| № | Номер | Название | Опции | Альт |
|---|
| 1 | A179999 | AXLE | TRANSAXLE ASSEMBLY two wheel drive, parts list pages 6-231 thru 7-259 | | | | 4 wheel drive is P/N AR180000 - not shown or listed | | | | 1 | AR179999 | REMAN-TRANSAXLE, 2WD | REMAN-TRANSAXLE, 2WD Remanufactured Axle; For N.A. only | | | 1 | AC179999 | CORE-TRANSAXLE, 2WD | Return number - For N.A. only | | | 2 | A38208 | WHEEL BOLT,5/8-18 UNF Class 2A | WHEEL BOLT, Retaining, grade 5, Rear, Used with P/N A139085 rear wheels, if used, also see Ref. 38 and 39 in Figure 06-208 | | | 2 | D140705 | BOLT | BOLT grade 8, wheel retaining, rear, used with P/N D140062 rear wheels, if used | | | 3 | D127596 | PLATE | PLATE spacer | | | 4 | 26-16176 | BOLT,Hex, 1" - 8 x 11", Gr 8 | BOLT hex head, 1"-8 NC x 11", grade 8 | | | 5 | D36505 | WASHER,26.99mm ID x 47.63mm OD x 2.38mm Thk | WASHER flat, 1", hardened, special | | | 6 | 129-185 | NUT,1"-8, G8 | NUT hex, 1"-8 NC, grade 8 | | | 7 | D138048 | DIPSTICK | DIPSTICK transaxle, Includes: Ref. 8 | | | 8 | F62075 | O-RING,0.139" Thk x 0.734" ID, -210, Cl 5, 75 Duro | O-RING dipstick | | | 9 | D133966 | TUBE | ROD shift bracket | | | 10 | D133974 | PIN,12.7mm OD x 76mm L | PIN rod attaching | | | 11 | D143415 | SNAP RING,0.50” ID, Klipring | RETAINER pin | | | 12 | D136575 | LEVER | LEVER control, shift, transaxle, no longer available, order P/N D140218 lever and P/N 496-31053 washer, Ref. 56 and 59 in Figure 06-208 | | | 13 | 14-824 | BOLT,Hex, 1/2" - 20 x 1-1/2", Gr 5 | BOLT hex head, 1/2"-20 NF x 1-1/2" | | | 14 | L115782 | BALL JOINT | JOINT ball, female | | | 15 | 113-410 | BOLT,Hex, 1/2" - 13 x 1-1/2", Gr 5, Full Thd | BOLT, , Attaches to chassis Hex, 1/2"-13 x 1 1/2", G5, Full Thd | | | 16 | 192-23 | LOCK WASHER,1/2" | WASHER, LOCK, , If used 1/2" | | | 17 | D123562 | BOOT | BOOT shift lever | | | 18 | D91439 | TUBE | KNOB shift lever, if used | | | 19 | D129575 | PEDAL LOCK PLATE | PLATE differential lock boot | | | 20 | D129670 | BOOT | BOOT differential lock | | | 21 | 182-553 | SCREW,Cross Pan Hd, #10-32 x 5/8" | SCREW machine, pan Phillips head, No. 10-32 NF x 5/8", plated | | | 22 | 195-513 | WASHER,#10 | WASHER flat, No. 10, plated | | | 23 | D123827 | NUT | RETAINER threaded insert | | | 24 | D141474 | PEDAL | PEDAL differential lock | | | 25 | 219-57 | LUBE NIPPLE,90 Degree Elbow, 1/4" - 28 NPTF | FITTING grease, 90 degree, 1/4"-28 NF taper | | | 26 | D134165 | PLATE | BRACKET pivot shaft, pedal, may appear with or without center groove on shaft, for sertvice order P/N D103222 kit | | | 27 | 113-267 | BOLT,Hex, 3/8" - 16 x 4", Gr 5 | BOLT, Hex, 3/8"-16 x 4", G5 | | | 28 | 192-21 | LOCK WASHER,3/8" | WASHER, LOCK, 3/8" | | | 29 | 129-103 | NUT,Hex, 3/8" - 16, Gr 5 | NUT, 3/8"-16, G5 | | | D103222 | KIT | KIT service, differential lock pivot shaft, Includes: P/N D134165 bracket, Ref. 26 above and P/N D139528 spacer and (2) P/N A30881 washers, Ref. 30 and 30A in Figure 06-208 | |
|
|