| № | Номер | Название | Опции | Альт |
|---|
| 1 | D44624 | FRAME - backhoe mounting, Includes: Ref. 2 - 7A | | |
| 2 | D33023 | BUSHING,51.02mm ID x 63.5mm OD x 50.8mm L | - upper, frame to swing tower | |
| 3 | D43508 | BUSHING | - lower, frame to swing tower | |
| 4 | D44613 | SPACER | WASHER - special, lower mounting | |
| 5 | D30756 | BUSHING,51.02mm ID x 63.5mm OD x 31.8mm L | - stabilizer leg mounting | |
| 6 | D34340 | BUSHING,44.68mm ID x 53.98mm OD x 25.4mm L | - stabilizer cylinder mounting | |
| 7 | D44625 | | BRACKET ASSEMBLY - frame mounting, Includes: Ref. 7A | |
| 7a | A19288 | BUSHING | - mounting, Serial Range: frame-chassis | |
| 8 | D43292 | SUPPORT ASSY. | LEG - stabilizer, R.H., Includes: Ref. 9 | |
| 9 | D43895 | CHAIN (AG) | CHAIN - transport | |
| 10 | D43291 | SUPPORT ASSY. | LEG - stabilizer, L.H., Includes: Ref. 11 | |
| 11 | D43895 | CHAIN (AG) | CHAIN - transport | |
| 12 | D26919 | SNAP RING,#200, Ext | Ring, Snap, , pin #200, Ext | |
| 13 | 195-2155 | WASHER,2 1/16" x 3" x .109" | - flat, steel (2-1/16") | |
| 14 | D45523 | PIN,50.8mm OD x 276.35mm L | - stabilizer to mounting frame | |
| 15 | REF | INSTRUCTION | CYLINDER - hydraulic, stabilizer (See Figures 212 and 214 for proper cylinder) | |
| 16 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , pin #175, Ext | |
| 17 | 195-2152 | WASHER,1 13/16" x 2 1/2" x .109" | - flat, steel (1-5/16") | |
| 18 | D37611 | PIVOT PIN,44.45mm OD x 255.59mm L | PIN - stabilizer cylinder, closed end | |
| 19 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , pin #175, Ext | |
| 20 | D42912 | AXLE PIN | PIN - stabilizer, cylinder, rod end | |
| 21 | D42767 | PAD | FOOT - stabilizer, cleated | |
| 22 | D26918 | SNAP RING,#125, Ext | Ring, Snap, , pin #125, Ext | |
| 23 | D42785 | AXLE PIN | PIN - stabilizer foot | |
| 24 | D43295 | | FOOT - stabilizer, street and cemetery pad (Optional) | |
| 25 | D40469 | SHOE (ASSY) | PAD - rubber. D43295 stabilizer foot (Optional) | |
| 26 | D29712 | SPECIAL NUT | - hex., special | |
| 27 | REF | INSTRUCTION | CYLINDER - hydraulic, R.H. swing (See Figures 220 and 222 for proper cylinder) | |
| 28 | REF | INSTRUCTION | cylinder - hydraulic, L.H. swing (See Figures 220 and 222 for proper cylinder) | |
| 29 | D48220 | PIN | - swing, Serial Range: cylinder-frame | |
| 30 | 13-828 | BOLT,Hex, 1/2" - 13 x 1-3/4", Gr 5 | HHCS - 1/2" - 13 NC x 1-3/4" | |
| 31 | 92-8 | LOCK WASHER,1/2" | med. sect. 1/2" | |
| 32 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight (1/8" NPT) Used on lower D48220 pins | |
| 32a | 219-39 | FITTING | - grease, 45 degrees (1/8" NPT) Used on upper D48220 pin (Not shown) | |
| 33 | D47866 | PIN,38.1mm OD x 139.7mm L | - swing cylinder to swing tower | |
| 34 | 13-1064 | BOLT,Hex, 5/8" - 11 x 4", Gr 5 | HHCS - 5/8" - 11 NC x 4" | |
| 35 | 92-10 | LOCK WASHER,5/8" | WASHER, LOCK, 5/8" | |
| 36 | 25-1010 | NUT,5/8"-11, G5 | | |
| 37 | L16783 | PIN | - mounting, backhoe mounting frame to chassis (Upper) Early production tear drop pin design (Order L40682 pin and L40681 washer for service) | |
| 38 | L40682 | AXLE PIN | PIN - mounting, backhoe mounting frame to chassis (Upper) Late production washer retaining pin design | |
| 39 | L16782 | PIN | - mounting, backhoe mounting frame to chassis (Lower) Early production tear drop pin design (Order L42611 pin and L40681 washer for service) | |
| 40 | L42611 | AXLE PIN | PIN - mounting, backhoe mounting frame to chassis (Lower) Late production washer retaining pin design | |
| 41 | L40681 | LOCK WASHER | -special, locking (Backhoe mounting pin) Used with L40682 and L42611 pins only | |
| 42 | 13-816 | BOLT,Hex, 1/2" - 13 x 1", Gr 5, Full Thd | | |
| 43 | 92-8 | LOCK WASHER,1/2" | med. sect. 1/2" | |
