| № | Номер | Название | Опции | Альт |
|---|
| 1 | REF | INSTRUCTION | VALVE ASSEMBLY - control, backhoe, parts list Figure 8-40, for valve mounting plate see Figure 8-2 | | | 2 | 413-832 | BOLT,Hex, 1/2" - 13 x 2", Gr 5 | | | | 3 | 80679 | LOCK WASHER,1/20.507 CST ZND | WASHER, LOCK, 1/2" | | | 4 | 95-21056 | WASHER,1/2" | - flat, 9/16 x 1-3/8 x 1/8 inch | | | 5 | 425-108 | NUT,1/2" - 13, Gr 5 | NUT, , Hex 1/2"-13, G5 | | | 6 | 218-5064 | HYD CONNECTOR,1-1/16" - 12 Male JIC x 1-1/16" - 12 Male ORB | ADAPTER - straight, 1-1/16-12 inch flare x O-ring boss, Incl. Ref. 7 | | | 7 | 237-6012 | O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro | 12-1, 90 Duro, .924 ID x .116" Thk | | | 8 | D133951 | HOSE ASSY.,15.88mm ID x 2092mm L | HOSE - 81-7/8 inch (2079 mm) long, upper port, second position from top in Ref. 14 swing tower clamp | | | 9 | D133953 | HOSE ASSY.,15.88mm ID x 2068mm L | HOSE - 80-7/16 inch (2043 mm) long, lower port, bottom position in Ref. 14 swing tower clamp | | | 9a | D133294 | HOSE PROTECTION | SLEEVE - hose | | | 10 | D124502 | CLAMP | - hose, attaches to clamp welded in boom | | | 11 | D127521 | SPACER | - hose clamp | | | 12 | D134182 | STUD | - 1/2 inch - 13 NC x 3-1/2 inch | | | 12a | 495-11053 | WASHER,1/2", SAE | (17/32" x 1-1/16" x 5/64") 1/2", SAE | | | 13 | 80679 | LOCK WASHER,1/20.507 CST ZND | WASHER, LOCK, 1/2" | | | 13a | 425-108 | NUT,1/2" - 13, Gr 5 | NUT, , Hex 1/2"-13, G5 | | | 14 | D127510 | CLAMP | - hose, in swing tower | | | 15 | 113-319 | BOLT,Hex, 7/16" - 14 x 2-1/2", Gr 5 | | | | 16 | | RESERVED | | | | 17 | 131-667 | NUT,7/16"-14, GB | NUT - hex, self-locking, 7/16 inch NC, replaces lock washer and hex nut on some models | | | 18 | D77848 | TUBE | - right-hand, upper | | | 19 | D77846 | TUBE | - left-hand, upper | | | 20 | D40236 | CLAMP | - metal, Serial Range: tubes-boom | | | 21 | | RESERVED | | | | 22 | 495-21044 | WASHER,3/8" | (flat, 7/16 x 1 x 5/64 inch) 3/8" | | | 23 | D76195 | SPACER,10.31mm ID x 15.88mm OD x 17.78mm L | - tube clamp | | | 23a | D34089 | SPACER | - clamp | | | 24 | 413-624 | BOLT,Hex, 3/8" - 16 x 1-1/2", Gr 5 | - hex, 3/8 NC x 1-1/2 inch | | | 24a | 413-632 | BOLT,Hex, 3/8" - 16 x 2", Gr 5 | | | | 25 | 492-11038 | LOCK WASHER,3/8" | | | | 26 | 224-2206 | SQUARE NUT,Sq, 3/8"-16 | - square, 3/8 inch NC, welded to boom | | | 27 | D74182 | GROMMET,3/4" ID x 1.46" L | INSULATOR - tube clamp | | | 28 | D74192 | CLAMP | - tube | | | 29 | 413-616 | BOLT,Hex, 3/8" - 16 x 1", Gr 5 | - hex, 3/8 NC x 1 inch | | | 30 | 495-11041 | WASHER,0.406" ID x 0.812" OD x 0.065" W | (Flat, 13/32 x 13/16 x 1/16") 3/8", SAE | | | 31 | 131-52 | NUT,3/8"-16, GC | NUT - light hex, self-locking, 3/8 inch NC | | | 32 | D52566 | HOSE | - 70 inch (1778 mm) long, to bucket cylinder | | | 33 | 218-5123 | ELBOW,90 Degree Elbow, 1-1/16" - 12 Male JIC x 7/8" - 14 Male ORB | - 90 degree, 1-1/16-12 flare x 7/8-14 inch adj O-ring, at closed end port, Includes: Ref. 34 | | | 34 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | 10-1, 90 Duro, .755" ID x .097" Thk | | | 35 | D123159 | TUBE | - to rod end port | | | 36 | 218-737 | UNION,1 1/16"-12, 37 Degree x 1 1/16"-12, 37 Degree | CONNECTOR - straight, 1-1/16-12 inch flare, hose to tube | | | 37 | 218-5065 | HYD CONNECTOR,1-1/16" - 12 Male JIC x 7/8" - 14 Male ORB | ADAPTER - straight, 1-1/16-12 fl x 7/8-14 inch O-ring boss, Includes: Ref. 38 | | | 38 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | 10-1, 90 Duro, .755" ID x .097" Thk | | | 39 | D38648 | BLOCK | SPACER - tube, rubber | | | 40 | 214-269 | HOSE CLAMP,#72, 4.06" - 5", Type F Worm | CLAMP - adj, 4-1/16 - 5 inch dia, tube | | | 41 | REF | INSTRUCTION | CYLINDER ASSEMBLY - bucket, parts list Figure 8-76 | |
|
|