(2-12) - RADIATOR, FAN, AND MOUNTING PARTS

№	Номер	Название	Опции
1	A172138	RADIATOR	engine cooling
2	A170241	RADIATOR CAP	Filler, 15 psi, Includes: Ref. 3
3	D128680	BAFFLE	26-3/4" (680 mm) long, radiator, side, cut to fit from D92228 bulk, see below
4	A171622	SHROUD	radiator
5	L110807	HOSE,44.40 mm ID x 309.90 mm, SAE 20R4 Class C or D-1	(Replaces D144202)
6	214-259	HOSE CLAMP,#32, 1.56" - 2.5", Type F Worm	upper radiator
7	D144202	HOSE,2.25" ID x 10.75", SAE J20, SAE 20R4 CLASS C or SAE 20R4 CLASS D1 or D2	Lower
8	214-262	HOSE CLAMP,#44, 2.31" - 3.25", Type F Worm	lower radiator
9	A27862	COCK, DRAIN	VALVE - radiator
10	L60451	HOSE	1/4" (6 mm) ID x 27" (686 mm) long, drain, cut to required length from H400184 hose, if used, see below
11	A171580	FAN	suction, has 50 mm bolt circle, reference Figure 2-26 (Ref. 10 pulley), if used
12	A172592	SPACER	fan, use with Ref. 11, A171580 fan, and Ref. 13, 827-8100 bolt
13	827-8110	BOLT,Hex, M8 x 1.25 x 110mm, Cl 10.9	with Ref. 11, A171580 fan and Ref. 12, A172592 spacer
14	196-1	WASHER,13/32" x 13/16" x .089", HDN	flat, 3/8", hardened, plated
15	J903099	V-BELT,3.56 mm W x 1574.80 mm L, 8 Ribs	Fan and Alternator
	D129916	BELT,12.70 mm W x 1124.00 mm L	Brake, Air Compressor Drive, Not Shown, See Figure 7-216 (Ref. 13)
16	L113305	SUPPORT ASSY.	SPARE PART radiator
17	814-8025	BOLT,Hex, M8 x 1.25 x 25mm, Cl 8.8, Full Thd
18	892-1108	LOCK WASHER,M8
19	895-11008	WASHER,9mm ID x 16mm OD x 1.6mm Thk
20	L113306	BRACKET	SPARE PART radiator support
21	80087972	BOLT,Hex, 1/2" - 13 x 2 1/2", Gr 5
22	195-106	WASHER,1/2"
23	195-2055	WASHER,17/32" x 2 1/4" x .180"	flat, 1/2", special, plated
24	L46821	SHOCK ABSORBER	radiator mounting
25	192-23	LOCK WASHER,1/2"
26	129-105	NUT,Hex, 1/2" - 13, Gr 5
27	113-209	BOLT,Hex, 3/8" - 16 x 1-1/2", Gr 5
28	195-104	WASHER,3/8"
28a	196-5	WASHER,13/32" x 1 1/16" x .095", HDN	flat, 3/8", hardened, plated
29	192-21	LOCK WASHER,3/8"
30	129-103	NUT,Hex, 3/8" - 16, Gr 5
31	L111260	STRAP	radiator mounting
32	814-8020	BOLT,Hex, M8 x 1.25 x 20mm, Cl 8.8, Full Thd
33	892-1108	LOCK WASHER,M8
	345-44	ADHESIVE	spray can, for attaching foam pads to metal surface, not shown
	D92228	BAFFLE	bulk pad, 35-1/2" (900 mm) x 55-1/8" (1400 mm) x 1-1/2" (38 mm), use to cut Ref. 3, not shown
	H400184	FUEL HOSE,6.35 mm ID x 1905.00 mm, SAE 30R1, SAE 30R3	Cut from Bulk Hose
34	195-103	WASHER,5/16"
35	113-208	BOLT,Hex, 3/8" - 16 x 1-1/4", Gr 5
36	195-104	WASHER,3/8"
37	192-21	LOCK WASHER,3/8"
38	129-103	NUT,Hex, 3/8" - 16, Gr 5
39	L112140	HOSE,0.31" ID x 70.00", SAE 30R6	radiator to reservoir
40	A171099	HOSE CLAMP,13.2mm - 15.4mm
41	515-23143	CLAMP,9/16", Insul, 3/8" Bolt	P-type, hose to radiator shroud
42	A171871	HOSE,7.50 mm ID, 8.30 mm ID x 600.00 mm, SAE J30	Coolant overflow
43	A171773	CONTAINER	coolant recovery bottle
44	A171775	CAP	screw-on, reservoir, no longer available, order A184079 cap
44a	A184079	CAP	tether, reservoir
45	113-104	BOLT,Hex, 5/16" - 18 x 1-1/4", Gr 5
46	196-2	WASHER,3/8" x 7/8" x .083", HDN	SPARE PART flat, 5/16", hardened, plated
47	195-103	WASHER,5/16"
48	192-20	LOCK WASHER,Helical Spring, 0.318" ID, CST, ZND
49	9635082	NUT,5/16" - 18, Gr 5
50	515-23143	CLAMP,9/16", Insul, 3/8" Bolt	P-type
51	113-208	BOLT,Hex, 3/8" - 16 x 1-1/4", Gr 5
52	196-5	WASHER,13/32" x 1 1/16" x .095", HDN	flat, 3/8", hardened, plated
53	192-21	LOCK WASHER,3/8"
54	129-103	NUT,Hex, 3/8" - 16, Gr 5
55	217-134	ELBOW,90 Degree Elbow, 5/8" Hose Barb x 1/2" Male NPTF	stem
56	R40427	HOSE - 5/8" (16 mm) ID x 5-1/2 ft (167.6 cm) long, cut to required length from A42610 hose, Serial Range: engine-radiator
57	217-153	FITTING,5/8" Hose Barb x 1/2" Male NPTF	stem, straight
58	214-253	HOSE CLAMP,#10, 0.56" - 1.06", Type F Worm	engine to radiator hose
59	L18337	CABLE TIE,9.95"-12.1" lg	CABLE STRAP tie, 15 inch, nylon
60	R14668	CLAMP	, Serial Range: hose-shroud
61	814-8020	BOLT,Hex, M8 x 1.25 x 20mm, Cl 8.8, Full Thd
62	892-1108	LOCK WASHER,M8
63	195-103	WASHER,5/16"
64	814-8025	BOLT,Hex, M8 x 1.25 x 25mm, Cl 8.8, Full Thd
65	A173559	FAN	suction, has 60 mm bolt circle, reference Figure 2-27 (Ref. 10 pulley), if used
66	A184524	SPACER	fan, use with Ref. 65, A173559 fan and Ref. 67, 814-10110 bolt
67	814-10110	BOLT,Hex, M10 x 1.5 x 110mm, Cl 8.8	Use with Ref. 65, A173559 fan and Ref. 66, A184524 spacer
	A42610	LARGE HOSE	HOSE,LARGE bulk, 5/8" (16 mm) ID x 50 ft (1524 cm) long