| № | Номер | Название | Опции | Альт |
|---|
| 1 | D30523 | | HOSE - suction (1" I.D. x 1-1/2" O.D. x 18" long) (Used before ldr. sn. 4096200) | |
| 2 | 214-256 | HOSE CLAMP,#20, 0.81" - 1.75", Type F Worm | CLAMP - D30523 hose | |
| 3 | R14353 | CONNECTOR, ELEC | CONNECTOR - reservoir, 3/4" NPT x 1" O.D. tube (Used before ldr. sn. 4096200) | |
| 4 | D31349 | ELBOW | - 90 degree adj., 1-1/4" JIC x 1" O.D. tube (Used before ldr. sn. 4096200), Includes: Ref. 5 | |
| 5 | 218-5011 | O-RING,0.118" Thk x 1.475" ID, -920, Cl 6, 90 Duro | SEAL - "O" ring , D31349 elbow | |
| 6 | R13911 | HOSE,31.80 mm ID x 101.60 mm ID, SAE 100R3 | - suction (Used on ldr. sn. 4096200 and after) 31.80 mm ID x 101.60 mm ID, SAE 100R3 | |
| 7 | 214-258 | HOSE CLAMP,#28, 1.31" - 2.25", Type F Worm | - R13911 hose #28, 1.31/2.25 Type F Worm | |
| 8 | D33363 | FITTING | CONNECTOR - reservoir, 1" NPT x 1-1/4" O.D. tube (Used on ldr. sn. 4096200 and after) | |
| 9 | D33822 | TUBE - suction, (Used on ldr. sn. 4096200 thru 4110811) | | |
| 11 | D30511 | FITTING | ELBOW - 90 degree adj., 1-1/4" JIC x 1-1/4" O.D. tube (Used on ldr. sn. 4096200 thru 4110811), Includes: Ref. 12 | |
| 12 | 218-5011 | O-RING,0.118" Thk x 1.475" ID, -920, Cl 6, 90 Duro | SEAL - "O" ring, D30511 elbow | |
| 15 | REF | INSTRUCTION | PUMP - hydraulic (See Figures 34 and 35A for proper valve) | |
| 16 | 13-828 | BOLT,Hex, 1/2" - 13 x 1-3/4", Gr 5 | HHCS - 1/2" - 13 NC x 1-3/4" | |
| 17 | 92-8 | LOCK WASHER,1/2" | med. sect. 1/2" | |
| 18 | 218-5110 | ELBOW,90 Degree Elbow, 1-5/16" - 12 Male JIC x 1-5/16" - 12 Male ORB | 90º, adjustable, 1" JIC, Incl. Ref. 19 | |
| 19 | 218-5010 | O-RING,0.116" Thk x 1.171" ID, -916, Cl 6, 90 Duro | SEAL - "O" ring | |
| 20 | D30563 | TUBE ASSY. | TUBE - from pump, short | |
| 21 | D30513 | TUBE ASSY. | TUBE - to valve, long (Early production) When stock is exhausted, use D33579 tube and D24646 hose | |
| 22 | D31513 | CLAMP - D30513 tube (Use R11405) | | |
| 23 | D33579 | TUBE | - to valve, long (Late production) Used with D24646 hose | |
| 24 | R11405 | CLAMP | - D30513 or D33579 tubes | |
| 25 | 13-58 | BOLT,Hex, 5/16" - 18 x 1/2", Gr 5 | | |
| 26 | 92-5 | LOCK WASHER,5/16" | WASHER - med. sect. lock, 5/16" | |
| 27 | D24646 | HOSE ASSY. | HOSE - D33579 tube to valve (3/4" I.D. x 1-1/4" O.D. x 25" long) | |
| 28 | D28890 | CONNECTOR, ELEC | CONNECTOR - male (3/4" JIC x 1" JIC), Includes: Ref. 29 | |
| 29 | 218-5010 | O-RING,0.116" Thk x 1.171" ID, -916, Cl 6, 90 Duro | SEAL - "O" ring, D28890 connector | |
| 30 | D31264 | | VALVE - loader control, early production (Parts list Figure 36) When stock is exhausted, use D32769 | |
| 31 | D32769 | CONTROL VALVE | VALVE - loader control (Parts list Figure 40) | |
| 32 | 13-664 | BOLT,Hex, 3/8" - 16 x 4", Gr 5 | (Inside) Hex, 3/8"-16 x 4", G5 | |
