fitting | | | 18 | 222-5047 | SLEEVE,1/4" Tube | - fitting | | | 19 | 222-5060 | NUT,1/2"-20 | NUT - fitting | | | 20 | L46110 | TUBE,17" L | - 1/4" (6 mm) OD, cut to length | | | 222-5023 | ELBOW,90º, 1/2"-20 x 1/8" NPT, Hi-seal | FITTING ASSEMBLY - flex tube, 90 degree, Includes: Ref. 21 - 23 | | | 21 | 222-5060 | NUT,1/2"-20 | NUT - fitting | | | 22 | 222-5047 | SLEEVE,1/4" Tube | - fitting | | | 23 | NSS | NOT SOLD SEPARAT | BODY - fitting | | | 24 | L48192 | TUBE,0.25" OD | - check valve to governor | | | 25 | 13-524 | BOLT,Hex, 5/16" - 18 x 1-1/2", Gr 5 | - hex head, 5/16"- 18 NC x 1-1/2" | | | 25a | 192-110 | LOCK WASHER,5/16" | WASHER - lock, 5/16" | | | 26 | 13-414 | BOLT,Hex, 1/4" - 20 x 7/8", Gr 5, Full Thd | | | | 27 | 92-4 | LOCK WASHER,1/4" | WASHER, LOCK, 1/4" | | | 28 | 25-104 | NUT,1/4"-20, G5 | | | | 29 | L46593 | BRACKET | - evaporator mounting | | | 30 | 13-618 | BOLT,Hex, 3/8" - 16 x 1-1/8", Gr 5 | | | | 31 | 13-614 | BOLT,Hex, 3/8" - 16 x 7/8", Gr 5, Full Thd | | | | 32 | 221-401 | ELBOW,45 Degree, 1/8"-27, NPT | STREET ELBOW - 45 degree | | | 33 | 95-6 | WASHER,3/8" | - flat, 3/8" | | | 34 | 92-6 | LOCK WASHER,3/8" | | | | 35 | 25-106 | NUT,3/8"-16, G5 | - hex, 3/8" - 16 NC | | | 36 | L114542 | ELBOW | - 90 degree, special, used with Bendix manufactured water cooled compressor | | | 37 | L107160 | FITTING | ELBOW - 90 degree, special, used with Midland-Ross manufactured water cooled compressor | |
|
|