| № | Номер | Название | Опции | Альт |
|---|
| 1 | D34545 | FRAME | AND COWL - loader, Includes: Ref.#2 | |
| 2 | D33023 | BUSHING,51.02mm ID x 63.5mm OD x 50.8mm L | - cowl and upright | |
| 3 | D34652 | PANEL ASSY. | DASH - loader | |
| 4 | 13-612 | BOLT,Hex, 3/8" - 16 x 3/4", Gr 5, Full Thd | | |
| 5 | 92-6 | LOCK WASHER,3/8" | WASHER - lock, 3/8" | |
| 6 | D34663 | CLAMP | - mounting, cowl and frame | |
| 7 | D33982 | BUSHING | SPACER - clamp | |
| 8 | 13-1480 | BOLT,Hex, 7/8" - 9 x 5", Gr 5 | | |
| 9 | 13-14120 | BOLT,Hex, 7/8" - 9 x 7-1/2", Gr 5 | HHCS - 7/8" - 9 NC x 7-1/2" | |
| 10 | D34667 | WASHER,23.02mm ID x 38.1mm OD x 3.57mm Thk | - special (7/8") | |
| 11 | 230-41114 | LOCK NUT,7/8"-9, GA | NUT - self - locking, 7/8" - 9 NC | |
| 12 | D43589 | | ARM - lift. loader, Includes: Ref.#13 - 17, Serial Range: -3056521 | |
| 12 | R34351 | ARM ASSY. | ARM - lift. loader, Includes: Ref.#13 - 17, Start Serial: 3056521 | |
| 13 | D34506 | BUSHING,51.02mm ID x 63.5mm OD x 63.5mm L | - D43589 and R34351 arm, rear pivot | |
| 14 | D30929 | BUSHING,38.33mm ID x 47.63mm OD x 38.1mm L | - D43589 and R34351 arm, hydra-leveling and dump cylinder pivot (Replaces D34929) | |
| 15 | D30931 | BUSHING,38.33mm ID x 47.63mm OD x 69.85mm L | - D43589 and R34351 arm, dump link pivot | |
| 16 | D34354 | BUSHING,44.68mm ID x 53.98mm OD x 38.1mm L | - D43589 and R34351 arm, lift cylinder pivot | |
| 17 | D31142 | BUSHING,51.02mm ID x 63.5mm OD x 38.1mm L | - D43589 and R34351 arm, bucket pivot | |
| 18 | D34659 | PIN | ROD - pivot, lift arm | |
| 19 | D34668 | WASHER,52.39mm ID x 76.2mm OD x 3.57mm Thk | - special | |
| 20 | D34664 | RING | - retaining | |
| 21 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - straight grease (1/8" NPT) | |
| 22 | REF | INSTRUCTION | CYLINDER - lift, R.H. (See Fig. 336 for proper cylinders) | |
| 23 | REF | INSTRUCTION | CYLINDER - lift, L.H. (See Fig. 336 for proper cylinders) | |
| 24 | D34658 | PIN,44.45mm OD x 101.6mm L | - mounting | |
| 25 | D25280 | SNAP RING,#175, Ext | Ring, Snap, #175, Ext | |
| 26 | D34660 | PIN | - mounting | |
| 27 | D34661 | PIN | - mounting | |
| 28 | D34662 | BLOCK | - retaining | |
| 29 | 13-820 | BOLT,Hex, 1/2" - 13 x 1-1/4", Gr 5, Full Thd | | |
| 30 | 92-8 | LOCK WASHER,1/2" | | |
| 31 | REF | INSTRUCTION | CYLINDER - hydra-leveling (See Fig. 336 for proper cyls.) | |
| 32 | D34656 | PIN,38.1mm OD x 101.6mm L | - mounting | |
| 33 | D25279 | SNAP RING,M35, Int | RING - retaining | |
| 34 | D34642 | LINK | - inner, L.H., Includes: Ref.#35 | |
