| № | Номер | Название | Опции | Альт |
|---|
| 1 | 30530 | BOLT,Hex Flg, 5/16" - 18 x 2 1/4" | CYLINDER - bucket, hydraulic (Original equipment - use D23774) | |
| D23774 | | CYLINDER - bucket, hydraulic (Replacement only) | |
| 2 | D20036 | ROD | - piston | |
| 3 | 30634 | BUSHING,32.05mm ID x 38.18mm OD x 17.6mm L | - piston rod | |
| 4 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight (1/8" NPT) | |
| 5 | 30574 | WIPER SEAL | SEAL - wiper, piston rod | |
| 6 | 70742 | WASHER | 2.50", Int, #250, seal, piston rod | |
| 7 | D27770 | WASHER | - packing, piston rod (Used with 30567 cylinder end cap only) | |
| D25043 | WASHER | - packing, piston rod (Used with D25596 cylinder end cap only) | |
| 8 | 30568 | PACKING | - piston rod | |
| 9 | 30567 | FLANGE | CAP - end, cylinder (Has no. 30567 on casting) Use D25596 and D25043 | |
| | When replacing cylinder end or cap that has .185" wide "O" ring groove, also order D24987 backup ring, as replacement end or cap has .210" wide "O" ring groove. | | |
| D25596 | | CAP - end, cylinder (Has no. D25596 on casting) When replacing 30567 end cap, also order 1 - D25043 washer | |
| | When replacing cylinder end or cap that has .185" wide "O" ring groove, also order D24987 backup ring, as replacement end or cap has .210" wide "O" ring groove. | | |
| 10 | D24987 | RING | - leather backup (Used only with cylinder end or cap that has .210" wide "O" ring groove) | |
| D25495 | RING | - plastic backup (Used only with cylinder end or cap that has .185" wide "O" ring groove) | |
| 11 | NLS | NO LONGER SERVICED | WASHER - packing, piston | |
| 12 | 17578 | PACKING | - piston | |
| 13 | A7623 | O-RING,0.139" Thk x 0.984" ID, -214, Cl 5, 75 Duro | SEAL - "O" ring (Used with D23736 piston only) | |
| 14 | 30571 | | PISTON - cylinder (No "O" ring) Use D23736, D23688, and A7623 | |
| D23736 | | PISTON - cylinder (With "O" ring) When replacing 30571 piston without "O" ring, also order 1 - A7623 "O" ring and 1 - D23688 locknut | |
| 15 | 131-19 | LOCK NUT,1"-14, GB | NUT - lock (30571 piston only) (1" - 14 NF) | |
| D23688 | X | NUT - lock (D23736 piston only) (1" - 14 NF) | |
| 16 | 30570 | DRAWBAR | TUBE - cylinder | |
| 17 | 30569 | ROD | - tie | |
| 18 | 230-4618 | LOCK NUT,1/2"-20, GA | NUT - lock (1/2" - 20 NF) | |
| 19 | 49381 | O-RING,3.249" ID x 3 1" OD x 0.139" | SEAL - "O" ring, cylinder tube | |
| 20 | D20054 | | END - cylinder | |
| | When replacing cylinder end or cap that has .185" wide "O" ring groove, also order D24987 backup ring, as replacement end or cap has .210" wide "O" ring groove. | | |
| 21 | 30613 | BUSHING,38.33mm ID x 44.45mm OD x 17.6mm L | - cylinder end | |
| 22 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight (1/8" NPT) | |
