(8-044) - BASIC AUXILIARY HYDRAULICS, MODELS WITH OR WITHOUT EXTENDABLE DIPPER (COMMON PARTS)

№	Номер	Название	Опции
1	121740A2	VALVE, CONTROL	VALVE ASSEMBLY - auxiliary, parts list Figure 8-134
2	136358A1	GUIDE	BRACKET - auxiliary valve mounting to chassis, no longer available, order 224788A1 bracket on Figure 8-054
3	814-12050	BOLT,Hex, M12 x 1.75 x 50mm, Cl 8.8
4	896-11012	WASHER,13.5mm ID x 24mm OD x 3mm Thk
5	814-10070	BOLT,Hex, M10 x 1.5 x 70mm, Cl 8.8	- hex, 10-1.5 x 70 mm
6	895-11010	WASHER,11mm ID x 20mm OD x 2mm Thk	- flat, 11 x 20 x 2 mm
7	829-1410	NUT,M10 x 1.5, Cl 10.9
8	218-5057	HYD CONNECTOR,9/16" - 18 JIC x 9/16" - 18 ORB	ADAPTER - straight, 9/16-18 inch flare x O-ring boss, Incl. Ref. 9
10	218-980	ELBOW,90 Degree, 9/16"-18, 37 Degree x 9/16"-18, 37 Degree Fem Sw	- 90 degree, 9/16-18 inch flare x swivel
11	175276A1	TUBE,9.53 mm OD	- auxiliary valve to solenoid valve inlet
12	218-5058	HYD CONNECTOR,9/16" - 18 Male JIC x 3/4" - 18 Male ORB	ADAPTER - straight, 9/16-18 flare x 3/4-16 inch O-ring boss, Includes: Ref. 13
13	237-6008	O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro	8-1, 90 Duro, .644" ID x .087" Thk
14	137012A1	SOLENOID VALVE	VALVE ASSEMBLY - solenoid, component parts are not serviced separately
15	137713A1	SUPPORT	BRACKET - solenoid mounting
16	136977A1	LARGE PLATE	PLATE - solenoid valve mounting
17	814-6060	BOLT,Hex, M6 x 1 x 60mm, Cl 8.8	- hex, 6 - 1.0 x 60 mm
18	895-11006	WASHER,6.6mm ID x 12mm OD x 1.6mm Thk
19	829-1406	NUT,Hex, M6 x 1, Cl 10.9
20	515-23127	CLAMP,1/2", Insul, 3/8" Bolt	P-type, Replaces 515-2379, 5/16" ID clamp 1/2", Insul, 3/8" Bolt
21	218-5128	ELBOW,90° Elbow, 9/16" - 18 Male JIC x 3/4" - 16 Male ORB	- 90 degree, 9/16-18 flare x 3/4-16 inch adj O-ring boss, Incl. Ref. 22
22	237-6008	O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro	8-1, 90 Duro, .644" ID x .087" Thk
23	183018A1	HOSE	- 347 mm (13-11/16 inch) long, solenoid valve outlet to four-way cross fitting
24	218-5062	HYD CONNECTOR,7/8"-14, 37 Degree x 7/8"-14, O-Ring	ADAPTER - straight, 7/8-14 inch flare x O-ring boss, backhoe section of auxiliary valve, Includes: Ref. 25
25	237-6010	O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro	10-1, 90 Duro, .755" ID x .097" Thk
26	218-5232	ELBOW,90 Degree, 7/8"-14, 37 Degree x 7/8"-14, 37 Degree Fem Sw	- 90 degree, 7/8-14 inch flare x swivel, backhoe section of auxiliary valve, see backhoe auxiliary hydraulics Figure 8-062 for attaching hoses
27	218-5107	90 ELBOW,90 Degree Elbow, 7/8" - 14 Male JIC x 7/8" - 14 Male ORB	- 90 degree, 7/8-14 inch flare x adj O-ring boss, hand held section of auxiliary valve, see hand held hydraulics on Figure 8-068 for attaching hoses, Incl. Ref. 28
28	237-6010	O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro	10-1, 90 Duro, .755" ID x .097" Thk
29	218-756	CAP,37 Degree, 7/8"-14	If used, not required when hydraulic hoses for hand held or backhoe auxiliary hydraulics are attached to fittings 37º, 7/8"-14
30	218-5243	TEE,9/16" - 18 Male JIC x 9/16" - 18 Male JIC x 9/16" - 18 Male ORB	- 9/16-18 inch flare branch x flare x adj O-ring boss, loader valve inlet section, see Figure 5-04 for attaching steering hose, Includes: Ref. 31
32	192693A1	HOSE	- 1490 mm (58-11/16 inch) long, signal, backhoe valve swing section to loader control valve inlet section, see Figure 8-050 or 8-052 for tee or cross
33	136023A1	TUBE,9.53 mm OD, 252, 194 mm Length	- pilot, backhoe valve swing section center port to signal hose, see Figure 8-050 or 8-052 for tee or cross
38	191532A1	SWITCH	- rocker, auxiliary hydraulics
39	192299A1	DECAL	- auxiliary hydraulics, switch on instrument panel, see Figure 9-136 for decal
40	121413A1	FUSE,15A, Mini, Blue
41	187013A1	HARNESS	- auxiliary hydraulics, attaches to foot switch, solenoid valves and cab harness
9	237-6006	O-RING,0.078" Thk x 0.468" ID, -906, Cl 6, 90 Duro	6-1, 90 Duro, .468" ID x .078" Thk
31	237-6006	O-RING,0.078" Thk x 0.468" ID, -906, Cl 6, 90 Duro	6-1, 90 Duro, .468" ID x .078" Thk