2 FOOT (6.5 M) MAST FOR 585C

№	Номер	Название	Опции
	D18787	MAST - complete, machinery item, see Figure 2 for ordering, Includes: Ref. 1 - 62
1	D75939		FRAME - outer, Includes: Ref. 2 - 3B
2	D55411	STRIP	WEAR PLATE - 1/8" thick x 6" (3 mm x 152 mm)
3	D55409	STRIP	WEAR PLATE - 3/16" x 6" (5 mm x 152 mm)
3a	D47895	WEAR PAD	WEAR PLATE - 5/16" x 4-1/2" (8 mm x 114 mm)
3b	D40843	BUSHING,25.4mm ID x 38.1mm OD x 24.38mm L	BEARING - self-aligning
4	113-353	BOLT,Hex, 7/16" - 14 x 6", Gr 5	7/16"-14 x 6", G5
5	231-1447	NUT,7/16"-14, GB	NUT, LOCK, 7/16"-14, GB
6	N7643	CYLINDER	- lift, parts list Figure 190
7	165-166	HEX SOC SCREW,Prev Torque, 1/2" - 20 x 2"	SCREW - hex socket head, 1/2" - 20 NF x 2"
8	92-8	LOCK WASHER,1/2"
9	D74410	FRAME ASSY	FRAME - center, Includes: Ref. 10 - 13
10	D55412	STRIP	WEAR PLATE - 1/8" thick x 10" (3 mm x 254 mm)
11	D55410	STRIP	WEAR PLATE - 3/16" thick x 10" (5 mm x 254 mm)
12	D55411	STRIP	WEAR PLATE - 1/8" x 6" (3 mm x 152 mm)
13	D55409	STRIP	WEAR PLATE - 3/16" thick x 6" (5 mm x 152 mm)
13a	D74412	PLATE	- spacer
14	D74411	FRAME	- inner, Includes: Ref. 15 - 17
15	D27362	WEAR PAD	WEAR PLATE - 1/8" thick x 10" (3 mm x 254 mm)
16	D27365	PAD	WEAR PLATE - 3/16" thick x 10" (5 mm x 254 mm)
17	D39476	BUSHING	- chain anchor, no longer available, order N6878 link
18	25-1116	NUT,1"-14, G5	- hex, 1" - 14 NF
19	N6877	BOLT	- inner chain, Includes: Ref. 20
19	D36575	EYEBOLT	- inner chain, order N6877 and N6878, Includes: Ref. 20
20	D39476	BUSHING	- eyebolt, D36575, no longer available, order N6878 link
21	N6878	CHAIN LINK	LINK - connecting, inner chain, Includes: Ref. 21A
		Connecting links cannot be used as repair links and can only be added to the end of chain. Any damaged links will require replacement of chain.
21	D36579	LINK	- connecting, order N6878 link, Includes: Ref. 21A
		Connecting links cannot be used as repair links and can only be added to the end of chain. Any damaged links will require replacement of chain.
21a	132-45	COTTER PIN,1/8" x 5/8"	Pin, Split (Cotter), 1/8" x 5/8"
21b	D73665	CHAIN (AG)	CHAIN - inner, 95 links
22	25-1112	NUT,3/4"-16, G5	- hex, 3/4" - 16 NF
23	N6011	BOLT	- outer chain, Includes: Ref. 24
23	D26200	BOLT	- outer chain, order N6010 and N6011, Includes: Ref. 24
24	D26196	BUSHING	- eyebolt, D26200, no longer available, order N6010 link
25	N6010	LINK,50.749mm Pitch	- connecting, outer chain, Includes: Ref. 25A
		Connecting links cannot be used as repair links and can only be added to the end of chain. Any damaged links will require replacement of chain.
25	D32583	LINK	- connecting, order N6010 link, Includes: Ref. 25A
		Connecting links cannot be used as repair links and can only be added to the end of chain. Any damaged links will require replacement of chain.
25a	132-25	COTTER PIN,3/32" x 5/8"	Pin, Split (Cotter), 3/32" x 5/8"
26	D74408	CHAIN (AG)	CHAIN - outer, 111 links
27	219-53	LUBE NIPPLE,65 Degree Elbow, 3/16" NPTF	GREASE FITTING - 67-1/2 degree, 3/16" drive
		Steel balls are used in some pins in place of grease fittings when sealed bearings are used.
