(6-40) - REAR DRIVE AXLE, DIFFERENTIAL, FOUR WHEEL DRIVE MODELS

№	Номер	Название	Опции
	D124605	CENTER AXLE	AXLE ASSEMBLY (CARRARO 118218) - rear drive, Includes: Ref. 1 - 43
		D124605 Axle Assembly includes all parts on Figure 6-36 through 6-44.
1	N8894	COVER	- carrier assembly
2	614-8020	BOLT,Hex, M8 x 1.25 x 20mm	- hex, full threads, 8 - 1.25 x 20 mm
3	892-11008	LOCK WASHER,8mm ID	WASHER, LOCK, M8
4	1967604C1	OIL SEAL	SEAL - oil, pinion shaft (Replaces seal N8895)
5	K965364	GASKET	- cover
6	K965267	O-RING,0.07" Thk x 4.489" ID	- front pivot
7	K965265	BUSHING	COLLAR - front pivot
8	K965264	WASHER	- thrust, bearing
9	N7537	RING	NUT - pinion shaft
10	K261065	LOCK WASHER	- special
11	1964249C1	TAPERED BEARING,40 mm ID x 90 mm OD x 25.25 mm	BEARING ASSEMBLY - cup and cone, tapered roller bearing, outer (Replaces bearing K965358)
12	905834R1	THIN NUT,M12 x 1.25, Thin	Hex (Replaces nut K965255) M12 x 1.25, Thin
	N7528	SUPPORT	CARRIER ASSEMBLY - differential, does not include Ref. 19A and 19B, Includes: Ref. 13 - 16
13	NSS	NOT SOLD SEPARAT	CARRIER - differential, order carrier assembly N7528
14	K965257	STUD	- differential carrier
15	1966136C1	BUSHING,15mm ID x 18mm OD x 12mm L	- centering carrier (Replaces bushing K965259)
16	905873R1	NUT,M14 x 1.5, G8	NUT - hex, self-locking, special
17	A156873	PLUG, DRAIN,M22 x 1.5	(Replaces plug K965263) M22 x 1.5
18	K965280	SHIM,2.50mm Thk
18	K965281	SHIM,2.55mm Thk	No longer available 2.55mm Thk
		Order spacer 1349058C1 and washer 1349059C1, Ref. 19A and 19B.
18	K965282	SHIM,2.60mm Thk
18	K965283	SHIM,2.65mm Thk	No longer available 2.65mm Thk
		Order spacer 1349058C1 and washer 1349059C1, Ref. 19A and 19B.
18	K965284	SHIM,40.1mm ID x 50mm OD x 2.7mm Thk
18	K965285	SHIM,2.75mm Thk	No longer available 2.75mm Thk
		Order spacer 1349058C1 and washer 1349059C1, Ref. 19A and 19B.
18	K965286	SHIM,2.85mm Thk
18	K965287	SHIM,2.85mm Thk	No longer available 2.85mm Thk
		Order spacer 1349058C1 and washer 1349059C1, Ref. 19A and 19B.
18	K965288	SHIM,2.90mm Thk
18	K965289	SHIM,2.95mm Thk	No longer available 2.95mm Thk
		Order spacer 1349058C1 and washer 1349059C1, Ref. 19A and 19B.
18	K965290	SPACER	SHIM - 3.00 mm thick
18	K965291	SHIM,3.05mm Thk	No longer available 3.05mm Thk
		Order spacer 1349058C1 and washer 1349059C1, Ref. 19A and 19B.
18	K965292	SHIM,3.10mm Thk
18	K965293	SHIM,3.15mm Thk	No longer available 3.15mm Thk
		Order spacer 1349058C1 and washer 1349059C1, Ref. 19A and 19B.
18	K965294	SHIM,3.20mm Thk
18	K965295	SHIM,3.25mm Thk	No longer available 3.25mm Thk
		Order spacer 1349058C1 and washer 1349059C1, Ref. 19A and 19B.
18	K965296	SHIM,3.30mm Thk
18	K965297	SHIM,3.35mm Thk	No longer available 3.35mm Thk
		Order spacer 1349058C1 and washer 1349059C1, Ref. 19A and 19B.
18	K965298	SHIM,3.40mm Thk
19	895-11008	WASHER,9mm ID x 16mm OD x 1.6mm Thk	Used as a spacer M8 x 16 x 1.6
19a	1349058C1	SPACER	- collapsible, not shown
19b	1349059C1	WASHER,40.5mm ID x 50mm OD x 2mm Thk	- spacer, not shown
20	K965357	BEARING	ASSEMBLY - cup and cone,tapered roller bearing, inner
21	N8893	SET OF PINIONS	GEAR - set, ring and pinion
22	N8896	CASE	CAGE - differential
23	514-842	BOLT,Hex, M12 x 1.25 x 25mm, Cl 8.8, Full Thd	Cage to ring gear (Replaces bolt K965356) Hex, M12 x 1.25 x 25, 8.8, Full Thd
24	K965355	PLATE, LOCKING	PLATE - lock, cage bolts
25	K965347	BUSHING	- cage, to side gear
26	K965346	WASHER	- cage, inner
27	K965348	PIN	- dowel washer cage
28	E43051	GEAR	- side, differential
29	1967538C1	CONE PINION	GEAR - pinion, differential (Replaces gear E43052)
30	1967521C1	WASHER	WASHER - pinion gear (Replaces washer K965350)
31	K965353	BLOCK	- support
32	K965352	PIN	SHAFT - long
33	K965354	PIN	SHAFT - short
34	K965349	PIN	- dowel, differential shafts
35	K965343	PLATE	COVER - differential
36	614-10025	BOLT,Hex, M10 x 1.5 x 25mm, Cl 8.8	Cover (Replaces bolt K965341) Hex, M10 x 25, 8.8, Full Thd
37	K965342	RETAINER	PLATE - lock, cover bolts
38	K965339	BEARING	ASSEMBLY - cup and cone, tapered roller bearing, side gears
39	K965338	LOCK	RING - bearing adjustment
40	838-5422	LOCK PIN,M4 x 22, Slotted	PIN - roll, adjustment ring lock (Replaces pin K965340)
41	K956954	SPLINED COUPLING	FLANGE - drive shaft
42	514-723	BOLT,Hex, M10 x 1.25 x 60mm, Cl 8.8	- hex, 10 - 1.25 x 60 mm
43	K965414	NUT	- hex, 10 mm - 1.25