| № | Номер | Название | Опции | Альт |
|---|
| | Compressor To Evaporator Core | | | | 1 | 1975773C2 | HOSE ASSY. | 1840 mm (72-7/16 in) Attaches To Cab Roof Condenser Tube And To Hose On Chassis, Incl. 2 | | | 2 | 128484A1 | O-RING,0.07" Thk x 0.426" ID, -13, Cl 5, 70 Duro | 7/16 ID x 1/16 | | | 3 | 135521A1 | HOSE | 1815 mm (71-1/2 in), Suction, Evaporator Core Expansion Valve Upper Port To Hose On Chassis, Incl. 4 - 5 | | | 4 | 128485A1 | O-RING,1.78mm Thk x 14mm ID, 70 Duro | 9/16 ID x 1/16 | | | 5 | 1250594C1 | CORE | | | | 6 | 122579A1 | SWITCH, A/C LOW PRES | Low | | | 7 | 1999419C3 | TUBE | Attaches To Receiver-Drier Tube, Incl. 8 | | | 8 | 128483A1 | O-RING,1.78mm Thk x 7.65mm ID, 70 Duro | 5/16 ID x 1/16 | | | 9 | 1340490C4 | EVAPORATOR | Evaporator, Includes 10 - 12 | | | 10 | 1990756C2 | VALVE | | | | 11 | 128485A1 | O-RING,1.78mm Thk x 14mm ID, 70 Duro | 9/16 ID x 1/16 | | | 12 | 128484A1 | O-RING,0.07" Thk x 0.426" ID, -13, Cl 5, 70 Duro | 7/16 ID x 1/16 | | | 13 | 83822C1 | TAPE | 610 mm (24 in), Cut From 1954475C1 | | | 14 | 394101A1 | HOSE ASSY. | Discharge, 3330 mm (131-1/8 in) Length, 35 Degree Bend at Compressor End, Compressor To Cab, Includes 15 - 18; Replaces 135519A1, 15 Degree Bend at Compressor End, Used On Some Models. | | | 15 | 128485A1 | O-RING,1.78mm Thk x 14mm ID, 70 Duro | 9/16 ID x 1/16 | | | 16 | 1250594C1 | CORE | | | | 17 | 122554A1 | CAP | | | | 18 | 128484A1 | O-RING,0.07" Thk x 0.426" ID, -13, Cl 5, 70 Duro | 7/16 ID x 1/16 | | | 19 | 135520A1 | HOSE ASSY. | 3267 mm (128-5/8 in), Suction, Compressor To Cab, Includes 20 - 22 | | | 20 | 128485A1 | O-RING,1.78mm Thk x 14mm ID, 70 Duro | 9/16 ID x 1/16 | | | 21 | 1250594C1 | CORE | | | | 22 | 122553A1 | CAP | | | | 23 | 232948A1 | SWITCH, A/C HIGH PRE | | | | 24 | R58601 | HARNESS | High Pressure Switch and Compressor To Main Cab Harness | | | 25 | L18337 | CABLE TIE,9.95"-12.1" lg | CABLE STRAP 15 in | | | 26 | 51200320 | CLAMP | | | | 27 | D43364 | CLAMP | | | | 28 | 814-12050 | BOLT,Hex, M12 x 1.75 x 50mm, Cl 8.8 | | | | 29 | 495-11053 | WASHER,1/2", SAE | (17/32" x 1-1/16" x 3/32") | | | 30 | R21385 | CLAMP | | | | 31 | R24840 | CLAMP,1.12", Coat, 0.41" Bolt Hole, P Type | | | | 32 | R52541 | SUPPORT | Clamp Mounting | | | 33 | 160-103 | BOLT,Hex, 3/8" - 16 x 1 1/4", Gr 8, Full Thd | | | | 34 | 892-11010 | LOCK WASHER,M10 | | | | 35 | 425-106 | NUT,3/8"-16, Cl 5 | | |
|
|