| 33 | 13-660 | BOLT,Hex, 3/8" - 16 x 3-3/4", Gr 5 | HHCS - 3/8" - 16 NC x 3/4" (Outside) | |
| 34 | 92-6 | LOCK WASHER,3/8" | med. sect. 3/8" | |
| 35 | 25-106 | NUT,3/8"-16, G5 | - hex. (3/8" - 16 NC) | |
| 36 | 218-5158 | PLUG,Hex Hd, 1 1/16"-12 ORB | Pipe, 3/4" JIC, Includes: Ref. 37 - 39 Hex Hd, 1 1/16"-12 ORB | |
| 37 | 218-5008 | O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro | SEAL - "O" ring, 218-5158 plug | |
| 38 | D31363 | | ELBOW - 90 degree adj., 3/4" JIC x 1/8" NPT x 1" O.D. tube | |
| 39 | 218-5008 | O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro | SEAL - "O" ring, D31363 elbow | |
| 40 | 221-411 | ELBOW,90 Degree, 1/8"-27, NPT | Street 90º, 1/8"-27, NPT | |
| 41 | D29650 | ELECTRICAL GAUGE | GAUGE - hyd. oil pressure | |
| 42 | D30524 | | HOSE - to filter (1" I.D. x 1-1/2" O.D. x 9" long) | |
| 43 | 214-256 | HOSE CLAMP,#20, 0.81" - 1.75", Type F Worm | CLAMP - D30524 hose | |
| 44 | 221-211 | PIPE,Nipple, 3/4" NPT x 1 3/8" | NIPPLE - 3/4" NPT x 1-3/8" long (If used) | |
| 45 | 221-65 | REDUCER,Hex, 1" x 3/4" NPT | BUSHING - reducing, 1" NPT to 3/4" NPT (Used with D32254 filter) If required | |
| 46 | 217-156 | FITTING,1" Hose Barb x 1" Male NPTF | CONNECTOR - filter inlet, str. (1" NPT x 1" O.D. tube) If used | |
| 48 | REF | INSTRUCTION | FILTER - hyd. oil (See Figures 70 and 71A for proper filter) | |
| 49 | 13-816 | BOLT,Hex, 1/2" - 13 x 1", Gr 5, Full Thd | | |
| 50 | 92-8 | LOCK WASHER,1/2" | med. sect. 1/2" | |
| 51 | 195-33 | WASHER,1/2" | - plain () 1/2" | |
| 52 | 221-415 | ELBOW,90 Degree, 3/4"-14, NPT | Street, If used 90º, 3/4"-14, NPT | |
| 53 | 221-215 | PIPE,Nipple, 3/4" NPT x 2" | NIPPLE - 3/4" NPT - 2" long (If used) | |
| 54 | 221-1405 | ELBOW,45 Degree, 3/4"-14, NPT | - street, 45 degrees (3/4" NPT) If used | |
| 55 | 217-136 | ELBOW,90 Degree Elbow, 1" Hose Barb x 1" Male NPTF | - filter outlet, 90 degrees (1" NPT x 1" O.D. tube) If used | |
| 56 | D30525 | HOSE | - return (1" I.D. x 1-1/2" O.D. x 28-1/2" long) Used with 221-215 nipples | |
| 57 | D32678 | HOSE | - return (1" I.D. x 1-1/2" O.D. x 29" long) Used with 217-136 and D33590 elbows | |
| 58 | 214-256 | HOSE CLAMP,#20, 0.81" - 1.75", Type F Worm | CLAMP - return hose | |
| 59 | D28486 | ELBOW - 90 degree street (3/4" NPT) If used | | |
| 60 | D33590 | | ELBOW - 90 degrees, 3/4" NPT x 1" O.D. tube (If used) | |
| 61 | 221-14 | DRAIN PLUG,Sq Hd, 1/2"-14 NPTF | PLUG - 1/2" NPT | |
| 62 | D23143 | FITTING | ELBOW - male, 90 degrees (Long) Rear valve port to lift cyl. tube (5/8" JIC x 5/8" JIC), Includes: Ref. 63 | |
| 63 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | 10-1, 90 Duro, .755" ID x .097" Thk, D23143 elbow | |
| 64 | 218-5107 | 90 ELBOW,90 Degree Elbow, 7/8" - 14 Male JIC x 7/8" - 14 Male ORB | - male, 90 degrees (Short) Front valve port to lift cyl. tube (5/8" JIC x 5/8" JIC), Incl. Ref. 65 | |
