| № | Номер | Название | Опции | Альт |
|---|
| L15296 | BUCKET - Drott, without teeth (1 cu. yd.) machinery item, Includes: Ref. 1 - 38 | | |
| 1 | A18679 | CYLINDER | - clam (Parts list Figure 210) | |
| L32006 | | BLADE ASSEMBLY - bucket, Includes: Ref. 2 - 15 | |
| 2 | NSS | NOT SOLD SEPARAT | BLADE - bucket | |
| 3 | A18658 | EDGE | CUTTING EDGE - blade assembly | |
| 4 | 19-1232 | CARRIAGE BOLT,#3, 3/4" - 10 x 2", Gr 5 | BOLT - plow (3/4" - 10 NC x 2") | |
| 5 | 19-1236 | CARRIAGE BOLT,#3, 3/4" - 10 x 2 1/4", Gr 5 | BOLT - plow (3/4" - 10 NC x 2-1/4") | |
| 6 | 25-1012 | NUT,3/4"-10, G5 | | |
| 7 | A18665 | PIN | -, Serial Range: cylinder-blade | |
| 8 | A18664 | CLEVIS PIN | PIN - clevis (3/8" x 2-3/8") | |
| 9 | 132-48 | COTTER PIN,1/8" x 1" | Pin, Split (Cotter), 1/8" x 1" | |
| 10 | A18663 | PIN | - clam to blade, Includes: Ref. 11 | |
| 11 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight (1/8" NPT) | |
| 12 | A18666 | PIN | - clevis (1/2" x 4") | |
| 13 | 132-46 | COTTER PIN,1/8" x 3/4" | Pin, Split (Cotter), 1/8" x 3/4" | |
| 14 | D33678 | BUSHING,51.02mm ID x 63.5mm OD x 22.3mm L | - lift arm mounting pins (Lower) | |
| 15 | D32865 | BUSHING,38.33mm ID x 47.63mm OD x 22.35mm L | - lift arm mounting pins (Upper) | |
| 16 | A17668 | CYLINDER | ELBOW - swivel, 90 degrees | |
| 17 | L32013 | | TUBE - control valve to clam cylinders, rod end | |
| 18 | L32015 | | TUBE - control valve to clam cylinders, closed end 0.75" OD x 20.45, 5" L | |
| 19 | A17698 | | CLAMP - tube | |
| 20 | 13-616 | BOLT,Hex, 3/8" - 16 x 1", Gr 5, Full Thd | | |
| 21 | 92-6 | LOCK WASHER,3/8" | med. sect. 3/8" | |
| 22 | 95-6 | WASHER,3/8" | - plain () 3/8" | |
| 23 | L32017 | | TUBE - valve to clam cylinder, R.H. cylinder rod end - L.H. cylinder closed end 0.625" OD x 19.1" L | |
| 24 | L32019 | TUBE,0.625" OD x 25.875" L | - valve to clam cylinder, R.H. cylinder closed end - L.H. cylinder rod end | |
| 25 | A17696 | COLLAR CLAMP | CLAMP - tube | |
| 26 | 92-6 | LOCK WASHER,3/8" | med. sect. 3/8" | |
| 27 | 25-106 | NUT,3/8"-16, G5 | - hex. (3/8" - 16 NC) | |
| 28 | D25670 | FLEXIBLE HOSE | HOSE - valve to clam cylinder, at cylinder (26" long) | |
| A18659 | CLAW | CLAM ASSEMBLY - bucket, Includes: Ref. 29 - 36 | |
| 29 | NSS | NOT SOLD SEPARAT | CLAM - bucket | |
| 30 | A18660 | BLADE | CUTTING EDGE - clam | |
| 31 | A18661 | PLATE | WEAR PLATE - clam | |
| 32 | D38842 | HOOK | GRAB HOOK - clam | |
| 33 | A18662 | BUSHING | -, Serial Range: clam-blade | |
| 34 | A18667 | PIN | -, Serial Range: clam-cylinder | |
| 35 | A18666 | PIN | - clevis (1/2" x 4") | |
| 36 | 132-48 | COTTER PIN,1/8" x 1" | Pin, Split (Cotter), 1/8" x 1" | |
| 37 | A18673 | DECAL | - cleanout | |
| 38 | A18489 | DECAL | - clam opening | |
| 39 | 321-1225 | | DECAL - bucket position | |
| 40 | L15299 | BRACKET - mounting, bucket position decal | | |
| 41 | 13-516 | BOLT,Hex, 5/16" - 18 x 1", Gr 5 | | |
| 42 | 92-5 | LOCK WASHER,5/16" | med. sect. 5/16" | |
| 43 | 9635082 | NUT,5/16" - 18, Gr 5 | - hex. (5/16" - 18 NC) | |
| A18668 | TOOTH | - bucket, Includes: Ref. 44 - 49 | |
| 44 | NSS | NOT SOLD SEPARAT | SHANK - tooth, bucket optional | |
| 45 | 13-844 | BOLT,Hex, 1/2" - 13 x 2-3/4", Gr 5 | Hex, 1/2"-13 x 2 3/4", G5, Bucket teeth optional | |
| 46 | 13-840 | BOLT,Hex, 1/2" - 13 x 2-1/2", Gr 5 | HHCS - 1/2" - 13 NC x 2-1/2", bucket teeth optional | |
| 47 | 25-108 | NUT,1/2"-13, G5 | - hex. (1/2" - 13 NC), bucket teeth optional | |
| 48 | A18670 | POINT | - tooth, bucket optional | |
| 49 | 138-178 | LOCK PIN,3/8" x 2 1/4", Slotted | PIN, , Bucket teeth optional 3/8" x 2 1/4", Slotted | |
