| № | Номер | Название | Опции | Альт |
|---|
| 1 | D128268 | HANDLE | GRIP - control lever, see Fig. 4-26 for grip to be used models with horn | | | 2 | 413-632 | BOLT,Hex, 3/8" - 16 x 2", Gr 5 | - hex, 3/8 NC x 2 inch | | | 3 | E20959 | BUSHING | - control lever, was D123758 | | | 4 | D135135 | SPACER | - control lever, order E20641 spacer, 231-4116 nut, and 413-632 bolt | | | 5 | 230-4216 | LOCK NUT,3/8"-16, GA | NUT - hex, self-locking, 3/8 inch NC | | | 6 | D135154 | HANDLE | LEVER - control, loader, for right-hand control lever used on models with a horn, see Fig. 4-26 | | | 7 | 118309A1 | LEVER | ARM - control lever, was D135161, Serial Range: -JAF0096608 | | | 7a | 118309A1 | LEVER | ARM - control lever JAF0096608 to | | | 8 | 495-11041 | WASHER,0.406" ID x 0.812" OD x 0.065" W | (Flat, 13/32 x 13/16 x 1/16") 3/8", SAE | | | 9 | A30881 | SEALING WASHER,19.45mm ID x 31.35mm OD | WASHER - flat, spacer | | | 10 | H674338 | PIVOT ASSY. | BRACKET - pivot mounting | | | | REF # 10 - IF THE BRACKET HAS A NYLON BUSHING IN IT, REF # 57 PART NUMBER 72323 - NYLON BUSHING WILL WORK PER DEALER. JRB 3/6/97 | | | | 11 | D143416 | CIRCLIP,15.09mm ID x 27.81mm OD x 1.57mm Thk | RETAINER - bracket, was D95097 | | | 12 | 219-86 | LUBE NIPPLE,1/8" NPTF | FITTING - grease, straight, self-tap, 1/8 PT x 5/8 inch | | | 13 | 413-512 | BOLT,Hex, 5/16" - 18 x 3/4", Gr 5 | - hex, 5/16 NC x 3/4 inch | | | 14 | 231-5145 | SERRATED NUT,Flg, USR, 5/16"-18 | NUT - hex serrated flange, 5/16 inch NC | | | 15 | 427-6106 | CLEVIS PIN,9.53mm OD x 26.92mm L | PIN, CLEVIS, 3/8" x 1 1/16" | | | 16 | 432-616 | COTTER PIN,3/32" x 1" | 3/32" x 1" | | | 17 | E99872 | TIE-ROD | ROD - control, was D135221 | | | 18 | D63156 | SPRING CUP | SEAT - spring | | | 19 | D70304 | COMPRESSION SPRING,0.955" OD x 4.00" L | - rod | | | 20 | D137785 | BRACKET | - spring retaining | | | 21 | 425-156 | JAM NUT,Jam, 3/8"-24, G5 | - hex jam, 3/8 inch NF | | | 22 | A32398 | BALL JOINT | JOINT - ball, 3/8 inch NF, was S108030 | | | 23 | 495-11041 | WASHER,0.406" ID x 0.812" OD x 0.065" W | (Flat, 13/32 x 13/16 x 1/16") 3/8", SAE | | | 24 | 232-4116 | NUT,3/8"-16, GC | NUT, LOCK, 3/8"-16, GC | | | 25 | 413-512 | BOLT,Hex, 5/16" - 18 x 3/4", Gr 5 | - hex, 5/16 NC x 3/4 inch | | | 26 | 231-5145 | SERRATED NUT,Flg, USR, 5/16"-18 | NUT - hex serrated flange, 5/16 inch NC | | | 27 | D135102 | LEVER | BELLCRANK - shaft, was H674340 | | | 28 | 219-86 | LUBE NIPPLE,1/8" NPTF | FITTING - grease, straight, self-tap, 1/8 PT x 5/8 inch | | | 29 | 413-620 | BOLT,Hex, 3/8" - 16 x 1-1/4", Gr 5 | - hex, 3/8 NC x 1-1/4 inch | | | 30 | 495-11041 | WASHER,0.406" ID x 0.812" OD x 0.065" W | (Flat, 13/32 x 13/16 x 1/16") 3/8", SAE | | | 31 | A32398 | BALL JOINT | JOINT - ball, 3/8 inch NF, was D59922 | | | 32 | 232-4116 | NUT,3/8"-16, GC | NUT, LOCK, 3/8"-16, GC | | | 33 | 425-156 | JAM NUT,Jam, 3/8"-24, G5 | - hex jam, 3/8 inch NF | | | 34 | D66538 | SHOCK ABSORBER | ABSORBER - shock, pump controls | | | 35 | 49566 | GROMMET | - mounting bracket | | | 36 | D135164 | SUPPORT | BRACKET - mounting, shock absorber | | | 37 | 231-2446 | NUT,3/8"-24, GB | NUT - light hex, self-locking 3/8 inch NF | | | 38 | D135104 | SHAFT | - mounting | | | 39 | A30881 | SEALING WASHER,19.45mm ID x 31.35mm OD | WASHER - flat, spacer | | | 40 | R39773 | SNAP RING,#75, Ext | Ring, Snap, #75, Ext | | | 41 | 413-620 | BOLT,Hex, 3/8" - 16 x 1-1/4", Gr 5 | - hex, 3/8 NC x 1-1/4 inch | | | 42 | 495-11041 | WASHER,0.406" ID x 0.812" OD x 0.065" W | (Flat, 13/32 x 13/16 x 1/16") 3/8", SAE | | | 43 | 232-4116 | NUT,3/8"-16, GC | NUT, LOCK, 3/8"-16, GC | | | 44 | 232-4116 | NUT,3/8"-16, GC | JOINT - ball, 3/8 inch NF, was S108030 | | | 45 | 425-156 | JAM NUT,Jam, 3/8"-24, G5 | - hex, jam, 3/8 inch NF | | | 46 | E99692 | ROD | - control, right-hand, was D135213 | | | 47 | H437659 | ROD | - control, left-hand, used on diesel models | | | 48 | 129-289 | JAM NUT,Jam, 3/8"-24, G5, LH | | | | 49 | 1283151C1 | END ASSY.,3/8" - 24, LH Threads | JOINT - ball, 3/8 inch NF, was D135220 | | | 50 | 413-536 | BOLT,Hex, 5/16" - 18 x 2-1/4", Gr 5 | - hex, 5/16 NC x 2-1/4 inch | | | 51 | H674293 | LEVER | ARM - pump control | | | 52 | 232-4115 | LOCK NUT,5/16"-18, GC | NUT, LOCK, 5/16"-18, GC | | | 53 | 413-512 | BOLT,Hex, 5/16" - 18 x 3/4", Gr 5 | - hex, 5/16 NC x 3/4 inch | | | 54 | D139039 | BEARING ASSY,19mm ID | BEARING - cross shaft mounting | | | 55 | 231-5145 | SERRATED NUT,Flg, USR, 5/16"-18 | NUT - hex, flange, self-locking, 5/16 inch NC | | | 56 | H426775 | WASHER | - flat, hardened | | | 57 | 72323 | BUSHING,19.07mm ID x 28.57mm OD x 19.05mm L | - nylon, if used | |
|
|