| № | Номер | Название | Опции | Альт |
|---|
| 1 | G101270 | CYLINDER | ASSEMBLY - dozer lift, right-hand, 3-1/2" (89 mm) diameter x 36-3/4" (933 mm) stroke, not shown, Includes: Ref. 2 - 23 | |
| 1 | G101271 | CYLINDER | ASSEMBLY - dozer lift, left-hand, 3-1/2" (89 mm) diameter x 36-3/4" (933 mm) stroke, not shown, Includes: Ref. 2 - 23 | |
| 2 | G34080 | CYLINDER,43.83" L | TUBE - G101270 cylinder, Includes: Ref. 3 | |
| 2 | G34081 | TUBE,43.83" L | - G101271 cylinder, Includes: Ref. 3 | |
| 3 | D31140 | BUSHING,38.33mm ID x 47.63mm OD x 25.4mm L | - tube | |
| G34623 | GLAND | ASSEMBLY - cylinder, Includes: Ref. 5 - 11 | |
| 5 | NSS | NOT SOLD SEPARAT | GLAND - cylinder | |
| 5a | G102569 | PLUG | - nylon, thread-locking, gland, if used | |
| 6 | G34600 | RING | RETAINING RING - gland | |
| 7 | D95143 | WIPER SEAL,44.42mm ID x 57.17mm OD x 7.92mm Thk | WIPER - piston rod | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105554 | | |
| 8 | G102425 | BUSHING,44.45mm ID x 47.45mm OD x 25.1mm Thk | - center | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105554 | | |
| 9 | D36970 | CUP | U-CUP SEAL - piston rod, wide | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105554 | | |
| | Part of seal kit P/N G100777 | | |
| 9a | G103705 | SEAL | - piston rod, narrow, used in addition to ref. 9 in some glands | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105554 | | |
| 10 | G15457 | O-RING,0.139" Thk x 3.484" ID, -238, Cl 5, 75 Duro | - gland | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105554 | | |
| 11 | G32126 | BACK-UP RING,89.28mm ID x 95.38mm OD x 1.4mm Thk | BACKUP RING - gland O-ring | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105554 | | |
| 12 | 187-1031 | SELF-TAP SCREW,Pan, 0.164"-32 x 1/4" | SCREW - self-tapping, No. 8 - 32 NC x 1/4", if used, not required when nylon plug is used | |
| 13 | G34078 | PISTON | ROD - piston, 1-3/4" (44 mm) diameter, Includes: Ref. 14 and 15 | |
| 14 | D36203 | BUSHING,38.1mm ID x 61.91mm OD x 33.33mm W | - piston rod, self-aligning | |
| 15 | A10506 | SNAP RING,2.44", Int, #244 | Ring, Snap, , bushing 2.44", Int, #244 | |
| 16 | G100698 | PISTON | - cylinder | |
| 17 | G102286 | SEAL,Locking, 85.47mm ID x 90.19mm OD x 6.96mm Thk | - piston | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105554 | | |
| 18 | G100710 | RING,Square, 5.28mm Thk x 75.31mm ID | BACKUP RING - piston seal | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105554 | | |
| 19 | G100711 | SEAL,Split, 82.55mm ID x 88.9mm OD x 9.52mm Thk | | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105554 | | |
| 20 | | RESERVED | | |
| 21 | 28-1640 | BOLT,Hex, 1" - 14 x 2-1/2", Gr 8 | (superfine thread) Hex, 1"-14 x 2 1/2", G8, Full Thd | |
| 22 | G32303 | WASHER,26.97mm ID x 47.63mm OD x 3.58mm Thk | - hardened | |
| 23 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | GREASE FITTING - straight, 1/8" NPT | |
| G105554 | SEAL | KIT - seal, Includes Refs. 7, 8, 9, 10, 11, 17, 18 and 19 same as G102410 kit plus ref. 9A above | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| G100777 | SEAL,44.42mm ID x 57.28mm OD x 10.69mm Thk | - rod, service option - severe heat or cold, Includes Refs. 9 | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
