| № | Номер | Название | Опции | Альт |
|---|
| 1 | REF | INSTRUCTION | VALVE ASSEMBLY backhoe control, for correct assembly and components, see Figure 8-080 or 8-082 | | | 2 | 413-624 | BOLT,Hex, 3/8" - 16 x 1-1/2", Gr 5 | hex, 3/8 NC x 1-1/2 inch | | | 3 | 492-11038 | LOCK WASHER,3/8" | | | | 4 | D52275 | WASHER,9.92mm ID x 31.75mm OD x 2.78mm Thk | flat, 25/64 x 1-1/4 x 7/64 inch, hardened | | | 5 | D52276 | ISOLATOR,10.16mm ID x 28.07mm OD x mm L | INSULATOR rubber | | | 6 | 495-81266 | WASHER,0.41" ID x 0.88" OD x 0.07" Thk | flat, 13/32 x 7/8 x 1/16 inch, if used | | | 7 | 413-828 | BOLT,Hex, 1/2" - 13 x 1-3/4", Gr 5 | | | | 8 | 80679 | LOCK WASHER,1/20.507 CST ZND | WASHER, LOCK, 1/2" | | | 9 | 425-108 | NUT,1/2" - 13, Gr 5 | NUT, , Hex 1/2"-13, G5 | | | 10 | D146492 | HOSE,9.53mm ID x 1140mm L, SAE 100R2 | 1140 mm long, stabilizer sections upper ports to stabilizer cylinders, closed ends | | | 11 | 218-5106 | 90 ELBOW,90 Degree Elbow, 3/4" - 16 Male JIC x 3/4" - 16 Male ORB | 90 degree, 3/4-16 inch flare x adj O-ring boss, hose to stabilizer cylinders closed end, Includes: Ref. 12. | | | 12 | 237-6008 | O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro | 8-1, 90 Duro, .644" ID x .087" Thk | | | 13 | D150812 | HOSE,9.53mm ID x 1273mm L | 1273 mm long, stabilizer cylinders, rod end to stabilizer sections lower ports, replaces D147943 | | | 14 | 218-5059 | HYD CONNECTOR,3/4"-16, 37 Degree x 3/4"-16, O-Ring | ADAPTER straight, 3/4-16 inch flare x O-ring boss, stabilizer cylinder rod ends, Incl. Ref 15 | | | 15 | 237-6008 | O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro | 8-1, 90 Duro, .644" ID x .087" Thk | | | 16 | 218-5106 | 90 ELBOW,90 Degree Elbow, 3/4" - 16 Male JIC x 3/4" - 16 Male ORB | 90 degree, 3/4-16 inch flare x adj O-ring boss, stabilizer sections upper and lower ports, lncludes: Ref. 17 | | | 17 | 237-6008 | O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro | 8-1, 90 Duro, .644" ID x .087" Thk | | | 18 | D142787 | SPACER | INSULATOR rubber | | | 19 | 214-3188 | HOSE CLAMP,4-3/4" - 5-5/8", HD Worm | CLAMP, HOSE, , Adj. 4.75/5.625 HD Worm | | | 20 | REF | INSTRUCTION | CYLINDER ASSEMBLY right-hand stabilizer, for correct assembly and components, see Figure 8-122 or 8-123A | | | 21 | REF | INSTRUCTION | CYLINDER ASSEMBLY left-hand stabilizer, for correct assembly and components, see Figure 8-122 or 8-123A | | | 22 | 413-640 | BOLT,Hex, 3/8" - 16 x 2-1/2", Gr 5 | hex, 3/8 NC x 2-1/2 inch | | | 23 | D150099 | SHIN | PLATE spacer, hose | | | 24 | D146035 | SPACER,10.31mm ID x 16mm OD x 15.5mm L | hose clamp | | | 25 | D143846 | CLAMP | - Plastic, 5/8 inch hose | | | 26 | 495-21044 | WASHER,3/8" | (flat, 7/16 x 1 x 5/64 inch) 3/8" | | | 27 | 492-11038 | LOCK WASHER,3/8" | | | | 28 | 425-106 | NUT,3/8"-16, Cl 5 | | |
|
|