| № | Номер | Название | Опции | Альт |
|---|
| 1 | L127527 | CHASSIS | FRAME ASSEMBLY - front, see Figure 9-32 for component parts | | | 2 | 413-888 | BOLT,Hex, 1/2" - 13 x 5-1/2", Gr 5 | - hex, 1/2 NC x 5-1/2 inch | | | 3 | 131-70 | NUT,1/2"-13, GB | NUT - hex, self-locking, 1/2 inch NC | | | 4 | G101987 | CYLINDER | ASSEMBLY - lift, left-hand, see Figure 8-32 | | | 5 | G101986 | CYLINDER | ASSEMBLY - lift, right-hand, see Figure 8-32 | | | 6 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight, 1/8 PT x 21/32 inch long | | | 7 | L51558 | PIN,50.8mm OD x 121.92mm L | - mounting, lift cylinder to lift arm frame | | | 8 | 413-872 | BOLT,Hex, 1/2" - 13 x 4-1/2", Gr 5 | - hex, 1/2 NC x 4-1/2 inch | | | 9 | 131-70 | NUT,1/2"-13, GB | NUT - hex, self-locking, 1/2 inch NC | | | 10 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight, 1/8 PT x 21/32 inch long | | | 11 | L16015 | RING | - pin retaining, lift frame | | | 12 | L47700 | WASHER | - special, flat | | | 13 | 74298 | WASHER | SPACER - hardened, 2-1/2 ID x 3-9/16 OD x 1/8 inch thick | | | 14 | L112499 | SHAFT | - lift frame pivot | | | 15 | L115063 | WASHER | - special, retaining | | | 16 | L101691 | RING, SNAP | RING - snap, lift arm | | | 17 | G108393 | CYLINDER | ASSEMBLY - grapple bucket, left-hand, see page 8-37 | | | 18 | G108394 | CYLINDER | ASSEMBLY - grapple bucket, right-hand, see page 8-37 | | | 19 | 426-672 | BOLT,Hex, 3/8" - 16 x 4-1/2", Gr 8 | - hex, 3/8 NC x 4-1/2 inch, grade 8 | | | 20 | 131-652 | LOCK NUT,3/8"-16, GB | NUT - hex, self-locking, 3/8 inch NC | | | L117132 | ARM/LIFTING DEVICE | FRAME ASSEMBLY - loader lift | | | 21 | NSS | NOT SOLD SEPARAT | FRAME - lift | | | 22 | L50508 | BUSHING,63.75mm ID x 76.2mm OD x 40mm L | - 2-1/2 inch (63 mm) ID, lift arm pivot | | | 23 | L55747 | BUSHING | - 2-1/8 inch (53 mm) OD, lift cylinder to lift arm | | | 24 | L50509 | BUSHING,51.104mm ID x 63.5mm OD x 38.1mm L | - 2 inch (51 mm) ID, bucket bellcrank and bucket | | | 25 | L55302 | DIPPER | BELLCRANK - grapple bucket | | | 26 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight, 1/8 PT x 21/32 inch long | | | 27 | L107790 | PIN,38.1mm OD x 172.72mm L | - bellcrank to lift arm | | | 28 | 131-53 | NUT,1 1/2"-12 | NUT - hex, self-locking, 1-1/2 inch NF | | | 29 | 413-828 | BOLT,Hex, 1/2" - 13 x 1-3/4", Gr 5 | | | | 30 | 495-21056 | WASHER,1/2" | - flat, 9/16 x 1-3/8 x 3/32 inch | | | 31 | 131-70 | NUT,1/2"-13, GB | NUT - hex, self-locking, 1/2 inch NC | | | 32 | L105077 | LINK | - bucket | | | 33 | D31140 | BUSHING,38.33mm ID x 47.63mm OD x 25.4mm L | - used in right-hand and left-hand links | | | 34 | L47224 | WASHER | - special, hardened | | | 35 | L112502 | PIN,38.1mm OD x 159mm L | - bellcrank to grapple bucket link and grapple bucket cylinder | | | 36 | R17756 | ROD,12.7mm OD x 109.54mm L | PIN - bellcrank | | | 37 | 413-828 | BOLT,Hex, 1/2" - 13 x 1-3/4", Gr 5 | | |
|
|