| № | Номер | Название | Опции | Альт |
|---|
| D146847 | AXLE | ASSEMBLY front drive, Carraro No. 126140, parts list Figures 6-42 - 6-58, no longer available, order D149673 axle | |
| D149673 | AXLE | ASSEMBLY front drive, Carraro No. 127085, parts list Figures 6-42 - 6-58, does not include hydraulic fittings at steering cylinder, Ref. 4 and 16 on Figure 6-38, purchase separately, if used | |
| 127767A1 | AXLE | ASSEMBLY front drive, Carraro No. CAV91-767, parts list Figures 6-42 - 6-60, includes hydraulic fittings at steering cylinder, Ref. 4 and 16 on Figure 6-38, replaces 109937A1 axle, if used, Includes: Ref. 1 through 22 | |
| | 108762A1 is a cab frame made up of 108532A1 frame, 151-525 Rivet, and 1990696C2 S/N and model plate. This is part of D104066 complete cab which is no longer available through whole goods. Dealer needs to order the 108762A1 frame and all other primes seperately and build up the cab complete. This frame will fit the 580K-I, 580K-III, and 580 Super K. | | |
| 1 | D150204 | HOUSING | swivel, right-hand, replaces N14375 housing | |
| 2 | D150203 | HOUSING | swivel, left-hand, replaces N14374 housing | |
| 3 | F3333050 | SCREW | BOLT, 14 mm, steering stop, special, replaces D142907 | |
| 4 | K395148 | NUT | hex, 14 mm, special, replaces D142908 nut | |
| 5 | 1967535C1 | BUSHING | swivel housing, replaces K395033 bushing | |
| 6 | K262143 | OIL SEAL,16mm W, 35mm ID x 52mm OD | oil, swivel housing | |
| 8 | N14372 | BUSHING | BEARING swivel cap, upper | |
| | If swivel housing has a two-piece upper bearing, you must order both N14372 upper bearing and N14376 upper king pin. | | |
| 9 | N14373 | SPHERICAL BEARING,28mm ID x 52mm OD x 16mm W | BEARING swivel cap, lower, two-piece bearing | |
| 10 | K395039 | SEAL | bearing | |
| | Used on axles prior to Carraro serial number CAR/4253. | | |
| 11 | K395036 | SHIM,52mm ID x 116mm OD x 0.1mm Thk | Swivel cap 0.10mm Thk | |
| | Used on axles prior to Carraro serial number CAR/4253. | | |
| 11 | K395037 | SHIM,52mm ID x 98mm OD x 0.19mm Thk | Swivel cap 0.19mm Thk | |
| | Used on axles prior to Carraro serial number CAR/4253. | | |
| 11 | K395038 | SHIM,52mm ID x 98mm OD x 0.35mm Thk | Swivel cap 0.35mm Thk | |
| | Used on axles prior to Carraro serial number CAR/4253. | | |
| 12 | N14376 | PIN | PIN king, swivel housing cap, upper | |
| | If swivel housing has a two-piece upper bearing, you must order both N14372 upper bearing and N14376 upper king pin. | | |
| | Used on axles prior to Carraro serial number CAR/4253. | | |
| 13 | N13504 | PIVOT | PIN king, swivel housing cap, lower | |
| | Used on axles prior to Carraro serial number CAR/4253. | | |
| 14 | K965247 | BOLT,M14 x 35mm | BOLT hex head, 14 - 2 x 35 mm, special, used with Ref. 15 lock washer, if used | |
| 15 | K965248 | WASHER | lock, 14 mm, special, not required with Ref. 17 bolt, if used | |
| 16 | 321204 | LUBE NIPPLE,M6 x 1.0 x 16mm OAL | NIPPLE, LUBE, , Swivel cap, Replaces K965246 fitting M6 x 1, 16mm lg | |
| 17 | D150214 | BOLT,Lock, Hex, M14 x 2 x 35mm, Cl 10.9 | BOLT hex, self-locking, 14 - 2 x 35 mm, special, if used | |
| 18 | 122260A1 | PIVOT | PIN king, swivel housing cap, upper | |
| | Used on axles Carraro serial number CAR/4253 and after. | | |
| 19 | 122262A1 | BELLEVILLE WASHER | Belleville, upper | |
| | Used on axles Carraro serial number CAR/4253 and after. | | |
| 20 | 144611A1 | SHIM | SPACER bearing to upper king pin | |
| | Used on axles Carraro serial number CAR/4253 and after. | | |
| 21 | 122261A1 | BELLEVILLE WASHER,47.5mm ID x 70mm OD x 2mm Th | Belleville, lower | |
| | Used on axles Carraro serial number CAR/4253 and after. | | |
| 22 | 122259A1 | PIVOT,120mm OD, 15mm ID, 5mm L | PIN king, swivel housing cap, lower | |
| | Used on axles Carraro serial number CAR/4253 and after. | | |
| M20704 | ADHESIVE | SEALANT, 3 oz, 89 ml, of sealant in a tube, wear ring to swivel housing, not shown, order B17575 | |
