| № | Номер | Название | Опции | Альт |
|---|
| 1 | REF | INSTRUCTION | VALVE ASSEMBLY - control, steering, for correct assembly and components, see figures 5-4 - 5-5C | | | 2 | 218-5378 | ELBOW,90 Degree, 7/8"-14, 37 Degree x 3/4"-16, 37 Degree Fem Sw | - 90 degree, 7/8-14 flare x 3/4-16 inch swivel | | | 3 | 218-5059 | HYD CONNECTOR,3/4"-16, 37 Degree x 3/4"-16, O-Ring | ADAPTER - straight, 3/4-16 inch flare x O-ring boss, Incl. Ref 4 | | | 4 | 237-6008 | O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro | 8-1, 90 Duro, .644" ID x .087" Thk | | | 5 | L124237 | HOSE | - 600 mm (23-5/8 inch) long, return, at control valve | | | 6 | 218-676 | FITTING,Blkhd, 1 1/16"-12, 37 Degree x 1 1/16"-12, 37 Degree | ADAPTER - straight, 1-1/16-12 inch flare x bulkhead flare | | | 7 | 218-1256 | BHD LOCK NUT,Blkhd, 1 1/16"-12 | NUT - hex, lock, bulkhead, 1-1/16 inch NF | | | 8 | L129938 | TUBE | TUBE - hose at oil cooler to, Serial Range: tube-filter | | | 9 | 114381A1 | TUBE,19.04 mm OD, 2004, 550 mm Length | - return, hose at steering control valve to hose at oil cooler, hose at steering control valve to hose at oil cooler | | | 10 | 515-25190 | CLAMP,3/4", Insul, 1/2" Bolt | P-type, Hydraulic oil tubes to rear frame 3/4", Insul, 1/2" Bolt | | | 11 | L119350 | SPACER | - clamp | | | 12 | 495-11041 | WASHER,0.406" ID x 0.812" OD x 0.065" W | (Flat, 13/32 x 13/16 x 1/16") 3/8", SAE | | | 13 | 231-1406 | LOCK NUT,3/8"-16, GB | NUT - hex, self-locking, 3/8 inch NC | | | 14 | L128077 | HOSE ASSY. | HOSE - 1000 mm (39-3/8 inch) long, supply, at oil cooler | | | 15 | L128078 | HOSE ASSY. | HOSE - 2142 mm ( 84-5/16 inch) long, return, at oil cooler | | | 16 | L127883 | OIL COOLER | COOLER - oil, hydraulic | | | 17 | L128214 | THUMB SCREW | SCREW - thumb, special, 3/8 NC x 1 inch | | | 18 | 492-11038 | LOCK WASHER,3/8" | | | | 19 | 495-11041 | WASHER,0.406" ID x 0.812" OD x 0.065" W | (Flat, 13/32 x 13/16 x 1/16") 3/8", SAE | | | 20 | L128083 | SUPPORT | BRACKET - hinge, oil cooler | | | 21 | 424-6160 | BOLT,Hex, 3/8" - 16 x 10", Gr 2 | - hex, 3/8 NC x 10 inch, grade 2 | | | 22 | 426-616 | BOLT,Hex, 3/8" - 16 x 1", Gr 8 | | | | 23 | 231-1446 | NUT,3/8" - 16, Gr 5 | NUT - hex, self-locking, 3/8 inch NC | | | 24 | 515-23270 | CLAMP,1 1/16", Insul, 3/8" Bolt | - P-type, 1-1/16 inch ID, hose, replaces R56681 | | | 25 | 426-612 | BOLT,Hex, 3/8" - 16 x 3/4", Gr 8 | - hex, 3/8 NC x 3/4 inch, grade 8 | | | 26 | S95569 | WASHER | - flat, special, 1/2 inch | | | 27 | L59005 | SPACER | - lower clamp | | | 28 | L127370 | HOSE | - 550 mm (21-11/16 inch) long, filter tube to tube at flow control valve | | | 29 | 218-5231 | ELBOW,90 Degree, 1 1/16"-12, 37 Degree x 1 1/16"-12, 37 Degree Fem Sw | - 90 degree, 1-1/16-12 inch flare x swivel | | | 30 | 218-5065 | HYD CONNECTOR,1-1/16" - 12 Male JIC x 7/8" - 14 Male ORB | ADAPTER - straight, 1-1/16-12 flare x 7/8-14 inch O-ring boss, Includes: Ref. 31 | | | 31 | 237-6008 | O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro | 8-1, 90 Duro, .644" ID x .087" Thk | | | 32 | 218-5220 | TEE,37 Degree, 7/8"-14 x 7/8"-14, Fem Sw Run | - swivel, 7/8-14 inch flare branch x flare x adj. straight thread | | | 33 | 218-5174 | ELBOW,45 Degree Elbow, 7/8" - 14 Male JIC x 7/8" - 14 Female JIC | - 45 degree, 7/8-14 inch flare x swivel | | | 34 | 832-10410 | NUT,M10 x 1.5, Cl 8 | NUT, LOCK, , Not shown M10 x 1.5, Cl 8 | | | 35 | 896-11010 | WASHER,11mm ID x 21mm OD x 2.5mm Thk | Not shown M10 x 21.5 x 2.5, HT | |
|
|