(344) - THREE-POINT HITCH CONTROL VALVES, FOUR AND FIVE SPOOL VALVE ASSY. D99475 & D99490 CONTROL VALVES

№	Номер	Название	Опции
	D99475	VALVE	CONTROL VALVE - hitch, four-spool, 480D only, Ref. 1 has a main relief valve, no longer used, order D122164 on Figure 344, Includes: Ref. 1 - 20
	D99490	VALVE	CONTROL VALVE - hitch, five-spool, 480LL only, Ref. 1 has a main relief valve, no longer used, order D122165 on Figure 344, Includes: Ref. 1 - 20
1	N7108	VALVE	END SECTION - inlet-outlet, parts list Figure 350
2	N7115	VALVE BLOCK	SECTION - auxiliary, parts list Figure 356
		N7115 auxiliary section has a flow restriction seal (see parts list Figure 356) and is always located next to the inlet-outlet section.
3	N8691	KNIFE SECTION	SECTION - pitch, tilt, and implement, section does not include control lever and mounting, see Refs. 16-20 below, parts list Figure 356
4	N7118	VALVE BLOCK	SECTION - lift, section includes control lever and mounting, parts list Figure 352, if used
4	N8692	KNIFE SECTION	SECTION - lift, section does not include control lever and mounting, see Refs. 16-20 below, parts list Figure 354, if used
	N7028	COVER	END SECTION - cover plate, uses 7/8" - 14 NC plug, if used, Includes: Ref. 5 - 7
5	NSS	NOT SOLD SEPARAT	PLATE - cover
6	86512512	PLUG,7/8" - 14 ORB	Cover plate, Incl. Ref. 7 Hex Hd, 7/8"-14 ORB
7	237-6010	O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro	10-1, 90 Duro, .755" ID x .097" Thk, Plug, Used with Ref. 6
	D122553	PLATE	END SECTION - cover plate, uses 1-1/16" - 12 NC plug, if used, Includes: Ref. 8 - 10
8	NSS	NOT SOLD SEPARAT	PLATE - cover
9	218-5158	PLUG,Hex Hd, 1 1/16"-12 ORB	Cover plate, Includes: Ref. 10 Hex Hd, 1 1/16"-12 ORB
10	218-5008	O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro	- plug, used with Ref. 9
11	A15888	O-RING,0.801" ID x 0.941" OD x 0.07"	- between sections, 13/16" (21 mm) ID
12	A62239	O-RING,0.07" Thk x 0.926" ID, -21, Cl 5, 75 Duro	- between sections, 15/16" (24 mm) ID
13	D86578	BOLT	- tie, 3/8" - 24 NF x 9-1/2", four-spool control valve only
14	N7117	BOLT	- tie, 3/8" - 24 NF x 11-1/4", five-spool control valve only
15	129-123	NUT,3/8"-24, G5
16	H620344	LINK	ASSEMBLY - lever
17	132-13	PIN	COTTER PIN - 1/16" x 1-1/2"
18	N7113	HANDLE	LEVER - section control
19	D88727	PIN	- control lever to spool eye
20	132-379	COTTER PIN,5/64" x 1/2"	PIN, SPLIT (COTTER), 5/64" x 1/2"
	D122164	VALVE	CONTROL VALVE - hitch, four-spool, 480D only, Ref. 21 has a plugged main relief port, if used, Includes: Ref. 21 - 36
	D122165	VALVE	CONTROL VALVE - hitch, five-spool, 480LL only, Ref. 21 has a plugged main relief port, if used, Includes: Ref. 21 - 36
21	D122551	VALVE	END SECTION - inlet-outlet, parts list Figure 350
22	N8691	KNIFE SECTION	SECTION - implement, pitch, and tilt, section does not include control lever and mounting, see Refs. 32-36 below, parts list Figure 356
23	N8692	KNIFE SECTION	SECTION - lift, section does not include control lever and mounting, see Refs. 32-36 below, parts list Figure 354
	D122553	PLATE	END SECTION - cover plate, Includes: Ref. 24 - 26
24	NSS	NOT SOLD SEPARAT	PLATE - cover
25	218-5158	PLUG,Hex Hd, 1 1/16"-12 ORB	Cover plate, Includes: Ref. 26 Hex Hd, 1 1/16"-12 ORB
26	218-5008	O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro	- plug
27	A15888	O-RING,0.801" ID x 0.941" OD x 0.07"	- between sections, 13/16" (21 mm) ID
28	A62239	O-RING,0.07" Thk x 0.926" ID, -21, Cl 5, 75 Duro	- between sections, 15/16" (24 mm) ID
29	D86578	BOLT	- tie, 3/8" - 24 NF x 9-1/2", four-spool control valve only
30	N7117	BOLT	- tie, 3/8" - 24 NF x 11-1/4", five-spool control valve only
31	129-123	NUT,3/8"-24, G5
32	H620344	LINK	ASSEMBLY - lever
33	132-13	PIN	COTTER PIN - 1/16" x 1-1/2"
34	N7113	HANDLE	LEVER - section control
35	D88727	PIN	- control lever to spool eye
36	132-379	COTTER PIN,5/64" x 1/2"	PIN, SPLIT (COTTER), 5/64" x 1/2"