| 65 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | 10-1, 90 Duro, .755" ID x .097" Thk, 218-5007 elbow | |
| 66 | D31357 | | TUBE - from rear port | |
| 67 | D31350 | | TUBE - from front port | |
| 68 | 218-595 | TEE,7/8"-14, 37 Degree | - male (5/8" JIC) | |
| 69 | NLS | NO LONGER SERVICED | - to R.H. lift cyl. (Long) | |
| 70 | D31356 | TUBE | - to R.H. lift cyl. (Short) | |
| 71 | D30531 | TUBE ASSY. | TUBE - cross-over (Front) | |
| 72 | D30565 | TUBE | - cross-over (Rear) | |
| 73 | D30533 | HOSE | - to rear cylinder ports (1/2" I.D. x 1" O.D. x 26" long), Includes: Ref. 74 | |
| 74 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | 10-1, 90 Duro, .755" ID x .097" Thk, D30533 hose | |
| 75 | D30541 | HOSE | - to front cyl. ports (1/2" I.D. x 1" O.D. x 27-1/2" long) | |
| 76 | 70724 | | CLAMP - plate (If used) | |
| 77 | 13-532 | BOLT,Hex, 5/16" - 18 x 2", Gr 5 | (If used) Hex, 5/16"-18 x 2", G5 | |
| 78 | 92-5 | LOCK WASHER,5/16" | WASHER - med. sect. lock, , if used 5/16" | |
| 79 | 9635082 | NUT,5/16" - 18, Gr 5 | - hex. (5/16" - 18 NC) If used | |
| 80 | 214-264 | HOSE CLAMP,#52, 2.81" - 3.75", Type F Worm | CLAMP - tube (If used) | |
| 81 | D31460 | TUBE | - R.H. lift cyl. | |
| 82 | D31459 | TUBE | - L.H. lift cyl. | |
| 83 | 218-5062 | HYD CONNECTOR,7/8"-14, 37 Degree x 7/8"-14, O-Ring | CONNECTOR - 5/8" JIC x 5/8" JIC, Includes: Ref. 84 | |
| 84 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | 10-1, 90 Duro, .755" ID x .097" Thk, 218-5062 connector | |
| 85 | D31463 | LIFT CYLINDER | CYLINDER - lift, R.H. (Parts list Figure 66 and 66[1]) | |
| 86 | D31464 | CYLINDER | - lift, L.H. (Parts list Figure 66[1]) | |
| 87 | D25137 | TEE | - adj. (5/8" JIC) Rear valve port to bucket cyl. hose, Includes: Ref. 88 | |
| 88 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | 10-1, 90 Duro, .755" ID x .097" Thk, D25137 tee | |
| 89 | 50003 | ELBOW | - 90 degree swivel, 5/8" JIC | |
| 90 | D26168 | | TEE - adj. (5/8" JIC) Front vlave port to bucket cyl. hose | |
| 91 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | 10-1, 90 Duro, .755" ID x .097" Thk, D26168 tee | |
| 92 | D30537 | HOSE | - to rear port hydra-leveling cyl. (1/2" I.D. x 1" O.D. x 19-3/8" long), Includes: Ref. 93 | |
| 93 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | 10-1, 90 Duro, .755" ID x .097" Thk, D30537 hose | |
| 94 | D30539 | HOSE ASSY. | HOSE - to front port hydra-leveling cyl. (1/2" I.D. x l" O.D. x 23-1/8" long), Includes: Ref. 95 | |
| 95 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | 10-1, 90 Duro, .755" ID x .097" Thk, D30539 hose | |
| 96 | D31225 | | CYLINDER - hydra-leveling (Parts list Figure 70) | |
