| № | Номер | Название | Опции | Альт |
|---|
| 1 | 362851A1 | BRACKET | If Used | |
| 1a | 86993692 | MOUNTING PLATE | If Used | |
| 2 | 386988A3 | SOLENOID VALVE | Four-Way; Two Position; Incl. 396695A1, 396696A1 | |
| 396695A1 | KIT | Seal; Includes (10) O-Rings and (2) Cartridge Seal Kits Which Are Not Serviced Separately | |
| 396696A1 | KIT | Coil | |
| 3 | 239-5020 | O-RING,Rect, .875" ID x 1" OD, Cl 5 | Not Illustrated; When Backhoe Coupler Valve and Loader Coupler Valves Are Used Together, O-Rings Are To Be Placed Between The Valves At The Tank, Pressure and Load Sense Ports | |
| 4 | 711-10050 | CARRIAGE BOLT,Sq Nk, M10 x 1.5 x 50mm, Cl 8.8 | M10 x 50 | |
| 6 | 330083A1 | SPACER,11mm ID x 40mm OD x 10mm Thk | 11 x 40 x 10 mm thk | |
| 7 | 832-10410 | NUT,M10 x 1.5, Cl 8 | | |
| 8 | 811-10060 | CARRIAGE BOLT,Sht Sq Nk, M10 x 1.5 x 60mm, Cl 8.8 | Models with Backhoe Coupler Valve Only | |
| 8 | 811-10100 | CARRIAGE BOLT,Sht Sq Nk, M10 x 1.5 x 100mm, Cl 8.8 | M10 x 100; Models With Both Backhoe Bucket Coupler Valve and Loader Coupler Valve | |
| 10 | 832-10410 | NUT,M10 x 1.5, Cl 8 | | |
| 11 | 218-5057 | HYD CONNECTOR,9/16" - 18 JIC x 9/16" - 18 ORB | Incl. Ref 12 | |
| 12 | 237-6006 | O-RING,0.078" Thk x 0.468" ID, -906, Cl 6, 90 Duro | Boss seal | |
| 13 | 218-5105 | ELBOW,90 Degree Elbow, 9/16" - 18 Male JIC x 9/16" - 18 Male ORB | Incl. Ref 14 | |
| 14 | 237-6006 | O-RING,0.078" Thk x 0.468" ID, -906, Cl 6, 90 Duro | Boss seal | |
| 15 | 218-5351 | HYD CONNECTOR,3/4"-16, 37 Degree x 9/16"-18, O-Ring | 3/4 fl x 9/16 Or; Incl. Ref 16 | |
| 16 | 237-6006 | O-RING,0.078" Thk x 0.468" ID, -906, Cl 6, 90 Duro | Boss seal | |
| 17 | 218-5318 | HYD CONNECTOR,9/16"-18, 37 Degree x 1/2"-20, O-Ring | 9/16 fl x 1/2 Or; Incl. Ref 18 | |
| 18 | 237-6005 | O-RING,0.072" Thk x 0.414" ID, -905, Cl 6, 90 Duro | | |
| 19 | 218-5053 | HYD CONNECTOR,7/16" - 20 JIC x 7/16" - 20 ORB | Incl. Ref 20 | |
| 20 | 237-6004 | O-RING,0.072" Thk x 0.351" ID, -904, Cl 6, 90 Duro | Boss seal | |
| 21 | 405649A2 | HOSE ASSY. | 3650 mm (143-3/4 in); Solenoid Valve Lower Port To Coupler Cylinder; For Attaching Parts, See Figure 08-24; Replaces 405649A1 (3545 mm Hose) | |
| 22 | 405648A2 | HOSE ASSY. | 3545 mm (139-5/8 in); Solenoid Valve Upper Port To Coupler Cylinder; For Attaching Parts, See Figure 08-24; Replaces 405648A1 (3420 mm Hose) | |
| 23 | L18337 | CABLE TIE,9.95"-12.1" lg | CABLE STRAP 15 in | |
| 24 | 363220A2 | HOSE ASSY. | 1170 mm (46-1/16 in); Return | |
| 25 | 515-25190 | CLAMP,3/4", Insul, 1/2" Bolt | | |
| 26 | 515-25159 | CLAMP,5/8", Insul, 1/2" Bolt | | |
| 27 | 614-12025 | BOLT,Hex, M12 x 1.75 x 25mm, Cl 8.8, Full Thd | If used | |
| 27 | 614-12030 | BOLT,Hex, M12 x 1.75 x 30mm, Cl 8.8, Full Thd | If used | |
| 28 | 832-10412 | NUT,M12 x 1.75, Cl 8 | | |
| 29 | 218-5490 | TEE,37 Degree, 1 1/16"-12x1 1/16"-12, Fem Sw Runx7/8"-14 Br | | |
| 30 | 218-5220 | TEE,37 Degree, 7/8"-14 x 7/8"-14, Fem Sw Run | 7/8 fl br x fl x sw; Models With Ride Control | |
| 31 | 391459A1 | HOSE ASSY. | 580 mm (22-27/32 in); Pressure | |
| 32 | 218-5292 | TEE,37 Degree, 3/4"-16, 7/8"-14 O-Ring Run, 3/4"-16 | 1/2 x 5/8 x 1/2; Incl. Ref 33; Models Without Hand Held Auxiliary Hydraulics | |
| 33 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | | |
| 34 | 218-845 | TEE,37 Degree, 3/4"-16 x 3/4"-16, Fem Sw Run | Models With Hand Held Auxiliary Hydraulics; See Hand Held Auxiliary Hydraulics For Tee At Loader Valve | |
| 35 | 130060A2 | PILOT VALVE | EF 19,000 kPa; Pilot Relief; See Figure 08-29 | |
| 36 | 363222A2 | HOSE ASSY. | 645 mm (25-13/32 in); Load Sensing | |
| 37 | 282428A1 | VALVE PRESSURE RELIE | Incl. Ref 38 | |
| 38 | 237-6006 | O-RING,0.078" Thk x 0.468" ID, -906, Cl 6, 90 Duro | Boss seal | |
| 39 | 218-5222 | TEE,37 Degree, 9/16"-18, x 9/16"-18, Fem Sw Run | Models with Hand Held Auxiliary Hydraulics | |
| 40 | 386789A2 | SWITCH | Backhoe Bucket Hydraulic Coupler | |
| 5 | 895-11010 | WASHER,11mm ID x 20mm OD x 2mm Thk | 11 x 21 x 2 mm | |
| 9 | 895-11010 | WASHER,11mm ID x 20mm OD x 2mm Thk | 11 x 21 x 2 mm | |
