| № | Номер | Название | Опции | Альт |
|---|
| 1 | REF | INSTRUCTION | VALVE ASSEMBLY - control, steering, for correct assembly and components, see figures 5-4 - 5-5C | | | 2 | 218-5066 | HYD CONNECTOR,7/8" - 14 Male JIC x 3/4" - 16 Male ORB | CONNECTOR, HYD., straight, 7/8-14 flare x 3/4-16 inch O-ring boss, Incl. Ref. 3 | | | 3 | 237-6008 | O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro | 8-1, 90 Duro, .644" ID x .087" Thk | | | 4 | 218-5232 | ELBOW,90 Degree, 7/8"-14, 37 Degree x 7/8"-14, 37 Degree Fem Sw | - 90 degree, 7/8-14 inch flare x swivel | | | 5 | 112371A1 | HOSE ASSY. | HOSE - 845 mm (33-1/4 inch) long, control, Serial Range: valve-tube | | | 6 | S45067 | CLAMP | - tube | | | 7 | 426-628 | BOLT,Hex, 3/8" - 16 x 1-3/4", Gr 8 | - hex, 3/8 NC x 1-3/4 inch, grade 8 | | | 8 | 231-1406 | LOCK NUT,3/8"-16, GB | NUT - hex, self-locking, 3/8 inch NC | | | 9 | 112372A1 | TUBE | - left-hand, from hose at control valve lower port | | | 10 | 112375A1 | TUBE | - right-hand, from hose at control valve upper port | | | 11 | A13622 | PLATE, LOCKING | CLAMP - tube | | | 12 | 426-628 | BOLT,Hex, 3/8" - 16 x 1-3/4", Gr 8 | - hex, 3/8 NC x 1-3/4 inch, grade 8 | | | 13 | 231-1406 | LOCK NUT,3/8"-16, GB | NUT - hex, self-locking, 3/8 inch NC | | | 14 | L124234 | HOSE | - 650 mm (25-5/8 inch) long, Serial Range: tube-tube | | | 15 | L118907 | PIPE ASSY.,15.87 mm OD | TUBE - steering, with tee | | | 16 | L127794 | PIPE,12.7 mm OD x 520 mm L | TUBE - steering, crossover | | | 17 | 218-5230 | ELBOW,90 Degree, 3/4"-16, 37 Degree x 3/4"-16, 37 Degree Fem Sw | - 90 degree, 3/4-16 inch flare x swivel | | | 18 | 218-474 | ELBOW,90 Degree Elbow, 3/4" - 16 Male JIC x 3/4" - 16 Male JIC | | | | 19 | L127792 | HOSE | - 586 mm (23 inch) long, tube to cylinder, rod end, Includes: Ref. 20 | | | 21 | R15257 | CLAMP | - tube | | | 22 | 426-624 | BOLT,Hex, 3/8" - 16 x 1-1/2", Gr 8 | - hex, 3/8 NC x 1-1/2 inch, grade 8 | | | 23 | 495-11041 | WASHER,0.406" ID x 0.812" OD x 0.065" W | (Flat, 13/32 x 13/16 x 1/16") 3/8", SAE | | | 24 | 231-1406 | LOCK NUT,3/8"-16, GB | NUT - hex, self-locking, 3/8 inch NC | | | 25 | L124236 | HOSE | - 700 mm (27-9/16 inch) long, tube to cylinder, closed end, Includes: Ref. 26 | | | 27 | L118924 | PIPE,12.7 mm OD | TUBE - steering, upper left-hand, to closed end of cylinder | | | 28 | L128335 | PIPE,12.7 mm OD x 552, 496 mm L | TUBE - steering, lower right-hand, to closed end of cylinder | | | 29 | L78949 | U-BOLT | - 5/16 inch NC | | | 30 | 495-21038 | WASHER,5/16" | (flat, 3/8 x 7/8 x 3/32") 5/16" | | | 31 | 231-1445 | NUT,5/16"-18, GB | NUT - hex, self-locking, 5/16 inch NC | | | 32 | 1976862C1 | STEERING CYLINDER | CYLINDER ASSEMBLY - 44 (1-3/4) ID x 435 mm (17-1/8 inch) stroke, parts list figure 5-20 | | | 84311413R | REMAN-HYD CYLINDER | 721B (3/93-12/98), Reman for New P/N 1976862C1 | | | 84311413C | CORE-HYD CYLINDER | Return Number | | | 33 | L126418 | PIN,38mm OD x 111mm L | - mounting, cylinder, if non-rotating pin mating surface of cylinder becomes worn, order Ref. 48 or 49 shown below | | | 34 | 326-824 | BOLT,Hex, 1/2" - 13 x 1-1/2", Gr 8 | | | | 35 | R17756 | ROD,12.7mm OD x 109.54mm L | PIN - retaining, mounting pin | | | 36 | S109722 | WASHER,38.1mm ID x 76.2mm OD x 3.17mm Thk | - flat, 1-1/2 x 3 x 1/8 inch, nylon | | | 37 | G109152 | SPHERICAL BEARING,34.92mm ID x 55.56mm OD x 30.15mm W | - self-aligning | | | 38 | 102-23218 | SNAP RING,#218, 2.321", Int, Spiral | RING - internal spiral retaining, No. 218, bushing | | | 39 | 326-860 | BOLT,Hex, 1/2" - 13 x 3-3/4", Gr 8 | | | | 40 | 131-1402 | THIN NUT,1/2"-13, GB, Thin | NUT, LOCK, 1/2"-13, GB, Thin | | | 41 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight, 1/8 PT x 21/32 inch, two replace existing plugs on closed end of cylinders | | | 42 | 218-5059 | HYD CONNECTOR,3/4"-16, 37 Degree x 3/4"-16, O-Ring | ADAPTER - straight, 3/4-16 inch flare x O-ring boss, Incl. Ref 43 | | | 43 | 237-6008 | O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro | 8-1, 90 Duro, .644" ID x .087" Thk | | | 44 | 218-5378 | ELBOW,90 Degree, 7/8"-14, 37 Degree x 3/4"-16, 37 Degree Fem Sw | - 90 degree, 7/8-14 flare x 3/4-16 inch swivel | | | 45 | 515-23254 | CLAMP,1", Insul, 3/8" Bolt | P-type, Mounts to cab floor channel 1", Insul, 3/8" Bolt | | | 46 | 495-11041 | WASHER,0.406" ID x 0.812" OD x 0.065" W | (Flat, 13/32 x 13/16 x 1/16") 3/8", SAE | | | 47 | 231-1406 | LOCK NUT,3/8"-16, GB | NUT - hex, self-locking, 3/8 inch NC | | | 48 | 187151A1 | PIN,34.92mm OD x 144mm L | KIT - pin expander, if used, replaces Ref. 33 on closed end of cylinder | | | 49 | 193946A1 | PIN | KIT - pin expander, if used, replaces Ref. 33 on rod end of cylinder | | | 20 | 237-6006 | O-RING,0.078" Thk x 0.468" ID, -906, Cl 6, 90 Duro | 6-1, 90 Duro, .468" ID x .078" Thk | | | 26 | 237-6006 | O-RING,0.078" Thk x 0.468" ID, -906, Cl 6, 90 Duro | 6-1, 90 Duro, .468" ID x .078" Thk | |
|
|