| № | Номер | Название | Опции | Альт |
|---|
| D18786 | MAST - complete, machinery item, see Figure 2 for ordering, Includes: Ref. 1 - 49 | | | | 1 | D75938 | CHANNEL | FRAME - outer, Includes: Ref. 2 - 4A | | | 2 | D32555 | PAD | WEAR PLATE - 1/8" thick x 5" (3 mm x 127 mm) | | | 3 | D27365 | PAD | WEAR PLATE - 3/16" thick x 10" (5 mm x 254 mm) | | | 4 | D41505 | WEAR PAD | WEAR PLATE - 3/16" thick x 4-1/2" (5 mm x 114 mm) | | | 4a | D40843 | BUSHING,25.4mm ID x 38.1mm OD x 24.38mm L | BEARING - self-aligning | | | 5 | 113-353 | BOLT,Hex, 7/16" - 14 x 6", Gr 5 | 7/16"-14 x 6", G5 | | | 6 | 231-1447 | NUT,7/16"-14, GB | NUT, LOCK, 7/16"-14, GB | | | 7 | N7643 | CYLINDER | - lift, parts list Figure 190 | | | 8 | 165-166 | HEX SOC SCREW,Prev Torque, 1/2" - 20 x 2" | SCREW - hex socket head, 1/2" - 20 NF x 2" | | | 9 | 92-8 | LOCK WASHER,1/2" | | | | 10 | D39481 | CHANNEL | FRAME - inner, Includes: Ref. 11 and 12 | | | 11 | 60972 | STRIP | WEAR PLATE - 1/8" thick x 11" (3 mm x 279 mm) | | | 12 | D36586 | PLATE | WEAR PLATE - 3/16" thick x 11" (5 mm x 279 mm) | | | 13 | 25-1116 | NUT,1"-14, G5 | - hex, 1" - 14 NF | | | 14 | N6877 | BOLT | - chain, Includes: Ref. 15 | | | 14 | D36575 | EYEBOLT | - chain, order N6877 and N6878, Includes: Ref. 15 | | | 15 | D39476 | BUSHING | - eyebolt, D36575, no longer available, order N6878 link | | | 16 | N6878 | CHAIN LINK | LINK - connecting, chain, Includes: Ref. 17 | | | | Connecting links cannot be used as repair links and can only be added to the end of chain. Any damaged links will require replacement of chain. | | | | 16 | D36579 | LINK | - connecting, lift chain, order N6878 link, Includes: Ref. 17 | | | | Connecting links cannot be used as repair links and can only be added to the end of chain. Any damaged links will require replacement of chain. | | | | 17 | 132-45 | COTTER PIN,1/8" x 5/8" | Pin, Split (Cotter), 1/8" x 5/8" | | | 18 | D39484 | CHAIN (AG) | CHAIN - lift, 89 links | | | 19 | 219-53 | LUBE NIPPLE,65 Degree Elbow, 3/16" NPTF | GREASE FITTING - 67-1/2 degree, 3/16" drive, if used | | | | Steel balls are used in some pins in place of grease fittings when sealed bearings are used. | | | | 19a | 211-5 | BALL,3/16" Dia | - steel, 3/16", if used, not shown | | | | Steel balls are used in some pins in place of grease fittings when sealed bearings are used. | | | | 20 | 132-102 | COTTER PIN,3/16" x 2 1/2" | Pin, Split (Cotter), 3/16" x 2 1/2" | | | 21 | N7324 | KIT | PIN - guide wheel, service, includes Refs. 19 and 19A | | | 22 | D36582 | WASHER | THRUST WASHER - wheel | | | 23 | D39482 | SUPPORT,1.75" ID x 4.3" OD x 1.51" | WHEEL - chain guide | | | 24 | 61-828 | HEX SOC SCREW,1/2"-13 x 1 3/4" | SCREW - hex socket head, 1/2" - 13 NC x 1-3/4" | | | 25 | 25-148 | JAM NUT,Jam, 1/2"-13, G5 | - hex, jam, 1/2"-13 NC | | | 26 | D36580 | LARGE PLATE | BACK PLATE - upper | | | 27 | 138-2050 | PIN,7/16" x 2", Coiled | | | | 28 | D36581 | LARGE PLATE | BACK PLATE - lower | | | 29 | D52321 | SUPPORT ASSY. | CARRIAGE - right-hand, Includes: Ref. 30 | | | | Carriages must be aligned and drilled at time of installation. | | | | | The 8, 1/2-13 mounting holes must be drilled and tapped at assembly. | | | | 30 | D39476 | BUSHING | - carriage, no longer available, order N6878 link | | | 31 | D52322 | SUPPORT ASSY. | CARRIAGE - left-hand, Includes: Ref. 32 | | | | Carriages must be aligned and drilled at time of installation. | | | | | The 8, 1/2-13 mounting holes must be drilled and tapped at assembly. | | | | 32 | D39476 | BUSHING | - carriage, no longer available, order N6878 link | | | 33 | 219-13 | LUBE NIPPLE,3/16" NPTF | GREASE FITTING - straight, 3/16" drive, if used | | | | Steel balls are used in some pins in place of grease fittings when sealed bearings are used. | | | | 33a | 211-5 | BALL,3/16" Dia | - steel, 3/16", if used, not shown | | | | Steel balls are used in some pins in place of grease fittings when sealed bearings are used. | | | | 34 | D36589 | PIN,25.4mm OD x 69.85mm L | - side roller | | | 35 | D36590 | ROLLER | - side | | | 36 | D86605 | AXLE | PIN - roller, service, includes Refs. 33 and 33A | | | 37 | 13-816 | BOLT,Hex, 1/2" - 13 x 1", Gr 5, Full Thd | | | | 38 | 92-8 | LOCK WASHER,1/2" | | | | 39 | D52298 | WASHER,32.16mm ID x 69.85mm OD x 2.77mm Thk | THRUST WASHER - roller | | | 40 | D52299 | BEARING, ROLLER,31.75mm ID x 76.2mm OD x 32mm W | ROLLER - load | | | 41 | 13-872 | BOLT,Hex, 1/2" - 13 x 4-1/2", Gr 5 | If used, see Refs. 47-49 Hex, 1/2"-13 x 4 1/2", G5 | | | 42 | 92-8 | LOCK WASHER,1/2" | if used 1/2" | | | 43 | 25-108 | NUT,1/2"-13, G5 | - hex, 1/2" - 13 NC, if used | | | 44 | D75934 | BAR | - trunnion | | | 45 | D40841 | LARGE PLATE | WEAR PLATE - horizontal | | | 46 | D40840 | LARGE PLATE | WEAR PLATE - vertaical | | | 47 | D88745 | LARGE PLATE | PLATE - trunnion bar ends, if used, see Ref. 41 | | | 48 | 13-548 | CAP,Hex, 5/16" - 18 x 3", Gr 5 | BOLT - hex head, 5/16" - 18 NC x 3", if used | | | 49 | 131-4 | LOCK NUT,5/16"-18, GB | NUT - hex, self-locking, 5/16" - 18 NC | |
|
|