| № | Номер | Название | Опции | Альт |
|---|
| 1343543C2 | VALVE | ASSEMBLY power shuttle, if used, see valve on Figure 6-24, Includes: Ref. 1 through 35 | | | | If valve with external tubing is replaced with 1343543C2, do not use the external tube. Install a cap plug on tee fitting where tube was installed. | | | | 1 | NSS | NOT SOLD SEPARAT | BODY shuttle valve | | | 2 | 1343540C1 | SPOOL | selector | | | 3 | A37558 | SEAL,14.27mm ID x 28.7mm OD x 6.73mm Thk | oil, shuttle valve | | | 4 | A175093 | SNAP RING,#56, Ext, Spiral | RING retaining, spool | | | 5 | 71100209 | PLUG,Hex Soc, 3/4"-16 ORB | Incl Ref 6 Hex Soc, 3/4"-16 ORB | | | 6 | 237-6008 | O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro | 8-1, 90 Duro, .644" ID x .087" Thk | | | 7 | 1343539C1 | SPOOL | PLUNGER detent | | | 8 | 1343535C1 | SPRING | detent | | | 9 | 9625178 | PLUG,9/16" - 18 ORB | Incl. Ref. 10 Hex Soc, 9/16"-18 ORB | | | 10 | 237-6006 | O-RING,0.078" Thk x 0.468" ID, -906, Cl 6, 90 Duro | 6-1, 90 Duro, .468" ID x .078" Thk | | | 11 | 1986755C1 | SPOOL | modulator pressure | | | 12 | 1343533C1 | VALVE SPRING | SPRING modulator, inner | | | 13 | 1343532C1 | SPRING | modulator, outer | | | 14 | 1343541C1 | PISTON | modulator | | | 15 | 71100209 | PLUG,Hex Soc, 3/4"-16 ORB | Incl Ref 16 Hex Soc, 3/4"-16 ORB | | | 16 | 237-6008 | O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro | 8-1, 90 Duro, .644" ID x .087" Thk | | | 17 | 86625138 | PLUG,7/18" - 14 | Includes Ref. 18 Hex Soc, 7/8"-14 ORB | | | 18 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | 10-1, 90 Duro, .755" ID x .097" Thk | | | 19 | 1343537C1 | SPOOL | pressure regulator | | | 20 | 20133R1 | DOWEL,5/16" x 1 3/4" | PIN pressure regulator | | | 21 | 1343534C1 | SPRING | pressure regulator | | | 22 | A188228 | PISTON | regulator | | | 23 | 86625138 | PLUG,7/18" - 14 | Includes Ref. 24 Hex Soc, 7/8"-14 ORB | | | 24 | 237-6008 | O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro | 8-1, 90 Duro, .644" ID x .087" Thk | | | 25 | 1971438C3 | SOLENOID | VALVE ASSEMBLY solenoid, Includes: Ref. 26, 27 and 28 | | | 26 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | 10-1, 90 Duro, .755" ID x .097" Thk | | | 27 | 238-5015 | O-RING,0.07" Thk x 0.551" ID, -15, Cl 5, 75 Duro | -015, 70 Duro, .551" ID x .070" Thk | | | 28 | 238-5014 | O-RING,0.07" Thk x 0.489" ID, -14, Cl 5, 75 Duro | -014, 70 Duro, .489" ID x .070" Thk | | | 29 | 1983241C1 | SWITCH | neutral start, Includes: Ref. 30 | | | 30 | 237-6006 | O-RING,0.078" Thk x 0.468" ID, -906, Cl 6, 90 Duro | 6-1, 90 Duro, .468" ID x .078" Thk | | | 31 | 1343538C1 | PLUG | cup, oil restrictor | | | 31a | 38-12008 | LOCK PIN,5/16" x 1/2", Slotted | Pin, 5/16" x 1/2", Slotted | | | 32 | 86529630 | PLUG,Hex Soc, 3/8"-24 ORB | Includes Ref. 33 Hex Soc, 3/8"-24 ORB | | | 33 | 237-6003 | O-RING,0.064" Thk x 0.301" ID, -903, Cl 6, 90 Duro | 3-1, .301" ID x .064" Thk | | | 34 | 9625178 | PLUG,9/16" - 18 ORB | Incl. Ref. 35 Hex Soc, 9/16"-18 ORB | | | | in place of the plugs Ref. 34 for checking forward and reverse clutch pressure; pressure switchs d139904 were installed after vin # jjg0167019 for use in the warning system. | | | | 35 | 237-6006 | O-RING,0.078" Thk x 0.468" ID, -906, Cl 6, 90 Duro | 6-1, 90 Duro, .468" ID x .078" Thk | | | 36 | 218-5107 | 90 ELBOW,90 Degree Elbow, 7/8" - 14 Male JIC x 7/8" - 14 Male ORB | 90 degree, 7/8-14 inch flare x adj O-ring boss, Incl. Ref. 37 | | | 37 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | 10-1, 90 Duro, .755" ID x .097" Thk | |
|
|