| № | Номер | Название | Опции | Альт |
|---|
| 1 | REF | INSTRUCTION | VALVE ASSEMBLY backhoe control, for correct assembly and components see Figure 8-080 or 8-082 | | | 2 | 413-624 | BOLT,Hex, 3/8" - 16 x 1-1/2", Gr 5 | hex, 3/8 NC x 1-1/2 inch | | | 3 | 492-11038 | LOCK WASHER,3/8" | | | | 4 | D52275 | WASHER,9.92mm ID x 31.75mm OD x 2.78mm Thk | flat, 25/64 x 1-1/4 x 7/64 inch, hardened | | | 5 | D52276 | ISOLATOR,10.16mm ID x 28.07mm OD x mm L | INSULATOR vibration | | | 6 | 495-81266 | WASHER,0.41" ID x 0.88" OD x 0.07" Thk | flat, 13/32 x 7/8 x 1/16 inch, if used | | | 7 | 413-828 | BOLT,Hex, 1/2" - 13 x 1-3/4", Gr 5 | | | | 8 | 80679 | LOCK WASHER,1/20.507 CST ZND | WASHER, LOCK, 1/2" | | | 9 | 425-108 | NUT,1/2" - 13, Gr 5 | NUT, , Hex 1/2"-13, G5 | | | 10 | 218-5063 | HYD CONNECTOR,7/8" - 14 Male JIC x 1-1/16" - 12 Male ORB | ADAPTER straight, 7/8-14 flare x 1-1/16-12 inch O-ring, boom section upper port, Includes: Ref. 11 | | | 11 | 237-6012 | O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro | 59/64 ID x 7/8 inch wide | | | 12 | 218-5149 | ELBOW,45 Degree Elbow, 7/8" - 14 Male JIC x 1-1/16" - 12 Male ORB | 45º, 7/8"-14 flare x 1-1/16"-12 adj. O-ring, boom section lower port, if used | | | 12a | 218-5119 | ELBOW,90 Degree Elbow, 7/8" - 14 Male JIC x 1-1/16" - 12 Male ORB | 90 degree, 7/-14 flare x 1-1/16-12 inch adj O-ring, boom section lower port, if used, Includes: Ref. 13 | | | 13 | 237-6012 | O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro | 59/64 ID x 7/8 inch wide, 218-5149 or 218-5119 elbow | | | 13a | D77182 | FITTING | RESTRICTOR boom section lower port | | | 14 | D143313 | HOSE,15.88mm ID x 1275mm L | 1275 mm long, without hose sleeves, boom cylinder rod end to boom section lower port | | | 15 | D143312 | HOSE,15.88mm ID x 1475mm L | 1475 mm long, without hose sleeves, boom cylinder closed end to boom section upper port | | | 16 | D145309 | CLAMP | hose, rubber | | | 16a | D145139 | CLAMP | center, hose, rubber | | | 16b | D144881 | CLAMP | hose, rubber | | | 17 | D145208 | BRACKET | right-hand side, support, rear hose clamps | | | 18 | D145209 | BRACKET | left-hand side, support, rear hose clamps | | | 19 | 413-644 | BOLT,Hex, 3/8" - 16 x 2-3/4", Gr 5 | - hex, 3/8 NC x 2-3/4 inch | | | 20 | 413-828 | BOLT,Hex, 1/2" - 13 x 1-3/4", Gr 5 | | | | 21 | 495-11053 | WASHER,1/2", SAE | (17/32" x 1-1/16" x 3/32") 1/2", SAE | | | 22 | 80679 | LOCK WASHER,1/20.507 CST ZND | WASHER, LOCK, 1/2" | | | 23 | 425-108 | NUT,1/2" - 13, Gr 5 | NUT, , Hex 1/2"-13, G5 | | | 23a | 231-1446 | NUT,3/8" - 16, Gr 5 | NUT hex, self-locking, 3/8 inch NC | | | 24 | D134728 | TUBE | SLEEVE hose guard | | | 25 | L18337 | CABLE TIE,9.95"-12.1" lg | STRAP tie, 15 inch, nylon | | | 26 | D139401 | TUBE | boom cylinder closed end | | | | See Figure 8-058, Ref. 12, 15, and 22, for tubes used on models with hydraulic boom lock. | | | | 27 | 218-5108 | ELBOW,90 Degree Elbow, 1-1/16" - 12 Male JIC x 1-1/16" - 12 Male ORB | 90º, 1-1/16-12 inch flare x adj O-ring boss, Incl. Ref. 28 | | | 28 | 237-6012 | O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro | 59/64 ID x 7/8 inch wide | | | 29 | REF | INSTRUCTION | CYLINDER ASSEMBLY boom, for correct assembly and components, see Figure 8-128 - 8-131C | | | 30 | 214-14100 | HOSE CLAMP,#100, 5.88" - 6.75", Type F Worm | CLAMP adj, 5-7/8 - 6-3/4 inch dia, tube to cylinder | | | 31 | D140105 | BRACKET | hose guide | | | 32 | D143425 | BAR | PLATE bracket retainer | | | 33 | 413-632 | BOLT,Hex, 3/8" - 16 x 2", Gr 5 | - hex, 3/8 NC x 2 inch | | | 34 | 492-11038 | LOCK WASHER,3/8" | | | | 35 | D141614 | TUBE | at boom cylinder rod end | | | | See Figure 8-058, Ref. 12, 15, and 22, for tubes used on models with hydraulic boom lock. | | | | 36 | 413-672 | BOLT,Hex, 3/8" - 16 x 4-1/2", Gr 5 | hex, 3/8 NC x 4-1/2 inch | | | 37 | 131-203 | LOCK NUT,3/8"-16, GB, LH | NUT light hex, self-locking, 3/8 inch NC, models with backhoe boom lock | |
|
|