| № | Номер | Название | Опции | Альт |
|---|
| 1 | R29870 | STARTING MOTOR | STARTER ASSEMBLY (Delco #1109149), Includes: Ref. 1 - 35 and 36 - 62 on figure 84 | |
| | This starter changed from a 10 tooth gear to a 9 tooth gear for faster cranking speed. This changed the nose piece in the area of the offset. Megavolt gets more cores in on the 10 tooth gear and the offset is only .050 diff. between the two gears. at times the nose pieces get mixed up and the result is the starter gear won't mesh with the ring gear unless the starter mounting bolts are loose. On 2/26/96 (MEGA-VOLT) is in process of designing a fixture to readily identify the different nose pieces. | | |
| 1 | 104202A2R | REMAN-STARTER | Starter Assembly (Delco #1109149), Includes: Ref. 1 - 35 and 36 - 62 on figure 84 | |
| 1 | 104202A1C | CORE-STARTER | Return Part Number | |
| 2 | A25304 | FRAME | FRAME ASSEMBLY - commutator end, Includes: Ref. 3 - 5 | |
| 3 | A45152 | BUSHING | BUSHING (9/16 x 11/16 x 25/32") (Replaces R15020) | |
| 4 | A41979 | WICK | WICK - oiler | |
| 5 | 221-1041 | PLUG | PLUG - oil wick hole (1/8" PT slotted head) | |
| 6 | A40217 | HOLDER | HOLDER - brush (Grounded) | |
| 7 | R15027 | HOLDER | HOLDER - brush (Insulated) | |
| 8 | A25359 | SPRING | SPRING - brush pressure | |
| 9 | A25356 | BRUSH, COMMUTATOR | BRUSH BRUSH | |
| 10 | D32481 | SELF-TAP SCREW,Sltd Pan Hd, #8-32 x 13/16", w/LW | SCREW - brush (#8-32 x 13/16" slotted head) | |
| 11 | A25379 | KIT | SUPPORT KIT - brush holder, Includes: Ref. 12 - 17 | |
| 12 | NSS | NOT SOLD SEPARAT | SUPPORT | |
| 13 | 173-212 | SCREW,Sl Rnd Hd, #10 - 24 x 1/2" | SCREW - support to frame (#10-24 x 1/2" round head) | |
| 14 | 192-18 | LOCK WASHER,Helical Spring, #10, 0.196" ID, CST, ZND | WASHER, LOCK, #10 | |
| 15 | 129-17 | NUT,Hex, #10 - 24 | NUT - hex #10-24 | |
| 16 | R15035 | PIN | PIN - brush holder | |
| 17 | A42494 | ELECTRICAL WIRE | WIRE LEAD - brush ground | |
| 18 | NSS | NOT SOLD SEPARAT | FRAME - starter body | |
| 19 | A25548 | COIL | COIL ASSEMBLY - field | |
| 20 | A25391 | SHOE | SHOE - pole | |
| 21 | 74-612 | SCREW,3/8" - 24 x 3/4" | SCREW - pole shoes (3/8 x 5/8" NF flat head) | |
| 22 | A40225 | CONNECTOR, ELEC | CONNECTOR CONNECTOR -, Serial Range: field-solenoid | |
| 23 | A41980 | GROMMET | GROMMET - connector insulating (In frame) | |
| 24 | 173-221 | SCREW,Sl Rnd Hd, #10 - 32 x 7/16" | SCREW - connector to coil (#10-32 x 7/16" round head) | |
| 25 | 192-18 | LOCK WASHER,Helical Spring, #10, 0.196" ID, CST, ZND | WASHER, LOCK, #10 | |
| 26 | A25547 | ARMATURE | ARMATURE | |
| 27 | A41917 | WASHER,14.25mm ID x 24.89mm OD x 1.57mm Thk | WASHER - thrust (At commutator end) | |
| 28 | A40215 | PLATE ASSY. | PLATE ASSEMBLY - center bearing, Includes: Ref. 29 | |
| 29 | R15038 | BUSHING | BUSHING - center bearing (3/4 x 13/16 x 23/32") | |
| 30 | A41959 | SCREW,#10 - 32 x 3/8" | SCREW - center bearing to drive housing | |
| 31 | R15043 | WASHER | WASHER - thrust, center bearing | |
| 32 | A45565 | DRIVE | DRIVE ASSEMBLY (With 10 teeth) (Replaces A43652) | |
| 32 | 87421540 | REMAN-STARTER DRIVE | 350 CASE CRAWLER TRACTOR, DRIVE ASSEMBLY (With 10 teeth), Reman for New PN A45565 | |
| 32 | 87421541 | CORE-STARTER DRIVE | Return Part Number | |
| 33 | R15049 | COLLAR | COLLAR - drive stop | |
| 34 | R15048 | RING | RING - snap, stop collar retaining | |
| 35 | A25385 | WASHER | WASHER - thrust (Drive end) | |
