| № | Номер | Название | Опции | Альт |
|---|
| R47436 | VALVE | CONTROL VALVE ASSEMBLY - four spool, loader models, with clam bucket and ripper, Includes: Ref. 1 - 12 | | | | The control valve assembly part number is stamped on the inlet-outlet section. | | | | 1 | N8942 | VALVE BLOCK | SECTION - inlet-outlet | | | 2 | N8191 | VALVE | MAIN RELIEF VALVE ASSEMBLY - parts list Fig. 8-70 | | | 3 | N8945 | VALVE | SECTION ASSEMBLY - bucket tilt, parts list Fig. 8-74 | | | 4 | N8944 | VALVE | SECTION ASSEMBLY - lift, parts list Fig. 8-76 | | | 5 | N8943 | VALVE | SECTION ASSEMBLY - clam bucket and ripper, parts list Fig. 8-78 | | | 6 | 364840R1 | O-RING,0.07" Thk x 0.801" ID, -19, Cl 5, 75 Duro | - between sections, 13/16" (21 mm) ID | | | 7 | 376769R1 | O-RING,0.07" Thk x 0.926" ID, -21, Cl 5, 75 Duro | - between sections, 15/16" (24 mm) ID | | | 8 | N8946 | COVER | ASSEMBLY - right-hand, Includes: Ref. 9 and 10 | | | 9 | 218-5213 | PLUG,Hex Soc, 1 3/16"-12 ORB | cover, Includes Ref 11 Hex Soc, 1 3/16"-12 ORB | | | 10 | 218-5009 | O-RING,0.116" Thk x 1.048" ID, -914, Cl 6, 90 Duro | - plug | | | 11 | 113-365 | BOLT,Hex, 3/8" - 16 x 9-3/4", Gr 5 | - tie, hex head, 3/8" - 16 NC x 9-3/4", plated, replaces tie bolt with fine threads used on some models | | | 12 | 129-103 | NUT,Hex, 3/8" - 16, Gr 5 | NUT, , Replaces nut with fine threads used on some models 3/8"-16, G5 | | | R47438 | VALVE | CONTROL VALVE ASSEMBLY - four spool, dozer models, angle tilt dozer with ripper, Includes: Ref. 13 - 24 | | | | The control valve assembly part number is stamped on the inlet-outlet section. | | | | 13 | N8942 | VALVE BLOCK | SECTION - inlet-outlet | | | 14 | N8191 | VALVE | MAIN RELIEF VALVE ASSEMBLY - used on all loader models and on dozer models without a backhoe, parts list Fig. 8-70 | | | 14 | R50181 | VALVE, PRESSURE RELI | MAIN RELIEF VALVE ASSEMBLY - used on dozer models with a backhoe only, not shown, parts list Fig. 8-72 | | | 15 | N8969 | VALVE BLOCK | SECTION ASSEMBLY - dozer angle and tilt, parts list Fig. 8-78 | | | 16 | N8970 | VALVE BLOCK | SECTION ASSEMBLY - dozer lift, parts list Fig. 8-76 | | | 17 | N8943 | VALVE | SECTION ASSEMBLY - ripper, parts list Fig. 8-78 | | | 18 | 364840R1 | O-RING,0.07" Thk x 0.801" ID, -19, Cl 5, 75 Duro | - between sections, 13/16" (21 mm) ID | | | 19 | 376769R1 | O-RING,0.07" Thk x 0.926" ID, -21, Cl 5, 75 Duro | - between sections, 15/16" (24 mm) ID | | | 20 | N8946 | COVER | ASSEMBLY - right-hand, Includes: Ref. 21 and 22 | | | 21 | 218-5213 | PLUG,Hex Soc, 1 3/16"-12 ORB | cover, Includes Ref 22 Hex Soc, 1 3/16"-12 ORB | | | 22 | 218-5009 | O-RING,0.116" Thk x 1.048" ID, -914, Cl 6, 90 Duro | - plug | | | 23 | 113-365 | BOLT,Hex, 3/8" - 16 x 9-3/4", Gr 5 | - tie, hex head, 3/8" - 16 NC threads x 9-3/4", plated, replaces tie bolt with fine threads used on some valves | | | 24 | 129-103 | NUT,Hex, 3/8" - 16, Gr 5 | NUT, , Replaces nut with fine threads used on some valves 3/8"-16, G5 | |
|
|