| № | Номер | Название | Опции | Альт |
|---|
| 1 | REF | INSTRUCTION | VALVE ASSEMBLY loader control, for correct assembly and components, see Figure 8-064 or 8-066, for mounting see Figure 9-002 | | | 2 | 218-5241 | TEE,7/8" - 14 Male JIC x 7/8" - 14 Male JIC x 7/8" - 14 Male ORB | 7/8-14 inch flare branch x flare x adj O-ring boss, Includes: Ref. 3 | | | 3 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | 10-1, 90 Duro, .755" ID x .097" Thk | | | 4 | 218-5232 | ELBOW,90 Degree, 7/8"-14, 37 Degree x 7/8"-14, 37 Degree Fem Sw | 90 degree, 7/8-14 inch flare x swivel flare | | | 5 | D150669 | HOSE | 813 mm long, to closed end of right-hand lift cylinder | | | | IF LOOKING FOR THE HOSE WITH A 90 DEGREE FITTING ON ONE END ORDER P/N 104262A1 PER TECH. | | | | 6 | D150668 | HOSE | 722 mm long, to rod end of right-hand lift cylinder | | | 7 | L18337 | CABLE TIE,9.95"-12.1" lg | STRAP tie, 15 inch, nylon | | | 8 | D149357 | TUBE | at tee, to closed end of left-hand lift cylinder | | | 9 | D149359 | TUBE | at tee, to rod end of left-hand lift cylinder | | | 10 | 218-736 | UNION,7/8"-14, 37 Degree x 7/8"-14, 37 Degree | CONNECTOR straight, 7/8-14 inch flare | | | 11 | D151095 | TUBE | to closed end of left-hand lift cylinder, production only, for service order one each of Ref. 32, D151021 tube, Ref. 33, D151023 tube and Ref. 35, 218-736 connector | | | 12 | D151093 | TUBE | to rod end of left-hand lift cylinder, production only for service order one each of Ref. 32, D151021 tube, Ref. 34, D151025 tube and Ref. 35, 218-736 connector | | | 13 | D138055 | CLAMP | tube | | | 14 | D146035 | SPACER,10.31mm ID x 16mm OD x 15.5mm L | tube clamp | | | 15 | R46227 | STUD | special, tube clamp to chassis bracket | | | 16 | 84899 | SQUARE NUT,Sq, 3/8"-16, G2 | square, 3/8 inch NC | | | 17 | 495-21044 | WASHER,3/8" | (flat, 7/16 x 1 x 5/64 inch) 3/8" | | | 18 | 492-11038 | LOCK WASHER,3/8" | | | | 19 | 425-106 | NUT,3/8"-16, Cl 5 | | | | 20 | 413-628 | BOLT,Hex, 3/8" - 16 x 1-3/4", Gr 5 | | | | 21 | 231-1446 | NUT,3/8" - 16, Gr 5 | NUT hex, self-locking, 3/8 inch NC, grade 8 | | | 22 | D150993 | TUBE | at rod end of right-hand lift cylinder | | | 23 | D150991 | TUBE | at rod end of left-hand lift cylinder | | | 24 | 218-5107 | 90 ELBOW,90 Degree Elbow, 7/8" - 14 Male JIC x 7/8" - 14 Male ORB | 90 degree, 7/8-14 inch flare x adj O-ring boss, Incl. Ref. 25 | | | 25 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | 10-1, 90 Duro, .755" ID x .097" Thk | | | 26 | D150667 | HOSE | 457 mm long, to rod end of left-hand lift cylinder | | | 27 | D150670 | HOSE | 762 mm long, to closed end of left-hand lift cylinder | | | 28 | REF | INSTRUCTION | CYLINDER ASSEMBLY lift, right-hand and left-hand, for correct assembly and components, see Figures 8-116 - 8-117C | | | 29 | D38648 | BLOCK | SPACER rubber, single tube | | | 30 | 214-1464 | HOSE CLAMP,#64, 3.56" - 4.5", Type F Worm | CLAMP, HOSE, , Adj. #64, 3.56/4.50 Type F Worm | | | 31 | 219-55 | LUBE NIPPLE,90 Degree Elbow, 1/8" - 27 NPTF | NIPPLE, LUBE, 90º, 1/8" NPT x .84" lg | | | 32 | D151021 | TUBE | straight, used with Ref. 33 or 34, and 35 | | | 33 | D151023 | TUBE | to closed end of left-hand lift cylinder, used with Ref. 32 and 35 | | | 34 | D151025 | TUBE | to rod end of left-hand lift cylinder, used with Ref. 32 and 35 | | | 35 | 218-736 | UNION,7/8"-14, 37 Degree x 7/8"-14, 37 Degree | CONNECTOR straight, 7/8-14 inch flare, used Ref. 32, and Ref. 33 or 34 | |
|
|