| 35 | D31512 | BUSHING,47.75mm ID x 57.15mm OD x 19.05mm L | - inner link | |
| 36 | D34647 | LINK | - outer, L.H., Includes: Ref.#37 | |
| 37 | D31512 | BUSHING,47.75mm ID x 57.15mm OD x 19.05mm L | - outer link | |
| 38 | D44628 | LINK | - inner, R.H. (For models before tractor serial no. 3038739, order 1 - D45566 kit for service when ordering D44628 link), Includes: Ref.#39 | |
| 39 | D31512 | BUSHING,47.75mm ID x 57.15mm OD x 19.05mm L | - inner link | |
| 40 | L13698 | | LINK - outer, R.H. (Models with return-to-dig before tractor sn. 3048752) | |
| 40 | R24222 | LINK | - outer, R.H. (Models with return-to-dig tractor sn. 3048752 thru 3056521) | |
| 40 | R30524 | | LINK - outer, R.H. (Models with return-to-dig feature), Includes: Ref.#41, Start Serial: 3056521 | |
| 41 | D31512 | BUSHING,47.75mm ID x 57.15mm OD x 19.05mm L | - D34647, L13698, R24222 and R30524 links | |
| 42 | 230-41112 | LOCK NUT,3/4"-10, GA | NUT - lock, hex (3/4" - 10 NC) | |
| | Pin in lower hole of dump links ( Nut Ref.# 42 attaches to) is D34644. | | |
| 43 | 13-12104 | BOLT,Hex, 3/4" - 10 x 6-1/2", Gr 5 | HHCS - 3/4" - 10 NC x 6-1/2" | |
| 44 | D34653 | PIN | - pivot, dump link | |
| 45 | 230-41112 | LOCK NUT,3/4"-10, GA | NUT - lock, hex. (3/4" - 10 NC) | |
| 46 | REF | INSTRUCTION | CYLINDER - dump, R.H. (See Fig. 336 for proper cyls.) | |
| 47 | REF | INSTRUCTION | CYLINDER - dump, L.H. (See Fig. 336 for proper cyls.) | |
| 48 | D34656 | PIN,38.1mm OD x 101.6mm L | - mounting | |
| 49 | D25279 | SNAP RING,M35, Int | RING - retaining | |
| 50 | D34651 | LINK | - dump, R.H., Includes: Ref.#51 & 52 | |
| 51 | D31140 | BUSHING,38.33mm ID x 47.63mm OD x 25.4mm L | - dump link (Rear) | |
| 52 | D30929 | BUSHING,38.33mm ID x 47.63mm OD x 38.1mm L | - dump, link (Front) | |
| 53 | D34650 | LINK | - dump, L.H., Includes: Ref.# 54 & 55 | |
| 54 | D31140 | BUSHING,38.33mm ID x 47.63mm OD x 25.4mm L | - dump link (Rear) | |
| 55 | D30929 | BUSHING,38.33mm ID x 47.63mm OD x 38.1mm L | - dump link (Front) | |
| 56 | 219-55 | LUBE NIPPLE,90 Degree Elbow, 1/8" - 27 NPTF | NIPPLE, LUBE, 90º, 1/8" NPT x .84" lg | |
| 57 | D34655 | PIN,50.8mm OD x 111.13mm L | - mounting | |
| 58 | D26919 | SNAP RING,#200, Ext | RING, Snap, #200, Ext | |
| 59 | D34654 | PIN | - mounting | |
| 60 | D25279 | SNAP RING,M35, Int | RING - retaining | |
| 61 | REF | INSTRUCTION | BUCKET - loader, parts list Fig. 228 | |
| 62 | D39304 | DECAL | - clam bucket position | |
| 63 | D39314 | BAND | BRACKET - indicator, clam bucket position | |
| 64 | D39315 | PIN | POINTER - indicator, clam bucket position | |
