(328) - BACKHOE CONTROL VALVE, BOOM SECTION, 480D MODELS ONLY

№	Номер	Название	Опции
	G103399	KNIFE SECTION	SECTION ASSEMBLY - boom, no longer available, order G109514 section assembly on Figure 332, Includes: Ref. 1 - 28
1	NSS	NOT SOLD SEPARAT	BODY - section
2	NSS	NOT SOLD SEPARAT	SPOOL - boom section
3	A27365	O-RING,0.103" Thk x 0.75" ID, -116, Cl 5, 75 Duro	- body
4	A32309	SEAL,18.8mm ID x 25.5mm OD x 3.1mm Thk	- spool
5	G102711	RETAINER COLLAR,19.3 mm ID x 32.97 mm OD	- O-ring
6	G34463	SPRING	CENTERING SPRING - spool
7	G33075	RETAINER,12.2mm ID, 27.9mm OD	SEAT - centering spring
8	G33077	SNAP RING,#47, Ext	Ring, Snap, , retainer #47, Ext
9	G33080	CAP	- centering spring
10	G33081	VALVE POPPET	POPPET - load check valve
11	G33573	SPRING	- load check valve
12	G33084	PLUG	- load check valve
13	G33686	O-RING,0.07" Thk x 0.61" ID	- plug
	G34052	KIT	CIRCUIT RELIEF VALVE ASSEMBLY - upper, spool eye end, with round retainer & snap ring at outer end of circuit relief cap, used in production, no longer available, replaced by G109441 valve in production,see Fig.332,orderG109448 kitforservice, Inc. 14 - 28
		The pressure setting of the repair circuit relief valve is not preset for this application. Adjust the setting accotding to the instructions sent with the repair valve and according to the service manual.
14	NSS	NOT SOLD SEPARAT	BODY - circuit relief valve
15	NSS	NOT SOLD SEPARAT	POPPET - circuit relief valve
16	A28090	O-RING,0.301" ID x 0.441" OD x 0.07"	-011, 70 Duro, .301" ID x .070" Thk - Poppet
17	G105693	VALVE SPRING	SPRING - circuit relief valve, outer
18	G33241	PIN	- stop, relief valve
19	G33091	PISTON	- circuit relief valve
20	G102845	O-RING,0.07" Thk x 0.489" ID, -14, Cl 6, 90 Duro	- piston
21	G33092	RETAINER	- circuit relief valve
22	G46150	SNAP RING,0.75", Int, #75	Ring, Snap, , circuit relief valve 0.75", Int, #75
23	G102782	SET SCREW,1/4" - 20 x 1"	SET SCREW - hex socket, 1/4" - 20 NC x 1"
24	G102781	WASHER	- special, if used
25	129-141	JAM NUT,Jam, 1/4"-20, G5
26	218-5008	O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro	- large
27	G107675	O-RING,0.07" Thk x 0.739" ID, -18, Cl 6, 90 Duro	- small
28	G35540	BACK-UP RING,19.43mm ID x 22.23mm OD x 1.32mm Thk	BACKUP RING - small O-ring, if used
	G109448	KIT	- service for G34052, includes G109446 relief valve assembly Refs. (14-28) and an instruction sheet
		The pressure setting of the repair circuit relief valve is not preset for this application. Adjust the setting accotding to the instructions sent with the repair valve and according to the service manual.
	G34043	KIT	CIRCUIT RELIEF VALVE ASSEMBLY - lower, spool cap end, with round retainer&snap ring at outer end of circuit relief valve cap, used in production, no longer available, replaced by G107786valveinproduction,seeFig.332,orderG109449 kitforservice,Inc.29 - 42
		The pressure setting of the repair circuit relief valve is not preset for this application. Adjust the setting accotding to the instructions sent with the repair valve and according to the service manual.
29	NSS	NOT SOLD SEPARAT	BODY - circuit relief valve
30	NSS	NOT SOLD SEPARAT	POPPET - circuit relief valve
31	A28090	O-RING,0.301" ID x 0.441" OD x 0.07"	-011, 70 Duro, .301" ID x .070" Thk - Poppet
32	G105693	VALVE SPRING	SPRING - circuit relief valve
33	G33091	PISTON	- circuit relief valve
34	G102845	O-RING,0.07" Thk x 0.489" ID, -14, Cl 6, 90 Duro	- piston
35	G33092	RETAINER	- circuit relief valve
36	G46150	SNAP RING,0.75", Int, #75	Ring, Snap, , circuit relief valve 0.75", Int, #75
37	G102782	SET SCREW,1/4" - 20 x 1"	SET SCREW - hex socket, 1/4" - 20 NC x 1"
38	G102781	WASHER	- special, if used
39	129-141	JAM NUT,Jam, 1/4"-20, G5
40	218-5008	O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro	- large
41	G107675	O-RING,0.07" Thk x 0.739" ID, -18, Cl 6, 90 Duro	- small
42	G35540	BACK-UP RING,19.43mm ID x 22.23mm OD x 1.32mm Thk	BACKUP RING - small O-ring, if used
	G109449	KIT	- service for G34043, includes G109447 relief valve assembly Refs. (29-42) and an instruction sheet
		The pressure setting of the repair circuit relief valve is not preset for this application. Adjust the setting accotding to the instructions sent with the repair valve and according to the service manual.