| № | Номер | Название | Опции | Альт |
|---|
| 1 | REF | INSTRUCTION | VALVE ASSEMBLY, backhoe control, for correct assembly and components, see Fig. 8-88 - 8-91A | | | 2 | 814-12045 | BOLT,Hex, M12 x 1.75 x 45mm, Cl 8.8 | | | | 3 | 896-11012 | WASHER,13.5mm ID x 24mm OD x 3mm Thk | | | | 4 | 829-1412 | NUT,M12, Cl 10.9 | | | | 5 | 413-624 | BOLT,Hex, 3/8" - 16 x 1-1/2", Gr 5 | | | | 6 | D52275 | WASHER,9.92mm ID x 31.75mm OD x 2.78mm Thk | flat, special, 25/64 x 1-1/4 x 7/64 inch, hardened | | | 7 | D52276 | ISOLATOR,10.16mm ID x 28.07mm OD x mm L | INSULATOR rubber | | | 8 | 218-5064 | HYD CONNECTOR,1-1/16" - 12 Male JIC x 1-1/16" - 12 Male ORB | Adapter, Straight, O-Ring boss, bucket section upper and lower ports, Incl. Ref. 9 | | | 9 | 237-6012 | O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro | | | | 10 | 193499A1 | HOSE,15.88mm ID x 1295mm L | 1295 mm (51 inch) long, includes hose guard and clamp, upper port control valve through swing, Serial Range: tower-boom | | | 10a | 193117A1 | HOSE,15.88mm ID x 1295mm L | 1295 mm (51 inch) long, includes hose guard and clamp, lower port control valve through swing, Serial Range: tower-boom | | | 11 | 143439A1 | CLAMP | Hose, outer | | | 12 | 176226A1 | CLAMP | Hose, Center | | | 13 | 614-8025 | BOLT,Hex, M8 x 1.25 x 25mm, Cl 8.8, Full Thd | | | | 14 | 892-11008 | LOCK WASHER,8mm ID | | | | 15 | 143882A1 | FIXING BRACKET | CLAMP hose, at swing tower | | | 16 | 132212A1 | PLATE | Hose clamp, at swing tower | | | 17 | 814-12100 | BOLT,Hex, M12 x 1.75 x 100mm, Cl 8.8 | | | | 18 | 832-10412 | NUT,M12 x 1.75, Cl 8 | | | | 19 | L18337 | CABLE TIE,9.95"-12.1" lg | CABLE STRAP tie, 15 inch, nylon, retaining | | | 20 | 141806A1 | TUBE,19.05 mm OD, 1624, 103 mm Length | (Tube) - to bucket cylinder rod end, LH side of boom | | | 21 | 141801A1 | TUBE,19.05 mm OD, 1624, 116 mm Length | (Tube - to bucket cylinder closed end, RH side of boom | | | 22 | 133605A1 | CLAMP | Bucket cylinder tubes to inner sides of boom | | | 23 | 814-12080 | BOLT,Hex, M12 x 1.75 x 80mm, Cl 8.8 | | | | 24 | 132930A1 | SPACER | split | | | 25 | 832-10412 | NUT,M12 x 1.75, Cl 8 | | | | 26 | 133604A1 | CLAMP | CLAMP, Serial Range: tube-boom | | | 27 | 814-12060 | BOLT,Hex, M12 x 1.75 x 60mm, Cl 8.8 | | | | 28 | 832-10412 | NUT,M12 x 1.75, Cl 8 | | | | 29 | 183660A1 | HOSE | 640 mm (25-3/16 inch) long, includes hose guard and clamp, righthand bucket tube on boom to bucket cylinder rod end tube | | | 30 | 256091A1 | HYD TUBE,19.05 mm OD, 906, 58 mm Length | TUBE bucket cylinder rod end, no longer available, order P/N 314772A1 | | | 30a | 314772A1 | RIGID TUBE | Bucket cylinder rod end | | | 31 | 218-5064 | HYD CONNECTOR,1-1/16" - 12 Male JIC x 1-1/16" - 12 Male ORB | Adapter, Straight, O-Ring boss, bucket cylinder rod end, Incl. Ref. 32 | | | 32 | 237-6012 | O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro | | | | 33 | REF | INSTRUCTION | CYLINDER ASSEMBLY, 80 (3-1/2) ID x 872 mm (34-5/16 inch) stroke, bucket, parts list Fig. 8-140 | | | 34 | 214-1472 | HOSE CLAMP,#72, 4.06" - 5", Type F Worm | Adj. | | | 35 | 183658A1 | HOSE | 640 mm (25-3/16 inch) long, Includes: Ref. 36, includes hose guard and clamps, left hand bucket tube on boom to bucket cylinder rod end tube | | | 36 | 237-6012 | O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro | | | | 37 | D40236 | CLAMP | hose | | | 38 | 814-10055 | BOLT,Hex, M10 x 1.5 x 55mm, Cl 8.8 | | | | 39 | 832-10410 | NUT,M10 x 1.5, Cl 8 | | | | 40 | 182222A1 | FITTING | RESTRICTOR check, 4.36 mm orifice, bucket section upper port, if used | |
|
|