27a	211-5	BALL,3/16" Dia	- steel, 3/16", if used, not shown
		Steel balls are used in some pins in place of grease fittings when sealed bearings are used.
28	132-102	COTTER PIN,3/16" x 2 1/2"	Pin, Split (Cotter), 3/16" x 2 1/2"
29	D36584	PIN	- guide wheel, inner chain
30	D36582	WASHER	THRUST WASHER - inner wheel
31	D39482	SUPPORT,1.75" ID x 4.3" OD x 1.51"	WHEEL - guide, inner chain
32	132-99	COTTER PIN,3/16" x 2"	Pin, Split (Cotter), 3/16" x 2"
33	D87070	PIN	- wheel, service, includes Refs. 27 and 27A
34	60944	THRUST WASHER	THRUST WASHER - outer wheel
35	D32588	SPROCKET ASSY.	WHEEL - guide, requires grease fitting, if used, outer chain
35	D87069	SPROCKET ASSY.	WHEEL - guide, sealed, if used, outer chain
36	61-828	HEX SOC SCREW,1/2"-13 x 1 3/4"	SCREW - hex socket head, 1/2" - 13 NC x 1-3/4"
37	25-148	JAM NUT,Jam, 1/2"-13, G5	- hex, lock, 1/2"-13 NC
38	D74406	LARGE PLATE	BACK PLATE - upper, 60" long
39	138-2050	PIN,7/16" x 2", Coiled
40	D74405	PLATE	BACK PLATE - lower, 60" long
41	D55405	SHEET	CARRIAGE - right-hand, Includes: Ref. 42 and 43
		Carriages must be aligned and drilled at time of installation.
42	D55407	WEAR PAD	WEAR PLATE - bronze
43	D26196	BUSHING	- chain anchor, no longer available, order N6010 link
44	D55406	SHEET	CARRIAGE - left-hand, Includes: Ref. 45 and 46
		Carriages must be aligned and drilled at time of installation.
45	D55407	WEAR PAD	WEAR PLATE - bronze
46	D26196	BUSHING	- chain anchor, no longer available, order N6010 link
47	219-13	LUBE NIPPLE,3/16" NPTF	GREASE FITTING - straight, 3/16" drive, if used
		Steel balls are used in some pins in place of grease fittings when sealed bearings are used.
47a	211-5	BALL,3/16" Dia	- steel, 3/16", if used
		Steel balls are used in some pins in place of grease fittings when sealed bearings are used.
48	25-148	JAM NUT,Jam, 1/2"-13, G5	- hex, jam, 1/2"-13 NC
49	178-692	SET SCREW,Hex Soc, 1/2"-13 x 2 3/4"	- socket head, 1/2" - 13 NC x 2-3/4"
50	D86606	AXLE	PIN - roller, service, includes Refs. 47 and 47A
51	D52299	BEARING, ROLLER,31.75mm ID x 76.2mm OD x 32mm W	ROLLER - load
52	D52298	WASHER,32.16mm ID x 69.85mm OD x 2.77mm Thk	THRUST WASHER - roller
53	D55404	WASHER,32.16mm ID x 69.85mm OD x 6.35mm Thk	THRUST WASHER - roller
54	13-872	BOLT,Hex, 1/2" - 13 x 4-1/2", Gr 5	If used, see Refs. 60-62 Hex, 1/2"-13 x 4 1/2", G5
55	92-8	LOCK WASHER,1/2"	if used 1/2"
56	25-108	NUT,1/2"-13, G5	- hex, 1/2" - 13 NC, if used
57	D75934	BAR	- trunnion
58	D40841	LARGE PLATE	WEAR PLATE - horizontal
59	D40840	LARGE PLATE	WEAR PLATE - vertical
60	D88745	LARGE PLATE	PLATE - trunnion bar ends, if used, see Ref. 54
61	13-548	CAP,Hex, 5/16" - 18 x 3", Gr 5	BOLT - hex head, 5/16" - 18 NC x 3", if used
62	131-4	LOCK NUT,5/16"-18, GB	NUT - hex, self-locking, 5/16" - 18 NC