| № | Номер | Название | Опции | Альт |
|---|
| 1 | G101272 | CYLINDER ASSY.,Double Acting, 50.8mm Rod, 254mm Stroke | CYLINDER ASSEMBLY - ripper, right-hand, 4" (102 mm) diameter x 10" (254 mm) stroke, Includes: Ref. 2 - 20 | |
| 1 | G101273 | CYLINDER ASSY.,Double Acting, 50.8mm Rod, 254mm Stroke | CYLINDER ASSEMBLY - ripper, left-hand, 4" (102 mm) diameter x 10" (254 mm) stroke, Includes: Ref. 2 - 20 | |
| 2 | G100284 | TUBE,18.75" L | - G101272 cylinder, right-hand, Includes: Ref. 3 | |
| 2 | G100285 | TUBE,18.75" L | - G101273 cylinder, left-hand, Includes: Ref. 3 | |
| 3 | 30613 | BUSHING,38.33mm ID x 44.45mm OD x 17.6mm L | - tube | |
| G104407 | GLAND | ASSEMBLY - cylinder, Includes: Ref. 4 - 10 | |
| 4 | NSS | NOT SOLD SEPARAT | GLAND - cylinder | |
| 5 | NSS | NOT SOLD SEPARAT | RETAINING RING - gland | |
| 5a | G102569 | PLUG | - nylon, thread-locking, gland, if used | |
| 6 | D95144 | WIPER SEAL,50.77mm ID x 63.52mm OD x 7.92mm Thk | Wiper - piston rod, outer | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105545 | | |
| 7 | G101533 | WEAR RING,Split, 50.8mm ID x 53.87mm OD x 25.15mm Thk | BUSHING - center | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105545 | | |
| 8 | D36971 | RING | U-CUP SEAL - piston rod, wide | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105545 | | |
| | Part of seal kit P/N G100778 | | |
| 8a | G102647 | SEAL | - piston rod, narrow, used in addition to ref. 8 in some glands | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105545 | | |
| 9 | A27507 | O-RING,0.139" Thk x 3.984" ID, -242, Cl 5, 75 Duro | - gland | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105545 | | |
| 10 | G32176 | BACK-UP RING,101.22mm ID x 107.32mm OD x 1.4mm Thk | - Gland O-Ring | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105545 | | |
| 11 | 187-1031 | SELF-TAP SCREW,Pan, 0.164"-32 x 1/4" | SCREW - self-tapping, No. 8 - 32 NC x 1/4", if used, not required when nylon plug is used | |
| 12 | G100290 | ROD | - piston, 2" (51 mm) diameter, Includes: Ref. 13 | |
| 13 | D33047 | BUSHING,44.68mm ID x 53.98mm OD x 22.23mm L | - piston rod | |
| 14 | G100438 | PISTON,100.89mm Bore, 32.8mm Rod, 50.7mm W | - cylinder | |
| 15 | G102285 | SEAL,Locking, 98.55mm ID x 102.97mm OD x 6.96mm Thk | - rubber, piston | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105545 | | |
| 16 | G100440 | RING,Square, 5.28mm Thk x 88.01mm ID | BACKUP RING - piston seal | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105545 | | |
| 17 | G100448 | RING,101.6mm OD, Ext | - wear | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105545 | | |
| 18 | 28-2040 | BOLT,Hex, 1-1/4" - 12 x 2-1/2", Gr 8 | - Hex, 1-1/4"-12 NF x 2-1/2", G8 | |
| 19 | G32351 | WASHER | - hardened | |
| 20 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | GREASE FITTING - straight, 1/8" NPT | |
| G105545 | SEAL | KIT - seal, Includes Includes Refs. 6, 7, 8, 9, 10, 15, 16 and 17 and G102401 kit plus ref. 8A above | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| G100778 | SEAL | - rod, service option - severe heat or cold, Includes Ref 8 | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
