| № | Номер | Название | Опции | Альт |
|---|
| 1 | REF | INSTRUCTION | CHASSIS ASSEMBLY - tractor (See Figure 114 for chassis and related parts), Includes: Ref. 2 | |
| 2 | D34506 | BUSHING,51.02mm ID x 63.5mm OD x 63.5mm L | - lift frame pivot bracket | |
| 3 | 13-820 | BOLT,Hex, 1/2" - 13 x 1-1/4", Gr 5, Full Thd | | |
| 4 | 92-8 | LOCK WASHER,1/2" | med. sect. 1/2" | |
| 4a | 195-33 | WASHER,1/2" | - plain () 1/2" | |
| 5 | L42511 | BLOCK | PLATE - pin retaining | |
| 6 | D34661 | PIN | - Hydra-Leveling, Serial Range: cylinders-chassis | |
| 7 | D34660 | PIN | - lift, Serial Range: cylinder-chassis | |
| 8 | REF | INSTRUCTION | CYLINDER - hydraulic, Hydra-leveling (See Figures 206 and 208 for proper cylinder) | |
| 9 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight (1/8" NPT) | |
| 10 | D25279 | SNAP RING,M35, Int | RING - pin retaining | |
| 11 | D34656 | PIN,38.1mm OD x 101.6mm L | - Hydra-Leveling cylinder to lift frame | |
| 12 | REF | INSTRUCTION | CYLINDER - hydraulic, R.H. loader lift (See Figures 198 and 200 for proper cylinder) | |
| 13 | REF | INSTRUCTION | CYLINDER - hydraulic, L.H. loader lift (See Figures 198 and 200 for proper cylinder) | |
| 14 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight (1/8" NPT) | |
| 15 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , pin #175, Ext | |
| 16 | D34658 | PIN,44.45mm OD x 101.6mm L | - lift cylinders to lift frame | |
| 17 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight (1/8" NPT) | |
| 18 | D34664 | RING | - pin retaining | |
| 19 | D34668 | WASHER,52.39mm ID x 76.2mm OD x 3.57mm Thk | - special | |
| 20 | L26116 | PIN | - lift frame pivot | |
| 21 | 113-458 | X | HHCS - 1/2" - 13 NC x 4" | |
| 22 | 92-8 | LOCK WASHER,1/2" | med. sect. 1/2" | |
| 23 | L26718 | | FRAME ASSEMBLY - loader lift, Includes: Ref. 24 - 28 | |
| 24 | D34506 | BUSHING,51.02mm ID x 63.5mm OD x 63.5mm L | - lift frame at chassis | |
| 25 | D30929 | BUSHING,38.33mm ID x 47.63mm OD x 38.1mm L | - lift frame at Hydra-Leveling and tilt cylinders | |
| 26 | D34354 | BUSHING,44.68mm ID x 53.98mm OD x 38.1mm L | - lift frame at lift cylinder | |
| 27 | D30931 | BUSHING,38.33mm ID x 47.63mm OD x 69.85mm L | - lift frame at tilt linkage | |
| 28 | D31142 | BUSHING,51.02mm ID x 63.5mm OD x 38.1mm L | - lift frame at bucket | |
| 29 | 13-12104 | BOLT,Hex, 3/4" - 10 x 6-1/2", Gr 5 | HHCS - 3/4" - 10 NC x 61-1/2" | |
| 30 | L13698 | | LEVER ASSEMBLY - tilt, outer (R.H.), Includes: Ref. 31 | |
| 31 | D31512 | BUSHING,47.75mm ID x 57.15mm OD x 19.05mm L | - lever | |
| 32 | D34647 | LINK | LEVER ASSEMBLY - tilt, outer (L.H.), Includes: Ref. 33 | |
| 33 | D31512 | BUSHING,47.75mm ID x 57.15mm OD x 19.05mm L | - lever | |
| 34 | D34653 | PIN | - link spacer, upper | |
| 35 | L13971 | | LEVER ASSEMBLY - tilt, inner (L.H.), Includes: Ref. 36 | |
| 36 | D31512 | BUSHING,47.75mm ID x 57.15mm OD x 19.05mm L | - lever | |
| 37 | L26605 | | LEVER ASSEMBLY - tilt, inner (R.H.), Includes: Ref. 38 | |
| 38 | D31512 | BUSHING,47.75mm ID x 57.15mm OD x 19.05mm L | - lever | |
| 39 | 230-41112 | LOCK NUT,3/4"-10, GA | NUT - hex., lock (3/4" - 10 NC) | |
| 40 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight (1/8" NPT) | |
| 41 | REF | INSTRUCTION | CYLINDER - hydraulic, R.H. loader tilt (See Figures 202 and 204 for proper cylinder) | |
| 42 | REF | INSTRUCTION | CYLINDER - hydraulic, L.H. loader tilt (See Figures 202 and 204 for proper cylinder) | |
| 43 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight (1/8" NPT) | |
| 44 | D25279 | SNAP RING,M35, Int | RING - pin retaining | |
| 45 | D34656 | PIN,38.1mm OD x 101.6mm L | - tilt cylinder to lift frame | |
| 46 | D34651 | LINK | ASSEMBLY - loader tilt, R.H., Includes: Ref. 47 and 48 | |
| 47 | D31140 | BUSHING,38.33mm ID x 47.63mm OD x 25.4mm L | - link, at tilt lever | |
| 48 | D30929 | BUSHING,38.33mm ID x 47.63mm OD x 38.1mm L | - link at bucket | |
| 49 | D34650 | LINK | ASSEMBLY - loader tilt, L.H., Includes: Ref. 50 and 51 | |
| 50 | D31140 | BUSHING,38.33mm ID x 47.63mm OD x 25.4mm L | - link, at tilt lever | |
| 51 | D30929 | BUSHING,38.33mm ID x 47.63mm OD x 38.1mm L | - link, at bucket | |
| 52 | 219-55 | LUBE NIPPLE,90 Degree Elbow, 1/8" - 27 NPTF | NIPPLE, LUBE, , LH link 90º, 1/8" NPT x .84" lg | |
| 52 | 219-36 | LUBE NIPPLE,45 Degree Elbow, 1/8" - 27 NPTF | FITTING - grease, 45 degrees (1/8" NPT) R.H. link (Not shown) | |
| 53 | D25279 | SNAP RING,M35, Int | RING - pin retaining | |
| 54 | D34654 | PIN | - tilt link to bucket (When stock is exhausted, order L47231 pin for service) | |
| 54 | L47231 | | PIN - tilt, Serial Range: link-bucket | |
| 55 | D26919 | SNAP RING,#200, Ext | Ring, Snap, , pin #200, Ext | |
| 56 | D34655 | PIN,50.8mm OD x 111.13mm L | - lift frame to bucket (When stock is exhausted, order L47232 pin for service) | |
| 56 | L47232 | PIN | - lift, Serial Range: frame-bucket | |
| 57 | REF | INSTRUCTION | BUCKET ASSEMBLY - loader (See page 136) | |
