| № | Номер | Название | Опции | Альт |
|---|
| 1 | G101268 | CYLINDER | ASSEMBLY - tilt, right-hand, 4" (102 mm) diameter x 5-1/4" (133 mm) stroke, not shown, Includes: Ref. 2 - 19 | |
| 1 | G101269 | CYLINDER | ASSEMBLY - tilt, left-hand, 4" (102 mm) diameter x 5-1/4" (133 mm) stroke, not shown, Includes: Ref. 2 - 19 | |
| 2 | G34058 | TUBE | - G101268 cylinder | |
| 2 | G34059 | TUBE | - G101269 cylinder | |
| G104941 | GLAND | ASSEMBLY - cylinder, Includes: Ref. 4 - 10 | |
| 4 | NSS | NOT SOLD SEPARAT | GLAND - cylinder | |
| 4a | G102569 | PLUG | - nylon, thread-locking, gland, if used | |
| 5 | NSS | NOT SOLD SEPARAT | RETAINING RING - gland | |
| 6 | D95145 | WIPER SEAL,54.79mm ID x 70.09mm OD x 7.91mm W | WIPER - piston rod | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105556 | | |
| 7 | G102426 | BUSHING,57.15mm ID x 60.22mm OD x 37.85mm L | - Center | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105556 | | |
| 8 | D39359 | RUBBER SEAL | U-CUP SEAL - piston rod, wide | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G100779 | | |
| | Part of seal kit P/N G105556 | | |
| 8a | G103447 | RING | SEAL - piston rod, narrow, used in addition to ref. 8 in some glands | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105556 | | |
| 9 | A27507 | O-RING,0.139" Thk x 3.984" ID, -242, Cl 5, 75 Duro | - gland | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105556 | | |
| 10 | G32176 | BACK-UP RING,101.22mm ID x 107.32mm OD x 1.4mm Thk | - Gland O-Ring | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105556 | | |
| 11 | 187-1031 | SELF-TAP SCREW,Pan, 0.164"-32 x 1/4" | SCREW - self-tapping, No. 8 - 32 NC x 1/4", if used, not required when nylon plug is used | |
| 12 | G34054 | ROD | - piston, 2-1/4" (57 mm) diameter | |
| 13 | G100686 | PISTON | - cylinder | |
| 14 | G102285 | SEAL,Locking, 98.55mm ID x 102.97mm OD x 6.96mm Thk | - piston | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105556 | | |
| 15 | G100440 | RING,Square, 5.28mm Thk x 88.01mm ID | BACKUP RING - piston seal | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105556 | | |
| 16 | G100448 | RING,101.6mm OD, Ext | - wear | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105556 | | |
| 17 | 28-2040 | BOLT,Hex, 1-1/4" - 12 x 2-1/2", Gr 8 | - Hex, 1-1/4"-12 NF x 2-1/2", G8 | |
| 18 | G32351 | WASHER | - hardened | |
| 19 | G34056 | BUSHING | SPACER - piston and gland | |
| G105556 | SEAL | KIT - seal, Includes Refs. 6, 7, 8, 9, 10, 14, 15 and 16 same as G102412 kit plus ref. 8A above | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| G100779 | SEAL | - rod, service option - severe heat or cold, Includes Ref 8 | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