| 97 | D30543 | HOSE,12.7mm ID x 736.6mm L, SAE 100R2 | - to bucket cyl. tubes (3/8" I.D. x 1" O.D. x 29" long) | |
| 98 | R15257 | CLAMP | - plate, plastic coated (If used) See refs 102-106 | |
| 99 | D20302 | CLAMP,7/8", Insul, 3/8" Bolt | - hose, plastic coated (If used) See refs 102-106 | |
| 100 | 13-524 | BOLT,Hex, 5/16" - 18 x 1-1/2", Gr 5 | - 5/16"-18 NC x 1-1/2" | |
| 101 | 92-5 | LOCK WASHER,5/16" | WASHER - med. sect. lock, 5/16" | |
| 102 | 9635082 | NUT,5/16" - 18, Gr 5 | - hex. (5/16" - 18 NC) | |
| 103 | D33316 | CLAMP | - plate, plastic coated | |
| 104 | 13-532 | BOLT,Hex, 5/16" - 18 x 2", Gr 5 | | |
| 105 | D33554 | BUSHING | SPACER - clamp plates | |
| 106 | 95-5 | WASHER,3/8" x 7/8" x .083" | - std. wrot (3/8" I.D. x 7/8" O.D. x 5/64" thick) | |
| 107 | 131-4 | LOCK NUT,5/16"-18, GB | NUT - hex., lock (5/16" - 18 NC) | |
| 108 | D31361 | TUBE | - on lift arm, outside | |
| 109 | D31359 | TUBE | - on lift arm, inside | |
| 110 | 38331 | PLATE | CLAMP - tube, metal (Use R17319) | |
| 111 | R17319 | CLAMP | - tube, plastic coated | |
| 112 | 13-516 | BOLT,Hex, 5/16" - 18 x 1", Gr 5 | | |
| 113 | 92-5 | LOCK WASHER,5/16" | WASHER - med. sect. lock, 5/16" | |
| 114 | D33551 | BUSHING | SPACER - R17319 clamp (Bucket cyl. tubes only) | |
| 115 | D33552 | BUSHING | SPACER - R17349 clamp (Cross-over tubes only) | |
| 116 | D31370 | HOSE | - to R.H. cylinder (1/2" I.D. x 1" O.D. x 30-7/16" long) | |
| 117 | D25137 | TEE | - adj., front port (5/8" JIC), Includes: Ref. 118 | |
| 118 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | 10-1, 90 Duro, .755" ID x .097" Thk, D25137 tee | |
| 119 | D31365 | 3 WAY CONNECTION | TEE - adj. (5/8" JIC x 1/2" JIC) | |
| 120 | D31368 | HOSE | - cross-over, front (1/2" I.D. x 1" O.D. x 29-3/4" long), Includes: Ref. 121 | |
| 121 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | 10-1, 90 Duro, .755" ID x .097" Thk, D31368 | |
| 122 | D31366 | HOSE ASSY. | HOSE - cross-over, rear (1/2" I.D. x 1" O.D. x 30" long) | |
| 123 | 31665 | COLLAR CLAMP | CLAMP - plate, metal (Use D33316) | |
| 124 | D33316 | CLAMP | - plate, plastic coated (R.H. side) | |
| 125 | D32039 | CLAMP | - plate, L.H. side (Upper) | |
| 126 | D32040 | CLAMP | - plate, L.H. side (Lower) | |
| 127 | 13-532 | BOLT,Hex, 5/16" - 18 x 2", Gr 5 | | |
| 128 | 92-5 | LOCK WASHER,5/16" | WASHER - med. sect. lock, 5/16" | |
| 129 | 9635082 | NUT,5/16" - 18, Gr 5 | - hex. (5/16" - 18 NC) | |
| 130 | D31372 | TUBE | - bucket cyl. | |
| 131 | D25667 | ELBOW | - 90 degree male, rear ports (1/2" JIC x 5/8" JIC) | |
| 132 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | 10-1, 90 Duro, .755" ID x .097" Thk, D25667 elbow | |
| 133 | D31100 | HYDRAULIC CYLINDER | CYLINDER - dump, R.H. (Parts list Figure 68) | |
| 134 | D31101 | CYLINDER ASSY. | CYLINDER - dump, L.H. (Parts list Figure 68) | |
