| № | Номер | Название | Опции | Альт |
|---|
| L127527 | CHASSIS | FRAME ASSEMBLY - front | | | 1 | NSS | NOT SOLD SEPARAT | FRAME ASSEMBLY - front | | | 2 | L55873 | BUSHING,63.75mm ID x 76.22mm OD x 50mm L | - lift frame | | | 3 | L61108 | BUSHING | - pivot, bucket cylinder | | | 5 | L55873 | BUSHING,63.75mm ID x 76.22mm OD x 50mm L | - pivot, lift cylinder | | | 7 | NSS | NOT SOLD SEPARAT | FLOOR - front frame | | | 8 | 413-616 | BOLT,Hex, 3/8" - 16 x 1", Gr 5 | - hex, 3/8 NC x 1 inch | | | 9 | 492-11038 | LOCK WASHER,3/8" | | | | 10 | 495-21044 | WASHER,3/8" | (flat, 7/16 x 1 x 5/64 inch) 3/8" | | | 11 | 219-36 | LUBE NIPPLE,45 Degree Elbow, 1/8" - 27 NPTF | FITTING - grease, 45 degree, 1/8 PT x 55/64 inch long | | | 12 | L127661 | DOOR | - hydraulic access | | | | Ref: #12 - This door used prior to SN JAK 0018741. | | | | | Per S9026-3 @ SN Jak0018741 and after there were changes to the front frame access cover hole that made this hole wider. This requires the use of a wider access door # L128850. | | | | | Old door L127661 is 571 mm x 413 mm & must be kept for service prior to SN Break | | | | | New door L128850 is 571 mm x 464 mm & is used on and after JAK0018741 31-May-96 | | | | 13 | L102515 | LATCH | HANDLE - door | | | 14 | 151-544 | RIVET,Pop, 3/16" x .515" | - pop, 3/16 x 1/2 inch | | | 15 | 413-616 | BOLT,Hex, 3/8" - 16 x 1", Gr 5 | - hex, 3/8 NC x 1 inch | | | 16 | 495-21044 | WASHER,3/8" | (flat, 7/16 x 1 x 5/64 inch) 3/8" | | | 17 | 492-11038 | LOCK WASHER,3/8" | | | | 18 | 425-106 | NUT,3/8"-16, Cl 5 | | | | 19 | L127644 | HINGE | - access door | | | 20 | L108504 | BUMPER | - rubber, frame | | | 21 | 495-21044 | WASHER,3/8" | (flat, 7/16 x 1 x 5/64 inch) 3/8" | | | 22 | 492-11038 | LOCK WASHER,3/8" | | | | 23 | 425-106 | NUT,3/8"-16, Cl 5 | | | | 24 | 413-828 | BOLT,Hex, 1/2" - 13 x 1-3/4", Gr 5 | | | | 25 | 80679 | LOCK WASHER,1/20.507 CST ZND | WASHER, LOCK, 1/2" | | | 26 | 425-108 | NUT,1/2" - 13, Gr 5 | NUT, , Hex 1/2"-13, G5 | | | 27 | L77602 | STEP | - operator access, front frame | | | 28 | L115247 | FENDER ASSY. | FENDER - front frame | | | 29 | L74731 | SUPPORT | -, Serial Range: fender-frame | | | 30 | L115279 | STEP | - front frame, right-hand, use existing hardware to mount to the hydraulic tank | | | 31 | L115280 | STEP | - front frame, left-hand, not shown, use existing hardware to mount to the hydraulic tank | | | 32 | 413-624 | BOLT,Hex, 3/8" - 16 x 1-1/2", Gr 5 | - hex, 3/8 NC x 1-1/2 inch | | | 33 | 413-620 | BOLT,Hex, 3/8" - 16 x 1-1/4", Gr 5 | - hex, 3/8 NC x 1-1/4 inch | | | 34 | 495-21044 | WASHER,3/8" | | | | 35 | 492-11038 | LOCK WASHER,3/8" | | | | 36 | 425-106 | NUT,3/8"-16, Cl 5 | | | | 37 | D55216 | PAD,2" x 9" | PAD - non skid | | | 38 | L76805 | STRIP | TAB - access door, if used, not shown | | | 39 | D93753 | PADLOCK | - includes keys, if used | | | 40 | D93751 | SET OF 2 KEYS | KEY - for Yale padlock only, if used | | | 41 | R29555 | KEY | - for Master padlock only, if used | | | 42 | 353-412 | PLUG,Dome, 1.093" hole, Nylon | - nylon, 1-3/32 inch | | | 43 | 353-422 | PLUG,Dome, 1.250" hole, Nylon | | | | | LIFT/TIE DOWN BRKTS AVAIL THRU WHOLEGOODS UNDER KIT L81107. KIT CONTAINS 4 BRKTS ALONG WITH DECALS AND INSTRUCTIONS. | | |
|
|