| № | Номер | Название | Опции | Альт |
|---|
| 1 | R56572 | PUMP, HYDRAULIC,80.48 CC | PUMP ASSEMBLY - equipment, 1 inch shaft, part number stamped on port end cover, if used, parts list Figure 8-12, used on dozer models prior to P.I.N. JAK0009017 and on all loader models | | | 1 | R56572R | REMAN-HYD PUMP | 1150E, 1155E, Both CASE CRAWLER TRACTOR, PUMP ASSEMBLY, used on dozer models prior to P.I.N. JAK0009017 and on all loader models | | | 1 | R56572C | CORE-HYDRAULIC PUMP | Return Number | | | 1a | R58775 | PUMP, HYDRAULIC | PUMP ASSEMBLY - equipment, 7/8 inch shaft, if used, parts list Figure 8-12, used on dozer models P.I.N. JAK0009017 and after | | | 1a | 87604362R | REMAN-HYD PUMP | 1150E, 1155E, Both used on dozer models P.I.N JAK0009017 and after, Reman for New PN R58775 | | | 1a | 87604362C | CORE-HYDRAULIC PUMP | Return Number | | | 2 | R46073 | STUD | - 1/2 NC x 2 inch, install short thread end into converter housing | | | 3 | 496-21053 | WASHER,17/32" x 1 1/16" x .134" | - flat, 17/32 x 1-1/16 x 1/8 inch, hardened | | | 4 | 231-4218 | LOCK NUT,1/2"-13, GB | NUT - hex, self-locking, 1/2 inch NC | | | 5 | 238-6225 | O-RING,0.139" Thk x 1.859" ID, -225, Cl 6, 90 Duro | | | | 6 | A14157 | FLANGE | CLAMP - split flange | | | 7 | 413-824 | BOLT,Hex, 1/2" - 13 x 1-1/2", Gr 5 | | | | 8 | 80679 | LOCK WASHER,1/20.507 CST ZND | WASHER, LOCK, 1/2" | | | 9 | R46557 | PIPE,1.998" ID x 2 - 2.38" OD | TUBE - at pump, dozer and drawbar models, dimension A is 13-1/2 inch long, if used | | | 10 | R43811 | TUBE,1.998" ID x 2 - 2.38" OD | - at pump, loader models, dimension A 14-1/2 inch long, if used | | | 11 | R43919 | HOSE | - 2 ID x 6 inch (152 mm) long, cut from R45493 hose, item 14 | | | 12 | 214-3240 | HOSE CLAMP,1-3/4" - 2-5/8", HD Worm, W/ Liner | CLAMP, HOSE, , Adj. 1.75/2.625 HD Worm, W/liner | | | 13 | R43814 | TUBE,2" OD | - at pump | | | 14 | R45493 | HOSE,50.80 mm ID x 203.20 mm | | | | 15 | R38740 | BRACKET | - tube | | | 16 | 413-612 | BOLT,Hex, 3/8" - 16 x 3/4", Gr 5 | | | | 17 | 92-11038 | LOCK WASHER,3/8" | WASHER, LOCK, 3/8" | | | 18 | R49433 | PIPE,2" OD | TUBE - from reservoir to pump | | | 19 | R30064 | CLAMP | - tube, at hydraulic reservoir | | | 20 | R30065 | GASKET | - tube | | | 21 | R30066 | RETAINER | - gasket | | | 22 | D32004 | GASKET | - pump | | | 23 | R46562 | PINION | GEAR - equipment pump drive R56572, for 1 inch shaft | | | 24 | R58784 | PINION | GEAR - equipment pump drive R58775, for 7/8 inch shaft | |
|
|