| № | Номер | Название | Опции | Альт |
|---|
| 1 | G34638 | CYLINDER ASSY. | CYLINDER ASSEMBLY - right-hand clam, 4-1/2" (114 mm) ID x 10-1/2" (267 mm) stroke, Includes: Ref. 2 - 22 | |
| 1 | G34639 | CYLINDER | ASSEMBLY - left-hand clam, 4-1/2" (114 mm) ID x 10-1/2" (267 mm) stroke, Includes: Ref. 2 - 22 | |
| 2 | G34640 | TUBE,19.89" L | - G34638 cylinder, right-hand, Includes: Ref. 3 and 4 | |
| 2 | G34641 | JACK BODY,4.495" ID x 5.12" OD x 19.89" L | TUBE - G34639 cylinder, left-hand, Includes: Ref. 3 and 4 | |
| 3 | D38943 | BUSHING,51.02mm ID x 63.5mm OD x 28.6mm L | - tube | |
| 4 | 221-844 | PLUG,Hex Soc, 1/2"-14 | - square head, 1/2" NPT | |
| G104950 | GLAND | ASSEMBLY - cylinder, interchangeable with G34632 gland assembly, Includes: Ref. 5 - 11 | |
| 5 | NSS | NOT SOLD SEPARAT | GLAND - cylinder | |
| 6 | NSS | NOT SOLD SEPARAT | RETAINING RING - gland | |
| 6a | G102569 | PLUG | - nylon, thread-locking, gland, if used | |
| 7 | D95145 | WIPER SEAL,54.79mm ID x 70.09mm OD x 7.91mm W | WIPER - piston rod, outer | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105520 same as G34628 kit plus ref. 9A above | | |
| 8 | G102426 | BUSHING,57.15mm ID x 60.22mm OD x 37.85mm L | - Center | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105520 same as G34628 kit plus ref. 9A above | | |
| 9 | D39359 | RUBBER SEAL | U-CUP SEAL - piston rod, wide | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G100779 | | |
| | Part of seal kit P/N G105520 same as G34628 kit plus ref. 9A above | | |
| 9a | G103447 | RING | SEAL - piston rod, narrow, used in addtion to ref. 9 in some glands | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105520 same as G34628 kit plus ref. 9A above | | |
| 10 | A23316 | O-RING,0.139" Thk x 4.484" ID, -246, Cl 5, 75 Duro | - gland | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105520 same as G34628 kit plus ref. 9A above | | |
| 11 | G32284 | BACK-UP RING | BACKUP RING - gland O-ring | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105520 same as G34628 kit plus ref. 9A above | | |
| 12 | 187-1031 | SELF-TAP SCREW,Pan, 0.164"-32 x 1/4" | SCREW - self-tapping, No. 8 - 32 NC x 1/4", if used, not required when nylon plug is used | |
| 13 | G34024 | ROD | - piston, 2-1/4" (57 mm) diameter, Includes: Ref. 14 | |
| 14 | D38478 | BUSHING | - piston rod | |
| 15 | D46425 | PISTON | - split, rod end | |
| 16 | D46931 | PISTON | - split, bolt end | |
| 17 | D47205 | PACKING | - piston | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105520 same as G34628 kit plus ref. 9A above | | |
| 18 | D47210 | BEARING WASHER,82.58mm ID x 113.97mm OD x 19mm Thk | RING - packing | |
| 19 | 28-2044 | BOLT,Hex, 1-1/4" - 12 x 2-3/4", Gr 8 | - Hex, 1-1/4"-12 NF x 2-3/4", G8 | |
| 20 | G32351 | WASHER | - hardened | |
| 21 | 219-36 | LUBE NIPPLE,45 Degree Elbow, 1/8" - 27 NPTF | GREASE FITTING - 45 degree, 1/8" NPT, no longer used, replace with 219-1 straight grease fitting, ref. 22 | |
| 22 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | GREASE FITTING - straight, 1/8" NPT | |
| G105520 | GASKET KIT | KIT - seal, Includes Includes Refs. 7, 8, 9, 9A, 10, 11 and 17 and G34628 kit plus ref. 9A above | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| G100779 | SEAL | - rod, service option - severe heat or cold | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
