(228) - EQUIPMENT HYDRAULIC CIRCUIT, PUMP TO RESERVOIR AND CONTROL

№	Номер	Название	Опции
1	R38214	PUMP	ASSEMBLY - loader models, used before tractor SN 7308951, parts list Figure 236
		For the hydraulic circuit on models with a Sperry Vickers pump, see Figure 232.
1	R42142	PUMP	ASSEMBLY - dozer and drawbar models, used before tractor SN 7308701, parts list Figure 238
		For the hydraulic circuit on models with a Sperry Vickers pump, see Figure 232.
2	G102127	STUD	- 1/2" - 13 NC x 3-3/8"
3	92-8	LOCK WASHER,1/2"
4	25-108	NUT,1/2"-13, G5	- hex, 1/2" - 13 NC
5	S6592	O-RING,0.139" Thk x 2.234" ID, -228, Cl 6, 90 Duro	- 2", dozer and drawbar models
5	L53821	O-RING,0.139" Thk x 1.859" ID, -225, Cl 6, 90 Duro	- 1-1/2", loader models
6	A14141	FLANGE	CLAMP - split flange, dozer and drawbar models
6	A14157	FLANGE	CLAMP - split flange, loader models
7	13-824	BOLT,Hex, 1/2" - 13 x 1-1/2", Gr 5, Full Thd
8	92-8	LOCK WASHER,1/2"
9	221-11	PLUG,Sq Hd, 1/8"-27	- square head, 1/8" NPT
10	214-176	HOSE CLAMP,1-3/4" - 2-5/8", HD Worm	adjustable 1.25/2.625 HD Worm
11	R43919	HOSE	- 2" (51 mm) ID x 5-1/2" (140 mm) long, two used before tractor SN 7308496, one used on tractor SN 7308496 and after
11a	R45493	HOSE,50.80 mm ID x 203.20 mm	Used on Tractor SN 7308496 and After 50.80 mm ID x 203.20 mm
12	R38734	TUBE,2" OD	- at reservoir
13	R42138	TUBE	- dozer and drawbar models, used before tractor SN7308496
13a	R43862	TUBE,2 - 2.81" OD	- dozer and drawbar models, used on tractor SN 7308496 thru 7308700
13	R38738	PIPE FITTING,1.998" ID x 2 - 2.38" OD	TUBE - loader models, used before tractor SN 7308498
13a	R43809	TUBE ASSY.	TUBE - loader models, used on tractor SN 7308498 and after
14	R30064	CLAMP	- tube, at hydraulic reservoir
15	R30065	GASKET	- tube
16	R30066	RETAINER	- gasket
17	R38735	TUBE,2" OD	- to pump, used before tractor SN 7308496
17	R43814	TUBE,2" OD	- to pump, used tractor SN 7308496 and after
18	R27927	HOSE	- dozer models, used before tractor SN 7308701
18	R38289	HOSE	- loader models
19	R33616	BRACKET	- hose mounting
20	A14157	FLANGE	CLAMP - split flange
21	13-828	BOLT,Hex, 1/2" - 13 x 1-3/4", Gr 5	- hex head, 1/2" - 13 NC x 1-3/4"
22	195-33	WASHER,1/2"	- flat, 1/2"
23	92-8	LOCK WASHER,1/2"
24	25-108	NUT,1/2"-13, G5	- hex, 1/2" - 13 NC
25	R33811	TUBE	- pump to control valve, Includes: Ref. 25A
25a	221-11	PLUG,Sq Hd, 1/8"-27	- square head, 1/8" NPT
26	S6586	O-RING,0.139" Thk x 1.484" ID, -222, Cl 6, 90 Duro	- tubes
27	A12301	CLAMP,Half	CLAMP - split flange
28	13-724	BOLT,Hex, 7/16" - 14 x 1-1/2", Gr 5	Hex, 7/16"-14 x 1 1/2, G5
28a	13-720	BOLT,Hex, 7/16" - 14 x 1-1/4", Gr 5, Full Thd
29	92-7	LOCK WASHER,7/16"
30	REF	INSTRUCTION	CONTROL VALVE - equipment, see Figures 308 - 314 for correct valve
31	R40140	TUBE,1.5" OD	- to hydraulic reservoir, at control valve
32	R43918	HOSE	- 1-1/2" (38 mm) ID x 4-1/2" (114 mm)
33	214-176	HOSE CLAMP,1-3/4" - 2-5/8", HD Worm	adjustable 1.25/2.625 HD Worm
34	R27310	TUBE	- return, at hydraulic reservoir
35	R27612	CLAMP	- split flange
		This clamp only has one bolt hole.
36	A30916	O-RING,1.475" ID x 1.875" OD x 0.21"	- tube, at hydraulic reservoir
37	13-828	BOLT,Hex, 1/2" - 13 x 1-3/4", Gr 5	- hex head, 1/2" - 13 NC x 1-3/4"
38	92-8	LOCK WASHER,1/2"
39	R38740	BRACKET	- tube support
40	13-612	BOLT,Hex, 3/8" - 16 x 3/4", Gr 5, Full Thd
41	92-6	LOCK WASHER,3/8"
43	L53821	O-RING,0.139" Thk x 1.859" ID, -225, Cl 6, 90 Duro	- 1-1/2", dozer models
43	S6586	O-RING,0.139" Thk x 1.484" ID, -222, Cl 6, 90 Duro	- 1-1/4", loader models
44	A14157	FLANGE	CLAMP - split flange, dozer models
44	A12301	CLAMP,Half	CLAMP - split flange, loader models
45	13-724	BOLT,Hex, 7/16" - 14 x 1-1/2", Gr 5	Hex, 7/16"-14 x 1 1/2, G5, Loader models
45	13-824	BOLT,Hex, 1/2" - 13 x 1-1/2", Gr 5, Full Thd	Dozer models Hex, 1/2"-13 x 1 1/2", G5, Full Thd
46	92-7	LOCK WASHER,7/16"	if used 7/16"
46	92-8	LOCK WASHER,1/2"	if used 1/2"
47	D32004	GASKET	- pump
48	D37030	HUB	GEAR - equipment pump drive, 3" (76 mm) total length, used before tractor Sn 7308951