| № | Номер | Название | Опции | Альт |
|---|
| 1 | D50665 | FRAME | - backhoe mounting, early production, identified by Klik pin retained upper mounting pin, order D56289, Includes: Ref. 2 - 5 | | | 1 | D56289 | FRAME | - backhoe mounting, late production, identified by bolt retained upper mounting pin, Includes: Ref. 2 - 5 | | | 2 | D31142 | BUSHING,51.02mm ID x 63.5mm OD x 38.1mm L | - frame at swing tower | | | 3 | D46942 | BEARING,1.75" ID x 2.8125" OD x 1.526" | BUSHING - pivotal ball type, stabilizer anchor | | | 4 | F61018 | SNAP RING,M73, Int | Ring, Snap, , bushing 2.812", Int, #281 | | | 5 | D43940 | BUSHING,44.68mm ID x 57.15mm OD x 25.4mm L | - standard, stabilizer anchor | | | 6 | D50292 | SUPPORT ASSY. | LEG - stabilizer, RH, Includes: Ref. 8, 9 and 10 | | | 7 | D50293 | SUPPORT ASSY. | LEG - stabilizer, LH, Includes: Ref. 8, 9 and 10, not shown | | | 8 | D37495 | BUSHING,44.76mm ID x 57.15mm OD x 31.75mm L | - leg to frame, 1-1/4" (31 mm) long | | | 9 | D54013 | SPACER,50.7mm ID x 53.98mm OD x 140.72mm L | SPACER - bushing | | | 10 | D37443 | BUSHING,44.68mm ID x 57.15mm OD x 50.8mm L | - leg to frame, 2" ( 51 mm) long | | | 11 | D52039 | PIN | - stabilizer leg to frame, is a 1-3/4" | | | 12 | D57735 | PIN | - special, pin retaining | | | 13 | 136-160 | COTTER PIN,Int, 13/64" x .156" | PIN - cotter, hair pin type | | | 14 | D50694 | PIN | - stabilizer cylinder to frame, when stock is exhausted, order 1-D29483 pin and 2-D25279 retaining rings | | | 14a | D29483 | PIN,38.1mm OD x 146.05mm L | - stabilizer, Serial Range: cylinder-frame | | | 14b | D25279 | SNAP RING,M35, Int | RING - pin retaining | | | 14c | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | GREASE FITTING - straight, 1/8" NPT | | | 15 | D50337 | BUSHING,38.91mm ID x 44.45mm OD x 14.22mm L | SPACER - cylinder mounting | | | 16 | D25279 | SNAP RING,M35, Int | RING - retaining, pin | | | 17 | REF | INSTRUCTION | CYLINDER - hydraulic, LH stabilizer, not shown, see Figures 252 - 268 for proper cylinder, not shown | | | 18 | REF | INSTRUCTION | CYLINDER - hydraulic, RH stabilizer, see Figures 252 - 268 for proper cylinder | | | 19 | D25279 | SNAP RING,M35, Int | RING - retaining, pin | | | 20 | D50695 | PIN,38.1mm OD x 195.33mm L | - stabilizer, Serial Range: cylinder-leg | | | 21 | D25279 | SNAP RING,M35, Int | RING - retaining, pin | | | 22 | D50696 | PIN,38.1mm OD x 225.55mm L | - stabilizer, Serial Range: foot-leg | | | 23 | D50141 | FOOT | - stabilizer, cleated, when stock is exhausted, use D55473 | | | 23 | D55473 | PAD | FOOT - stabilizer, cleated, when stock is exhausted, oredr D64621 foot for service | | | 23 | D64621 | FOOT REST | FOOT - stabilizer, cleated | | | 24 | D50143 | | FOOT - stabilizer, street or cemetary pad, optional, when stock is exhausted, use D55478 | | | 24 | D55478 | FOOT | - stabilizer, street or cemetary pad, optional, uses D40469 pad | | | 24a | 61376 | FOOT - stabilizer, street or cemetary pad, optional, uses D61368 pad | | | | 25 | R31222 | SHOE | PAD - rubber, optional | | | 26 | D29712 | SPECIAL NUT | - hex, special | | | 26a | D61368 | PAD | Rubber, D61376 stabilizer foot, optional | | | 26b | 13-1228 | BOLT,Hex, 3/4" - 10 x 1-3/4", Gr 5 | | | | 26c | 25-1012 | NUT,3/4"-10, G5 | | | | 27 | D54022 | DOOR | COVER - access | | | 28 | 13-616 | BOLT,Hex, 3/8" - 16 x 1", Gr 5, Full Thd | | | | 29 | 92-6 | LOCK WASHER,3/8" | | | | 30 | 219-39 | FITTING | GREASE FITTING - 45 degree, 1/8" NPT, upper pins | | | 30 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | GREASE FITTING - straight, 1/8" NPT, lower pins | | | 31 | 13-828 | BOLT,Hex, 1/2" - 13 x 1-3/4", Gr 5 | - hex, 1/2" - 13 NC x 1-3/4" | | | 32 | 92-8 | LOCK WASHER,1/2" | | | | 33 | D53647 | PIVOT | PIN - swing, Serial Range: cylinder-frame | | | 34 | REF | INSTRUCTION | CYLINDER - hydraulic, swing, parts list Figures 272 - 288 | | | 35 | D49863 | PIN,44.45mm OD x 248.92mm L | - swing, Serial Range: cylinder-tower | | | 36 | D49864 | PLATE | - pin retaining | | | 37 | 13-820 | BOLT,Hex, 1/2" - 13 x 1-1/4", Gr 5, Full Thd | | | | 38 | 92-8 | LOCK WASHER,1/2" | | | | 39 | D50134 | LATHE | TOWER - swing, Includes: Ref. 40 | | | 40 | D49429 | BUSHING | - at boom cylinder, closed end | | | 41 | D49879 | PIN | - swing locking | | | 42 | D33805 | PIN | - Klik | | | 43 | D74004 | PIN | - tower to frame, upper | | | 44 | D74004 | PIN | - tower to frame, lower | | | 45 | D26919 | SNAP RING,#200, Ext | Ring, Snap, #200, Ext | | | 46 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | GREASE FITTING - straight, 1/8" NPT | | | 47 | D33805 | PIN | - Klik, used with D50665 frame | | | 48 | D49812 | PIN,38.1mm OD x 137.16mm L | - tractor to backhoe mounting frame, used with D50665 frame | | | 49 | D50132 | SPACER,57.15mm ID x 114.3mm OD x 7.94mm L | - bearing | | | 50 | 13-856 | BOLT,Hex, 1/2" - 13 x 3-1/2", Gr 5 | Used with D56289 frame Hex, 1/2"-13 x 3 1/2", G5 | | | 51 | 131-654 | LOCK NUT,1/2"-13, GB | NUT - hex, lock, 1/2" -13 NC used with D56289 frame | | | 52 | D56335 | PIN | - tractor to backhoe mounting frame, used with D56289 frame | | | 53 | R10830 | WASHER | - spacer, upper and lower pivot pins,..062" thick | | | 54 | 195-2155 | WASHER,2 1/16" x 3" x .109" | - spacer, lower pivot pin,.015" thick | |
|
|