| № | Номер | Название | Опции | Альт |
|---|
| 1 | D146847 | AXLE | ASSEMBLY front drive, Carraro No. 126140, parts list Figures 6-42 - 6-58, no longer available, order D149673 axle | | | 1a | D149673 | AXLE | ASSEMBLY front drive, Carraro No. 127085, parts list Figures 6-42 - 6-58, does not include hydraulic fittings at steering cylinder, Ref. 4 and 16, purchase separately, if used | | | 1b | 127767A1 | AXLE | ASSEMBLY front drive, Carraro No. CAV91-767, parts list Figures 6-42 - 6-60, includes hydraulic fittings at steering cylinder, Ref. 4 and 16, replaces 109937A1 axle, if used | | | 2 | K395089 | WHEEL NUT | hex | | | 3 | 496-81000 | WASHER,25/32" x 1 3/8" x .134", HDN | flat, 25/32 x 1-3/8 x 1/8 inch, hardened | | | 4 | 218-5280 | ELBOW,90 Degree, 3/4"-16, 37 Degree x 9/16"-18, O-Ring | 90 degree, 3/4-16 flare x 9/16-18 inch adj O-ring, Includes: Ref. 5 | | | 6 | D127445 | PIVOT PIN,50mm OD x 444mm L | SHAFT axle pivot | | | 7 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING grease, straight, 1/8 PT x 21/32 inch | | | 8 | 800-44050 | SNAP RING,M50, Ext | RING snap, shaft retaining, front | | | 9 | 495-81282 | WASHER,2 1/16" x 3" x .109" | flat, 2-1/16 x 3 x 1/8 inch | | | 10 | D143408 | WASHER,51.56mm ID x 101.6mm OD x 1.98mm Thk | flat, 2-1/32 ID x 4 OD x 1/16 inch thick, special | | | 11 | D123684 | WASHER,52.3mm ID x 114mm OD x 4.78mm Thk | thrust, 2-1/16 x 4-1/2 x 3/16 inch | | | 12 | D143431 | WASHER | special | | | 13 | 495-81226 | WASHER,46.02mm ID x 63.5mm OD x 3.35mm Thk | - flat, 1-13/16 x 2-1/2 x 1/8 inch | | | 14 | 103-16175 | SNAP RING,#175, Ext | Ring, Snap, , Pivot shaft, rear (Replaces D25280) #175, Ext | | | 15 | 1349244C1 | SHAFT | ASSEMBLY drive, front drive axle, parts list Figure 6-40 | | | 16 | 218-5351 | HYD CONNECTOR,3/4"-16, 37 Degree x 9/16"-18, O-Ring | ADAPTER straight, 3/4-16 flare x 9/16-18 inch O-ring boss, Includes: Ref. 17 | | | 18 | 806-10030 | BOLT,Hex, M10 x 1.5 x 30mm, Cl 10.9 | hex, 10 mm - 1.5 x 30 mm, special, flange mounting | | | 19 | D149468 | GUARD | drive shaft, 10 mm, 3/8 inch, thick, used on four wheel drive models without PTO and with Ref. 23, D149465, strap, no longer available, order Ref. 19A, 104658A1, guard | | | 19a | 104658A1 | GUARD | drive shaft, used on four wheel drive models without PTO, not shown, is identical to Ref. 19 except there are no holes in side bars | | | 20 | 413-1640 | BOLT,Hex, 1" - 8 x 2-1/2", Gr 5 | | | | 21 | 495-11106 | WASHER,1", SAE | flat, 1-1/16 x 2 x 1/8 inch | | | 22 | 425-1016 | NUT,1"-8, G5 | - hex, 1 inch NC | | | 23 | D149465 | BAR | STRAP shaft guard, used with Ref. 19, D149468 guard | | | 24 | 413-1232 | BOLT,Hex, 3/4" - 10 x 2", Gr 5 | hex, 3/4 NC x 2 inch, If used | | | 25 | 495-11081 | WASHER,3/4", SAE | If used 3/4", SAE | | | 26 | 425-1012 | NUT,3/4"-10, G5 | hex, 3/4 inch NC, if used | | | 27 | D151103 | GUARD | drive shaft, used on two wheel drive and four wheel drive models with PTO, replaces D149594 | | | 28 | 413-1640 | BOLT,Hex, 1" - 8 x 2-1/2", Gr 5 | | | | 29 | 495-11106 | WASHER,1", SAE | flat, 1-1/16 x 2 x 1/8 inch | | | 30 | 425-1016 | NUT,1"-8, G5 | - hex, 1 inch NC | | | 31 | D149593 | STRAP | shaft guard, used with Ref. 27, D151103 guard | | | 32 | 413-1232 | BOLT,Hex, 3/4" - 10 x 2", Gr 5 | hex, 3/4 NC x 2 inch | | | 33 | 495-11081 | WASHER,3/4", SAE | | | | 34 | 425-1012 | NUT,3/4"-10, G5 | hex, 3/4 inch NC | | | 5 | 237-6006 | O-RING,0.078" Thk x 0.468" ID, -906, Cl 6, 90 Duro | 6-1, 90 Duro, .468" ID x .078" Thk | | | 17 | 237-6006 | O-RING,0.078" Thk x 0.468" ID, -906, Cl 6, 90 Duro | 6-1, 90 Duro, .468" ID x .078" Thk | |
|
|