| № | Номер | Название | Опции | Альт |
|---|
| 1 | 1346393C1 | VALVE | ASSEMBLY loader control, three-spool, parts list Figure 8-066, for mounting see Figure 9-002 | | | 2 | D23143 | FITTING | ELBOW, 90 degree, special, lower port of valve, Includes: Ref. 3 | | | 3 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | 10-1, 90 Duro, .755" ID x .097" Thk | | | 4 | 218-5107 | 90 ELBOW,90 Degree Elbow, 7/8" - 14 Male JIC x 7/8" - 14 Male ORB | 90 degree, 7/8-14 inch flare x adj O-ring boss, upper port of valve, Incl. Ref. 5 | | | 5 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | 10-1, 90 Duro, .755" ID x .097" Thk | | | 6 | D145916 | TUBE | at upper port auxiliary section of loader control valve | | | 7 | D145912 | TUBE | at lower port auxiliary section of loader control valve | | | 8 | R46227 | STUD | special, tube clamp to chassis bracket | | | 9 | 84899 | SQUARE NUT,Sq, 3/8"-16, G2 | square, 3/8 inch NC | | | 10 | D143846 | CLAMP | - Tubes to right-hand side of chassis | | | 11 | D146035 | SPACER,10.31mm ID x 16mm OD x 15.5mm L | tube clamp | | | 12 | 495-21044 | WASHER,3/8" | (flat, 7/16 x 1 x 5/64 inch) 3/8" | | | 13 | 492-11038 | LOCK WASHER,3/8" | | | | 14 | 425-106 | NUT,3/8"-16, Cl 5 | | | | 15 | 218-736 | UNION,7/8"-14, 37 Degree x 7/8"-14, 37 Degree | CONNECTOR straight, 7/8-14 inch flare | | | 16 | D145914 | TUBE | upper port loader valve tube to lift frame tube, prior to P.I.N. JJG0169931 | | | 16a | D151097 | TUBE ASSY. | TUBE, upper port loader valve tube to lift frame tube, P.I.N. JJG0169931 and after, not shown, production only, for service order (1) each of Ref. 35, D151021 tube, Ref. 36, D151027 tube and Ref. 38, 218-736 connector on Figure 8-020 | | | 17 | D145910 | TUBE | lower port loader valve tube to lift frame tube, prior to P.I.N. JJG0169931 | | | 17a | D151099 | TUBE ASSY. | TUBE, lower port loader valve tube to lift frame tube, P.I.N. JJG0169931 and after, not shown, production only, for service order (1) each of Ref. 35, D151021 tube, Ref. 37, D151029 tube and Ref.38, 218-736 connector on Figure 8-020 | | | | TUBE THAT GOES IN TOP PORT OF LDR CONTROL VALVE, NEAR WHERE REF 1 IS POINTING, IS D147586. SHOWN WITH STEERING HYDRAULICS ON FIGURE 5-04. | | | | 18 | D138055 | CLAMP | tubes to left-hand side of chassis | | | 19 | 413-632 | BOLT,Hex, 3/8" - 16 x 2", Gr 5 | - hex, 3/8 NC x 2 inch | | | 20 | D146035 | SPACER,10.31mm ID x 16mm OD x 15.5mm L | tube clamps | | | 21 | 231-1446 | NUT,3/8" - 16, Gr 5 | NUT hex, self-locking, 3/8 inch NC, grade 8 | | | 22 | D125995 | HOSE,12.7mm ID x 750mm L | 750 mm long, at loader arm pivot | | | 23 | D146246 | PIPE | TUBE upper, on loader lift frame, no longer available, order D150691 and D150693 tubes, Ref.31 and 32 | | | 24 | D146248 | PIPE | TUBE lower, on loader lift frame, no longer available, order D150691 and D150693 tubes, Ref.31 and 32 | | | 25 | D143427 | CLAMP | tube, on loader lift frame | | | 26 | 413-616 | BOLT,Hex, 3/8" - 16 x 1", Gr 5 | hex, 3/8 NC x 1 inch | | | 27 | 492-11038 | LOCK WASHER,3/8" | | | | 28 | D143417 | SPACER,10.31mm ID x 15.88mm OD x 6.4mm L | 10 mm ID x 16 mm OD x 6 mm long, replaces D123539 | | | 29 | 84899 | SQUARE NUT,Sq, 3/8"-16, G2 | square, 3/8 inch NC | | | 30 | 218-776 | PLUG,7/8"-14, 37 Degree | hex, 7/8-14 inch flare, not used on models with clam bucket, if used | | | 31 | D150691 | TUBE ASSY. | TUBE upper, on loader lift frame | | | 32 | D150693 | PIPE | TUBE lower, on loader lift frame | | | 33 | 413-628 | BOLT,Hex, 3/8" - 16 x 1-3/4", Gr 5 | | | | 34 | 413-640 | BOLT,Hex, 3/8" - 16 x 2-1/2", Gr 5 | hex, 3/8 NC x 2-1/2 inch | | | 35 | D151021 | TUBE | straight, used with Ref. 36 or 37, and 38 | | | 36 | D151027 | TUBE ASSY. | TUBE clam section, port A, used with Ref. 35 and 38 | | | 37 | D151029 | TUBE ASSY. | TUBE clam section, port B, used with Ref. 35 and 38 | | | 38 | 218-736 | UNION,7/8"-14, 37 Degree x 7/8"-14, 37 Degree | CONNECTOR straight, 7/8-14 inch flare, used with Ref. 35, and Ref. 36 or 37 | |
|
|