| № | Номер | Название | Опции | Альт |
|---|
| 1 | G101188 | JACK BODY | CYLINDER ASSEMBLY - tilt, 2-1/2" (64 mm) ID x 6-5/16" (160 mm) stroke, Includes: Ref. 2 - 20 | |
| 2 | G32313 | TUBE,14.43" L | ASSEMBLY - cylinder, Includes: Ref. 3 | |
| 3 | D34818 | BUSHING,25.63mm ID x 34.92mm OD x 19.05mm L | - tube | |
| G104915 | GLAND | ASSEMBLY - cylinder, Includes: Ref. 4 - 9 | |
| 4 | NSS | NOT SOLD SEPARAT | GLAND - cylinder | |
| 5 | G102569 | PLUG | - nylon, thread locking, gland, if used | |
| 6 | D95141 | WIPER SEAL | WIPER - piston rod | |
| | Part of seal kit P/N G109475 | | |
| 7 | D36968 | SEAL,31.72mm ID x 44.58mm OD x 10.69mm Thk | U-CUP SEAL - piston rod, wide | |
| | Part of seal kit P/N G109475 | | |
| 7 | G100775 | SEAL | U-CUP SEAL - piston rod, service option - severe heat or cold | |
| 7a | G109092 | SEAL,31.37mm ID x 44.63mm OD x 3.05mm Thk | - buffer, grooved, piston rod, narrow | |
| | Part of seal kit P/N G109475 | | |
| 8 | G32129 | BACK-UP RING,63.25mm ID x 69.35mm OD x 1.4mm Thk | BACKUP RING - gland O-ring | |
| | Part of seal kit P/N G109475 | | |
| 9 | A28318 | O-RING,0.139" Thk x 2.484" ID, -230, Cl 5, 75 Duro | - gland | |
| | Part of seal kit P/N G109475 | | |
| 10 | 187-1524 | SELF-TAP SCREW,Hex Hd, #8 x 3/8" | SCREW - hex head, slotted, self-tapping, No. 8 - 32 NC x 3/8", plated, if used | |
| 11 | G33352 | ROD | ASSEMBLY - piston, 1-1/4" (32 mm) diameter, Includes: Ref. 12 and 13 | |
| 12 | D22200 | BEARING,25.4mm ID x 36.5mm OD x 22.23mm L | BUSHING - piston rod, self-aligning | |
| 13 | D27833 | SNAP RING,1.625", Int, #162 | Ring, Snap, 1.625", Int, #162 | |
| 14 | G100708 | PISTON | - cylinder | |
| 15 | G102289 | SEAL,59.92mm ID x 64.64mm OD x 6.96mm Thk | - piston | |
| | Part of seal kit P/N G109475 | | |
| 16 | G100713 | SEALING RING,Square, 5.28mm Thk x 49.91mm ID | BACKUP RING - piston seal | |
| | Part of seal kit P/N G109475 | | |
| 17 | G100714 | RING | - wear, piston | |
| | Part of seal kit P/N G109475 | | |
| 18 | 28-1240 | BOLT,Hex, 3/4" - 16 x 2-1/2", Gr 8 | - hex head, 3/4" - 16 NF x 2-1/2", grade 8 | |
| 19 | G32317 | WASHER,33.34mm ID x 63.5mm OD x 2.38mm Thk | - hardened | |
| 20 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | GREASE FITTING - straight, 1/8" NPT | |
| G109475 | GASKET KIT | KIT - seal, Includes: Refs. 6, 7, 7A, 8, 9, 15, 16 and 17 | |
