| № | Номер | Название | Опции | Альт |
|---|
| 1 | 1339877C2 | BUTTON | - horn, includes Ref. 1B, used with 1344401C4 steering column, shown below, Serial Range: -JEE0042075 | | | 1a | 195277A1 | PLUG | CAP ASSEMBLY - center, steering wheel, includes Ref. 1B, used with 195273A1 steering column shown on Figure 5-3A, Includes: Ref. 1B, Start Serial: JEE0042075 | | | 1b | A180055 | CAP ASSY. | INSERT - Case Globe and Eagle | | | 2 | F19646 | LOCK NUT,13/16"-20, Thin | NUT - lock, steering wheel retaining | | | L128095 | WHEEL (STEERING) | WHEEL ASSEMBLY - steering, Includes: Ref. 3 - 8 | | | 3 | S301434 | SCREW | - special | | | 4 | S301399 | CAP | - steering wheel | | | 5 | D147465 | STEERING WHEEL | WHEEL - steering, not serviced separately, for service order D148204 steering wheel, shown below, or L128095 steering wheel assembly | | | | Ref. 13B and 13C are also used for service to replace the rivet in the steering column U-joint used on some models. | | | | 6 | S301435 | PLUG | - steering wheel, remove to use spinner knob | | | 7 | S301401 | HUB | - steering wheel, not serviced separately | | | 8 | S301400 | BOOT | - steering wheel | | | 9 | L127996 | KNOB | - spinner, steering wheel, no longer available, order Ref. 9A, 97400C1, if used | | | 9a | 97400C1 | HANDLE | KNOB - spinner, steering wheel, if used | | | 1344401C4 | STEERING COLUMN | COLUMN ASSEMBLY - steering, with brush and horn wires, shown below, if used, Includes: Ref. 10 - 13C, Serial Range: -JEE0042075 | | | 10 | NSS | NOT SOLD SEPARAT | COLUMN - steering | | | 11 | 1987236C1 | BRUSH ASSY. | BRUSH - horn, no longer available, order kit 292150A1 below | | | | Ref. 13B and 13C are also used for service to replace the rivet in the steering column U-joint used on some models. | | | | 12 | 261-5454 | SELF-TAP SCREW,Cross Pan Hd, #10 x 1/4" | SCREW - self-tapping, pan Phillips, No. 10 NC x 1/4 inch | | | 13 | 139204A1 | CAP | COVER - column, top, replaces A49647 cover | | | 13a | 194040A1 | UNIVERSAL JOINT | JOINT ASSEMBLY - universal, steering column | | | 13b | L128176 | STEP BOLT | BOLT - shoulder, special | | | | Ref. 13B and 13C are also used for service to replace the rivet in the steering column U-joint used on some models. | | | | 13c | L128177 | LOCK NUT | - self-locking, special | | | | Ref. 13B and 13C are also used for service to replace the rivet in the steering column U-joint used on some models. | | | | 14 | A77310 | SUPPORT,0.754" ID x 1.375" OD x 0.81" | - pivot | | | 15 | 426-616 | BOLT,Hex, 3/8" - 16 x 1", Gr 8 | | | | 16 | 492-11038 | LOCK WASHER,3/8" | | | | 17 | 425-106 | NUT,3/8"-16, Cl 5 | | | | 18 | L100096 | ISOLATOR | COUPLING - isolator | | | 19 | 414-620 | BOLT,Hex, 3/8" - 24 x 1-1/4", Gr 5 | Hex, 3/8"-24 x 1 1/4", G5, Full Thd | | | 20 | A145915 | SEAL,41.148mm ID x 57.15mm OD x 12.7mm Thk | - floor plate and steering control valve | | | 21 | 1344479C1 | LARGE PLATE | PLATE - floor, steering alignment | | | 22 | A141515 | ISOLATOR | MOUNT - two piece, includes both halves | | | 23 | 495-81150 | WASHER,0.44" ID x 1.25" OD x 0.07" Thk | - flat, 7/16 x 1-1/4 x 1/16 inch | | | 24 | 326-632 | BOLT,Hex, 3/8" - 16 x 2", Gr 8 | | | | 25 | 426-628 | BOLT,Hex, 3/8" - 16 x 1-3/4", Gr 8 | - hex, 3/8 NC x 1-3/4 inch, grade 8 | | | 26 | 492-11038 | LOCK WASHER,3/8" | | | | D148204 | WHEEL (STEERING) | WHEEL - steering, also includes spacer ring, steering wheel hub, (3) socket head capscrews, and (3) lockwashers, 16 inch, 3 spoke, also includes spacer ring, steering wheel hub, (3) screws, and (3) washers, 16 inch, 3 spoke, not shown | | | | Ref. 13B and 13C are also used for service to replace the rivet in the steering column U-joint used on some models. | | | | 292150A1 | BRACKET | KIT - brush and bracket assembly | | | | Ref. 13B and 13C are also used for service to replace the rivet in the steering column U-joint used on some models. | | | | 27 | L129607 | VALVE | ASSEMBLY - steering control, stamped 261-1192-081 on name plate, parts list figure 5-4 and 5-5A, if used | | | 27 | 135604A1 | VALVE | ASSEMBLY - steering control, stamped 261-1192-082 on name plate, parts list figure 5-5C, if used | | | 31 | A163012 | SPRING | - tilt latch | | | 32 | 1990517C1 | LEVER | - tilt latch | | | 33 | 1990519C1 | SPACER | BUSHING - lever | | | 34 | 1969906C3 | LATCH ASSY. | RACK - tilt latch | | | 35 | 1969903C4 | LATCH ASSY. | LATCH - tooth | | | 36 | 426-412 | BOLT,Hex, 1/4" - 20 x 3/4", Gr 8 | - hex, 1/4 NC x 3/4 inch, grade 8 | | | 37 | 492-11038 | LOCK WASHER,3/8" | | | | 38 | 425-144 | JAM NUT,Jam, 1/4"-20, G5 | - hex, jam, 1/4 inch NC | | | 39 | 425-146 | JAM NUT,3/8" - 16, Gr 5 | - hex, jam, 3/8 inch NC | | | 40 | 426-424 | BOLT,Hex, 1/4" - 20 x 1-1/2", Gr 8 | - hex, 1/4 NC x 1-1/2 inch, grade 8 | | | 41 | 426-616 | BOLT,Hex, 3/8" - 16 x 1", Gr 8 | | | | 42 | 496-81024 | WASHER,0.41" ID x 1.25" OD x 0.07" Thk | - flat, 13/32 x 1-1/4 x 1/16 inch, hardened | | | 43 | 895-11010 | WASHER,11mm ID x 20mm OD x 2mm Thk | - flat, 11 x 20 x 2 mm | | | 195273A1 | STEERING COLUMN | COLUMN ASSEMBLY - steering, without brush and horn wires, Start Serial: JEE0042075 | | | 44 | NSS | NOT SOLD SEPARAT | COLUMN - steering, order 195273A1 | | | 45 | 139204A1 | CAP | COVER - column, replaces A49647 | | | 46 | 194040A1 | UNIVERSAL JOINT | JOINT ASSEMBLY - universal steering column, Includes: Ref. 47 and 48 | | | 47 | L128176 | STEP BOLT | BOLT - shoulder, special | | | 48 | L128177 | LOCK NUT | - self-locking, special | |
|
|