| № | Номер | Название | Опции | Альт |
|---|
| 1 | G101264 | CYLINDER | ASSEMBLY - lift, right-hand, 3-1/2" (89 mm) diameter x 39-1/4" (997 mm) stroke, order G103102 for service, not shown, Includes: Ref. 2 - 29 | |
| 1 | G101265 | CYLINDER | ASSEMBLY - lift, left-hand, 3-1/2" (89 mm) diameter x 39-1/4" (997 mm) stroke, order G103013 for service, not shown, Includes: Ref. 2 - 29 | |
| 1 | G103102 | CYLINDER | ASSEMBLY - lift, right-hand, 3-1/2" (89 mm) diameter x 39-1/4" (997 mm) stroke, not shown, Includes: Ref. 2 - 29 | |
| 1 | G103103 | CYLINDER | ASSEMBLY - lift, left-hand, 3-1/2" (89 mm) diameter x 39-1/4" (997 mm) stroke, not shown, Includes: Ref. 2 - 29 | |
| 2 | G34070 | TUBE,48.54" L | - right-hand cylinders, Includes: Ref. 3 | |
| 2 | G34071 | TUBE | - left-hand cylinders, Includes: Ref. 3 | |
| 3 | D31140 | BUSHING,38.33mm ID x 47.63mm OD x 25.4mm L | - tube | |
| G34623 | GLAND | ASSEMBLY - cylinder, Includes: Ref. 4 - 10 | |
| 4 | NSS | NOT SOLD SEPARAT | GLAND - cylinder | |
| 4a | G102569 | PLUG | - nylon, thread-locking, gland, if used | |
| 5 | G34600 | RING | RETAINING RING - gland (Replaced NSS) | |
| 6 | D95143 | WIPER SEAL,44.42mm ID x 57.17mm OD x 7.92mm Thk | WIPER - piston rod | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105554 | | |
| 7 | G102425 | BUSHING,44.45mm ID x 47.45mm OD x 25.1mm Thk | - center | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105554 | | |
| 8 | D36970 | CUP | U-CUP SEAL - piston rod, wide | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105554 | | |
| | Part of seal kit P/N G100777 | | |
| 8a | G103705 | SEAL | - piston rod, narrow, used in addition to ref. 8 in some glands | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105554 | | |
| 9 | G15457 | O-RING,0.139" Thk x 3.484" ID, -238, Cl 5, 75 Duro | - gland | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105554 | | |
| 10 | G32126 | BACK-UP RING,89.28mm ID x 95.38mm OD x 1.4mm Thk | BACKUP RING - gland O-ring | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105554 | | |
| 11 | 187-1031 | SELF-TAP SCREW,Pan, 0.164"-32 x 1/4" | SCREW - self-tapping, No. 8 - 32 NC x 1/4", if used, not required when nylon plug is used | |
| 12 | G34074 | PISTON | ROD - piston, 1-3/4" (44 mm) diameter, Includes: Ref. 13 and 14 | |
| 13 | D46942 | BEARING,1.75" ID x 2.8125" OD x 1.526" | BUSHING - self-aligning | |
| 14 | F61018 | SNAP RING,M73, Int | Ring, Snap, , bushing 2.812", Int, #281 | |
| 15 | G100696 | PISTON | - cylinder | |
| 16 | G102286 | SEAL,Locking, 85.47mm ID x 90.19mm OD x 6.96mm Thk | BACKUP RING - piston seal | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105554 | | |
| 17 | G100710 | RING,Square, 5.28mm Thk x 75.31mm ID | SEAL - piston | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105554 | | |
| 18 | G100711 | SEAL,Split, 82.55mm ID x 88.9mm OD x 9.52mm Thk | | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105554 | | |
| G103099 | LOCK VALVE | BYPASS VALVE ASSEMBLY - cylinder, Includes: Ref. 19 - 22 | |
| 19 | G32723 | BOLT | - special | |
| 20 | G104187 | SPOOL | PLUNGER - bypass valve | |
| 21 | G32722 | BUSHING | SEAT - plunger | |
| 22 | A17526 | O-RING,0.614" ID x 0.754" OD x 0.7" | - plunger seat | |
| 23 | G32351 | WASHER | - hardened | |
| 24 | G101523 | SPRING | - cylinder | |
| 25 | G100086 | BLOCK | RETAINER - spring | |
| 26 | G100087 | PIN | - retainer | |
| 27 | G34976 | BUSHING | COLLAR - pin | |
| 28 | 138-55 | LOCK PIN,1/8" x 5/8", Slotted | PIN, 1/8" x 5/8", Slotted | |
| 29 | 219-55 | LUBE NIPPLE,90 Degree Elbow, 1/8" - 27 NPTF | NIPPLE, LUBE, , Replaces straight grease fitting used on some models 90º, 1/8" NPT x .84" lg | |
| G105554 | SEAL | KIT - seal, Includes Refs. 6, 7, 8, 9, 10, 16, 17 and 18 same as G102410 kit plus ref. 8A above | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| G100777 | SEAL,44.42mm ID x 57.28mm OD x 10.69mm Thk | - piston rod, service option - severe heat or cold, Includes Refs. 8 | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
