(8-008) - EQUIPMENT HYDRAULIC SYSTEM, OIL COOLER AND RETURN LINES

№	Номер	Название	Опции
1	A172097	COOLER, OIL	COOLER - oil, hydraulic system
2	814-8025	BOLT,Hex, M8 x 1.25 x 25mm, Cl 8.8, Full Thd	- hex head, 8 mm - 1.25 x 25 mm (8.8), plated
3	892-1108	LOCK WASHER,M8	plated M8
4	895-11008	WASHER,9mm ID x 16mm OD x 1.6mm Thk
5	218-5049	HYD CONNECTOR,1-7/8" - 12 Male JIC x 1-5/8" - 12 Male ORB	ADAPTER - straight, backhoe valve return port, lower, Includes: Ref. 6
6	237-6020	O-RING,0.118" Thk x 1.475" ID, -920, Cl 6, 90 Duro	20-1, 90 Duro, 1.475" ID x .118" Thk, Adapter
7	D141332	TUBE	- backhoe control valve return, models without extendable dipper
7	D141330	TUBE ASSY.	TUBE - backhoe control valve return, models with extendable dipper
7a	221-844	PLUG,Hex Soc, 1/2"-14	- hex socket head, 1/2" NPT, if used, not required on models with hydraulic boom lock, see Figure 8-46 or 8-48 for hose used in place of plug
8	L104115	TEE	- valve return tubes
9	218-5062	HYD CONNECTOR,7/8"-14, 37 Degree x 7/8"-14, O-Ring	CONNECTOR - straight, male, stabilizer valve return port, Includes: Ref. 10
10	237-6010	O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro	- connector
11	D141334	TUBE	- stabilizer control valve return
12	D141327	TUBE	- backhoe return
13	D47198	CLAMP	- return, Serial Range: tube-chassis
14	413-840	BOLT,Hex, 1/2" - 13 x 2-1/2", Gr 5	- hex, 1/2 NC x 2-1/2 inch
15	195-106	WASHER,1/2"	- flat, , plated 1/2"
15a	196-15	WASHER,17/32" x 1 1/6" x .134"	- flat, 1/2 inch, hardened
16	192-23	LOCK WASHER,1/2"	WASHER, LOCK, 1/2"
17	129-105	NUT,Hex, 1/2" - 13, Gr 5
18	D141697	HOSE	- 9" (229 mm) long, return, cut to required length from D129185 bulk hose, see below
19	S85429	CLAMP	- hose
20	D141582	CROSS	FITTING - four-way, used with D141336 tube, Ref. 30, if used
21	218-5117	ELBOW,90 Degree Elbow, 7/8" - 14 Male JIC x 3/4" - 16 Male ORB	- 90 degree, adjustable, from brake valve, Includes: Ref. 22
22	237-6008	O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro	8-1, 90 Duro, .644" ID x .087" Thk, Elbow
23	D141317	TUBE ASSY.	TUBE - brake valve to return line
24	218-5505	TEE,1 1/16"-12, 37º x 7/8"-14 x 1 1/16"-12, O-Ring Br	- adjustable, at backhoe relief valve, Includes: Ref. 25
25	237-6012	O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro	12-1, 90 Duro, .924 ID x .116" Thk, Tee
26	D138174	TUBE ASSY.	TUBE - backhoe relief valve to return line
27	218-5231	ELBOW,90 Degree, 1 1/16"-12, 37 Degree x 1 1/16"-12, 37 Degree Fem Sw	at four-way fitting 90º, 1 1/16"-12, 37º x 1 1/16"-12, 37º Fem Sw
28	218-5077	HYD CONNECTOR,1-1/16" - 12 Male JIC x 1-5/16" - 12 Male ORB	ADAPTER - straight, male, used with D141336 tube, Ref. 30, if used, Incl. Ref. 29
29	237-6016	O-RING,0.116" Thk x 1.171" ID, -916, Cl 6, 90 Duro	- adapter
30	D141336	TUBE	- crossover, from loader control valve, used with Ref. 20 and 28, if used
31	D141683	HOSE	- 71" (1800 mm) long, backhoe return to oil cooler
	D129185	HOSE,38.1 mm ID x 863.60 mm
32	217-157	FITTING,1-1/4" Hose Barb x 1-1/4" Male NPTF	- stem, straight
33	D135549	CLAMP	- hose
34	S98801	CLAMP	- return, Serial Range: hose-chassis
35	113-412	BOLT,Hex, 1/2" - 13 x 1-3/4", Gr 5
36	192-23	LOCK WASHER,1/2"	WASHER, LOCK, 1/2"
37	129-105	NUT,Hex, 1/2" - 13, Gr 5
38	D149336	TUBE ASSY.	TUBE - crossover, from loader control valve, used with Ref. 39 and 40, if used
39	D146717	TEE	- special, used with D149336 tube, Ref. 38, if used
40	218-5118	ELBOW,90 Degree Elbow, 1-1/16" - 12 Male JIC x 1-5/16" - 12 Male ORB	- 90 deg, 1-1/16-12 flare x 1-5/16-12 inch adj. O-ring, used with D149336 tube, Ref. 38
41	237-6016	O-RING,0.116" Thk x 1.171" ID, -916, Cl 6, 90 Duro	- 1-11/64 ID x 7/64 inch wide