| № | Номер | Название | Опции | Альт |
|---|
| 1 | G33982 | CYLINDER BLOCK | CYLINDERS ASSMBLY - stabilizer, RH, 3-1/2" (89 mm) ID x 19-3/8" (493 mm) stroke, not shown assembled, Includes: Ref. 2 - 22 | |
| 1 | G33983 | CYLINDER BLOCK | CYLINDER ASSEMBLY - stabilizer, LH. 3-1/2" (89 mm) ID x 19-3/8" (493 mm) stroke, not shown assembled, Includes: Ref. 2 - 22 | |
| 2 | G33987 | TUBE | ASSEMBLY - cylinder, RH, Includes: Ref. 3 and 4 | |
| 2 | G33985 | TUBE | ASSEBLY - cylinder, LH, Includes: Ref. 3 and 4 | |
| 3 | D36203 | BUSHING,38.1mm ID x 61.91mm OD x 33.33mm W | - tube, self-aligning | |
| 4 | A10506 | SNAP RING,2.44", Int, #244 | Ring, Snap, 2.44", Int, #244 | |
| 5 | | RESERVED | | |
| G34629 | GLAND | ASSEMBLY - cylinder, Includes: Ref. 6 - 12 | |
| 6 | NSS | NOT SOLD SEPARAT | GLAND | |
| 7 | NSS | NOT SOLD SEPARAT | RING - center bearing | |
| 8 | D95144 | WIPER SEAL,50.77mm ID x 63.52mm OD x 7.92mm Thk | Wiper - piston rod | |
| | Part of seal kit P/N G34651 | | |
| | Look for cylinders assembly part number to be stamped on cylinder gland or tube. | | |
| 9 | G34322 | BEARING | - center | |
| | Part of seal kit P/N G34651 | | |
| | Look for cylinders assembly part number to be stamped on cylinder gland or tube. | | |
| 10 | 36971 | PRESSURE PIPE | SEAL - piston rod | |
| | Part of seal kit P/N G100778 | | |
| | Part of seal kit P/N G34651 | | |
| | Look for cylinders assembly part number to be stamped on cylinder gland or tube. | | |
| 11 | 15457 | PIN | O-RING - gland | |
| | Part of seal kit P/N G34651 | | |
| | Look for cylinders assembly part number to be stamped on cylinder gland or tube. | | |
| 12 | G32126 | BACK-UP RING,89.28mm ID x 95.38mm OD x 1.4mm Thk | - backup | |
| | Part of seal kit P/N G34651 | | |
| | Look for cylinders assembly part number to be stamped on cylinder gland or tube. | | |
| 13 | 187-1031 | SELF-TAP SCREW,Pan, 0.164"-32 x 1/4" | SCREW - self-tapping, no. 8-32 NC x 1/4" | |
| 14 | G33173 | ROD | ASSEMBLY - piston, 2" (51 mm) diameter, Includes: Ref. 15 | |
| | ROD ASSY HAS A 1" THREAD | | |
| 15 | D32865 | BUSHING,38.33mm ID x 47.63mm OD x 22.35mm L | - piston rod | |
| 16 | G33167 | PISTON | - split, rod end | |
| 17 | D28367 | PISTON | - split, bolt end | |
| 18 | D47203 | PACKING,76.07mm ID x 88.77mm OD x 29.18mm Thk | ASSEMBLY - piston, V-type | |
| | Part of seal kit P/N G34651 | | |
| | Look for cylinders assembly part number to be stamped on cylinder gland or tube. | | |
| 19 | D47208 | RING | - center bearing | |
| 20 | 28-1640 | BOLT,Hex, 1" - 14 x 2-1/2", Gr 8 | | |
| | 20 BOLT IS A 1" BOLT | | |
| 21 | G32303 | WASHER,26.97mm ID x 47.63mm OD x 3.58mm Thk | - hardened | |
| 22 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | GREASE FITTING - straight, 1/8" NPT | |
| G34651 | SEAL | KIT - seal, Includes Refs. 8, 9, 10, 11, 12 and 18 | |
| | Look for cylinders assembly part number to be stamped on cylinder gland or tube. | | |
| G100778 | SEAL | - piston rod, service option - severe heat or cold | |
| | Look for cylinders assembly part number to be stamped on cylinder gland or tube. | | |
