| № | Номер | Название | Опции | Альт |
|---|
| 1 | A183561 | HOUSING | ASSEMBLY transaxle, prior to transaxle SN 202016, no longer available, order 1995141C1 housing and 1995142C1 shift rail, Ref. 1A below and Ref. 21A on Figure 6-66 | | | 1a | 1995141C1 | HOUSING ASSY. | HOUSING ASSEMBLY transaxle SN 202016 and after, used with 1995142C1 shift rail, Ref. 21A on Figure 6-66, Includes: Ref. 2 through 7 | | | 2 | A183013 | BUSHING | SLEEVE wear, shuttle clutch shaft | | | 3 | A188564 | TUBE | cooling, brake | | | 4 | A188001 | TUBE | pinion lubrication | | | 5 | A183210 | CLAMP | tube | | | 6 | 614-10016 | BOLT,Hex, M10 x 1.5 x 16mm, Cl 8.8, Full Thd | | | | 7 | 895-11010 | WASHER,11mm ID x 20mm OD x 2mm Thk | flat, 11 x 21 x 2 mm | | | 8 | A175944 | DOWEL,22.1mm OD x 13.5mm L | SLEEVE dowel, front housing | | | 9 | A188903 | COVER | housing, front, without PTO | | | 9a | A188904 | COVER | housing, front, with PTO | | | 10 | 96-31066 | WASHER,0.66" ID x 1.31" OD x 0.19" Thk | | | | 11 | 828-16080 | BOLT,Hex, M16 x 2 x 80mm, Cl 10.9 | | | | 12 | A186976 | BRACKET | parking brake cable | | | 13 | A188031 | ELBOW | hose fitting, Includes: Ref. 13A | | | 13a | 218-5013 | O-RING,0.118" Thk x 2.337" ID, -932, Cl 6, 90 Duro | elbow | | | 14 | 238-6135 | O-RING,0.103" Thk x 1.925" ID, -135, Cl 6, 90 Duro | | | | 15 | A188034 | SCREEN | FILTER oil suction inlet | | | 16 | 214389 | PLUG,3/4" - 16 ORB | Drain, Includes Ref. 17 Hex Hd, 3/4"-16 ORB | | | 17 | 237-6008 | O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro | 8-1, 90 Duro, .644" ID x .087" Thk | | | 18 | 1971726C1 | BREATHER,1/4" - 18 | housing | | | 19 | A190247 | HALF-BUSHING | BUSHING pinion lubrication tube | | | 20 | A186996 | TUBE ASSY. | TUBE pinion lubrication | | | 21 | A188454 | ADAPTER | lube tube | | | 22 | A186733 | SUPPORT | BRACKET lower baffle | | | 23 | A186606 | FILTER SCREEN | BAFFLE with screen | | | 24 | A188032 | TUBE | suction, oil pick-up | | | 25 | A186993 | BAFFLE | lower right, without PTO | | | 25a | A186992 | BAFFLE | lower right, with PTO | | | 26 | 895-11006 | WASHER,6.6mm ID x 12mm OD x 1.6mm Thk | | | | 27 | 892-11006 | LOCK WASHER,M6 | WASHER, LOCK, M6 | | | 28 | 614-6030 | BOLT,Hex, M6 x 1 x 30mm, Cl 8.8, Full Thd | | | | 29 | A186612 | BAFFLE | main | | | 30 | A186602 | BRACKET | BAFFLE upper right | | | 31 | A186603 | PLATE | BAFFLE upper left | | | 32 | 832-41306 | NUT,M6 x 1, Cl 10 | NUT - hex, self-locking, 6 mm - 1, class 10, prevailing torque | | | 33 | A186601 | BRACKET | RETAINER threaded, upper baffle | | | 34 | A183319 | ORIFICE | clutch pack lubrication, if used | | | 35 | 1341102C1 | GASKET,0.81mm Thk | , Serial Range: valve-housing | | | 36 | REF | INSTRUCTION | VALVE ASSEMBLY power shuttle, for correct assembly and components, see Figures 6-22 - 6-26 | | | 37 | 828-10060 | BOLT,Hex, M10 x 1.5 x 60mm, Cl 10.9 | - hex, 10 - 1.5 x 60 mm, class 10.9 | | | 37a | 861-10060 | HEX SOC SCREW,M10 x 60mm, Cl 12.9 | BOLT hex socket, 10 - 1.5 x 60 mm, class 10.9, if used | | | 38 | J924147 | PLUG,M18 x 1.5 | magnetic, oil drain, if used, replaces J911638 | | | 38a | 934164R1 | PLUG,Hex Soc, M18 x 1.5 | 18 mm, non-magnetic, oil drain, if used | | | 39 | J920773 | SEALING WASHER | WASHER sealing, replaces J900216 washer | | | 40 | A190137 | COVER ASSY | COVER housing, rear, without PTO | | | 41 | 806-16025 | BOLT,Hex, M16 x 2 x 25mm, Cl 10.9 | hex, 16 - 2 x 25 mm, class 10.9, without PTO | | | 42 | 628-20030 | SCREW,Hex, M20 x 2.5 x 30mm, Cl 10.9, Full Thd | BOLT hex, 20 - 2.5 x 30 mm, class 10.9, without PTO | | | 43 | 828-16060 | BOLT,Hex, M16 x 2 x 60mm, Cl 10.9 | without PTO Hex, M16 x 60, 10.9, Full Thd | | | 44 | 829-1316 | NUT,M16, Cl 10 | hex, 16 mm, without PTO | | | 45 | 96-81009 | WASHER,11/16" x 1 1/2" x .134", HDN | lower LH and upper RH corner of rear housing cover, without PTO 11/16" x 1 1/2" x .134", HDN | | | 46 | A183331 | DIPSTICK | oil level, without PTO | |
|
|