| № | Номер | Название | Опции | Альт |
|---|
| 1 | G34836 | CYLINDER | ASSEMBLY - lift, right-hand, 5" (127 mm) diameter x 31-1/2" (800 mm) stroke, not shown, Includes: Ref. 3 - 21 | |
| 1 | G34837 | CYLINDER | ASSEMBLY - lift, left-hand, 5" (127 mm) diameter x 31-1/2" (800 mm) stroke, not shown, Includes: Ref. 3 - 21 | |
| 2 | G34838 | TUBE,40.99" L | - G34836 cylinder, Includes: Ref. 3 | |
| 2 | G34839 | TUBE | - G34837 cylinder, Includes: Ref. 3 | |
| 3 | D52579 | BUSHING,57.38mm ID x 69.85mm OD x 28.57mm L | - tube | |
| G34726 | GLAND | ASSEMBLY - cylinder, Includes: Ref. 5 - 11 | |
| 5 | NSS | NOT SOLD SEPARAT | GLAND - cylinder | |
| 5a | G120569 | PLUG - nylon, thread-locking, gland, if used | | |
| 6 | NSS | NOT SOLD SEPARAT | RETAINING RING - gland | |
| 7 | D95145 | WIPER SEAL,54.79mm ID x 70.09mm OD x 7.91mm W | WIPER - piston rod | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105530 same as G34752 kit plus ref. 9A above | | |
| 8 | G102426 | BUSHING,57.15mm ID x 60.22mm OD x 37.85mm L | - Center | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105530 same as G34752 kit plus ref. 9A above | | |
| 9 | D39359 | RUBBER SEAL | U-CUP SEAL - piston rod, wide | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105530 same as G34752 kit plus ref. 9A above | | |
| | Part of seal kit P/N G100779 | | |
| 9a | G103447 | RING | SEAL - piston rod, narrow, used in addition to Ref. 9 in some glands | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105530 same as G34752 kit plus ref. 9A above | | |
| 10 | 49393 | O-RING,4.734" ID x 5.012" OD x 0.139" | - gland | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105530 same as G34752 kit plus ref. 9A above | | |
| 11 | S92639 | RING | BACKUP RING - gland O-ring | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105530 same as G34752 kit plus ref. 9A above | | |
| 12 | 187-1031 | SELF-TAP SCREW,Pan, 0.164"-32 x 1/4" | SCREW - self-tapping, No. 8 - 32 NC x 1/4", if used, not required when nylin plug is used | |
| 13 | G34098 | ROD | - piston, 2-1/4" (57 mm) diameter, Includes: Ref. 14 | |
| 14 | D33024 | BUSHING,51.02mm ID x 63.5mm OD x 25.4mm L | - piston rod | |
| 15 | D46426 | PISTON | - split, rod end | |
| 16 | D48562 | PISTON,123.95mm Bore, 63.5mm Rod, 34.92mm W | - split, bolt end | |
| 17 | D47206 | PACKING | - piston | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| | Part of seal kit P/N G105530 same as G34752 kit plus ref. 9A above | | |
| 18 | D47211 | BEARING WASHER,95.28mm ID x 126.69mm OD x 19mm Thk | RING - center, packing | |
| 19 | 28-2052 | BOLT,Hex, 1-1/4" - 12 x 3-1/4", Gr 8 | - hex head, 1-1/4"-12 NF x 3-1/4", grade 8 | |
| 20 | G32351 | WASHER | - hardened | |
| 21 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | GREASE FITTING - straight, 1/8" NPT | |
| G105530 | SEAL | KIT - seal, Includes Refs. 7, 8, 9, 9A, 10, 11 and 17 same as G34752 kit plus ref. 9A above | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
| G100779 | SEAL | - rod, service option - severe heat or cold | |
| | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | |
